Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC 63 2ND MAIN ROAD NGO COLONY ADAMBAKKAM CHENNAI 600 088 | CHENNAI | CHENNAI | TAMIL NADU | 600088 | L1 | Accepted-AOC Being a lowest bidder | |
| 2 | L2₹16.5 L+₹5.9 L (55.9%)Rejected-Finance M S SATHYAM ENGINEERING KOOTHANKUZHI THIRUVALLUR TAMIL NADU 600 062 | THIRUVALLUR | THIRUVALLUR | TAMIL NADU | 600062 | L2 | Rejected-Finance Being a second lowest bidder |
| Sl No | Description | Qty | Unit | EVEREST ENGINEERING WORKS L1 | Sathyam engineering L2 |
|---|---|---|---|---|---|
| 1.00S&F in repairs cast iron sluice valve IS 14846 -200 PN1.6 both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolts nuts and washers graphite rope complete all as specified and directed for the following sizes . | |||||
| 1.01 | 150 mm bore | 1 | Each | 18,300 ₹18,300 Lowest | 27,118 ₹27,118 |
| 1.02 | 100 mm bore | 1 | Each | 14,500 ₹14,500 Lowest | 22,932 ₹22,932 |
| 2.00 | Dismantling the defective electric driven centrifugal pump set of capacity 90 HP from the existing location by opening the coupling ,foundation bolts etc and transporting to the authorised workshop for repairing and reassembling after servicing and overhauling including necessary oiling/greasing, lubricating the parts , repair /replacement of worn out parts and spray paintng with one coat of existing colour paint and writing SM / MES No with white paint etc and install the centrifugal pump in its original position , commissioning and testing on full load complete all as specified and directed by Engineer-in-Charge. | 1 | Each Job | 15,500 ₹15,500 Lowest | 53,900 ₹53,900 |
| 3.00 | Dismantling the defective electric driven centrifugal jockey pump set of capacity 900 LPM from the existing location by opening the coupling , foundation bolts etc and transporting to workshop fo repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and spray paintng with one coat of existing colour paint and writing SM / MES No with white paint and install the centrifugal jockey pump set in its original position , commissioning and testing on full load complete all as specified and directed by Engineer-in-Charge.
Note for item Nos 2 & 3:- (a) Quoted rate shall be inclusive for the labour / service charges and repairing and replacement of defective spares/accessories. (b) Major spares as required during servicing shall be measured as supply only under relevant items her-in-after and other minor items/spares such as nut, bolts washers, gaskets, paints etc as required for smooth / effective functioning of the pump set shall be provided by the contractor and cost for the same shall be included in the quoted rates . | 1 | Each Job | 9,000 ₹9,000 Lowest | 21,000 ₹21,000 |
| 4.00Supply only the following spare parts as per existing suitable for monoblock / centrifugal / jockey pumpsets complete all as specified and as directed. | |||||
| 4.01 | CI impeller for Jockey pump 900 LPM | 1 | Each | 8,500 ₹8,500 Lowest | 11,900 ₹11,900 |
| 4.02 | Ball bearing for Jockey pump 900 LPM | 1 | Each | 4,200 ₹4,200 Lowest | 5,000 ₹5,000 |
| 4.03 | Motor coupling assembly with tyre for Jockey pump 900 LPM | 1 | Each | 5,450 ₹5,450 Lowest | 7,280 ₹7,280 |
| 4.04 | CI impeller for centrifugal pump set of capacity 90 HP | 1 | Each | 9,600 ₹9,600 Lowest | 14,000 ₹14,000 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
24 Nov 2025, 6:00 pmClosed
Shri Vishal Garg,IDSE,SE,SAG
CWE Chennai Pallavan Sallai Chennai
REPAIR / MAINTENANCE OF FIRE FIGHTING SYSTEM AT MH UNDER GE STM CHENNAI
2025_MES_738302_1
86613/E8
Open Tender
Civil Works
Item Rate
270 days
GE STM Chennai
As per tender documents
8 documents required · 8 mandatory
₹500
GE STM Chennai
₹20,000
Yes
20 Feb 2026
3 Nov 2025
26 Nov 2025
3 Nov 2025
24 Nov 2025
17 Nov 2025
Amount
S&F in repairs cast iron sluice valve IS 14846 -200 PN1.6 both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolts nuts and washers graphite rope complete all as specified and directed for the following sizes .
150 mm bore
100 mm bore
Dismantling the defective electric driven centrifugal pump set of capacity 90 HP from the existing location by opening the coupling ,foundation bolts etc and transporting to the authorised workshop for repairing and reassembling after servicing and overhauling including necessary oiling/greasing, lubricating the parts , repair /replacement of worn out parts and spray paintng with one coat of existing colour paint and writing SM / MES No with white paint etc and install the centrifugal pump in its original position , commissioning and testing on full load complete all as specified and directed by Engineer-in-Charge.
Dismantling the defective electric driven centrifugal jockey pump set of capacity 900 LPM from the existing location by opening the coupling , foundation bolts etc and transporting to workshop fo repairing and reassembling after servicing and overhauling complete with oiling/greasing, lubricating the parts including repair / replacement of worn out parts and spray paintng with one coat of existing colour paint and writing SM / MES No with white paint and install the centrifugal jockey pump set in its original position , commissioning and testing on full load complete all as specified and directed by Engineer-in-Charge. Note for item Nos 2 & 3:- (a) Quoted rate shall be inclusive for the labour / service charges and repairing and replacement of defective spares/accessories. (b) Major spares as required during servicing shall be measured as supply only under relevant items her-in-after and other minor items/spares such as nut, bolts washers, gaskets, paints etc as required for smooth / effective functioning of the pump set shall be provided by the contractor and cost for the same shall be included in the quoted rates .
Supply only the following spare parts as per existing suitable for monoblock / centrifugal / jockey pumpsets complete all as specified and as directed.
CI impeller for Jockey pump 900 LPM
Ball bearing for Jockey pump 900 LPM
Motor coupling assembly with tyre for Jockey pump 900 LPM
CI impeller for centrifugal pump set of capacity 90 HP
Ball bearing for centrifugal pump set of capacity 90 HP
Motor coupling assembly with tyre for centrifugal pump set of capacity 90 HP
Mild steel foundation bolts with nuts, washers etc
Supply install, connect, test and commissioning the three way fire brigade connection 63mm dia confirming to ISI 903 and ISI marked including removing the existing old three way fire brigate complete as all specified and directed
Supply, install, connect, test and commissioning the fire alarm control panel complying with BS EN 54 single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules including removing the existing old panel complete as all specified and directed .
S&F in repairs Addressable type multisensor detector with heat and smoke combination complying with and type certified to EN-45Addressable type as per IS: 11360 complete as all specified and directed .
S&F in repairs Addressable control module for monitoring complete as all specified and directed .
Renewal of unserviceable lead acid rechargeable maintenance free batteries by providing 4 Nos of new cell 12 volts, 7AH capacity ,and make the initial charging and testing on completion for fire engine all as specified and directed.
S&F in repairs Addressable electronic Sounder cum strobe all as specified and directed.
Supply ,install, testing commissioning of double action pull push type Addressable manual call point resettable glass break system, housed in MS enclosure with mounting accessories including removing the existing old call point of any description complete all as specified and directed.
Supply, install, connect, test and commission Hydrant gunmetal landing valves double outlets 63mm dia female outlets including removing the existing old female outlets of any description complete all as specified and directed.
Supply, install, connect test and commissioning rubber hose reel lined hose 20mm dia fabric lined 30 metre long with 5mm outlet brass nozzle including removing the existing old hose of any description complete all as specified and directed.
S&F in repairs stainless steel fire hose delivery coupling (Male/ Female) 63mm dia conforming to ISI 903 and ISI marked complete as all specified and directed.
S&F in repairs fire hose cabinate box of size 800mmx600mmx250 mm / as per site requirment , made from 16 gauge MS sheet duly painted with two coats of red colour synthetic enamel paint over a coat of red oxide primer with double leafed glazed shutters ( glazed with 4 mm thick glass ) suitable for housing of two length of canvas hose ,branch pipe, fire hose and nozzle, fireman axe, first aid hose and single outlet landing valve etc complete all as spcified and diected..
Taking up or down the existing unserviceable MS pipe 150mm dia from the existing fire fighting line /system including disconnecting the flanged joints and remove the pipe from site and taken away complete all as specified
Supply, fixing, jointing, testing and commissioning GI pipe 150mm bore , class "C" ISI marked, heavy grade,conforming to IS:1239-1982, including fittings such as couplings, bends, elbows and tees, screwed /flanged joints packing rubbers, nuts & bolts laid into trenches /on wall /in ducts below ground, over the floor etc as per the site requirment in long/short pieces complete all as specified and directed.
M&L for preparation of old painted surface of any description ,not exceeding 10cm in width or girth such as fire fighting pipe lines including bends, flanges, valves etc and applying one coat of heat resisting paint first quality of approved colour with colour code all as specified and directed.
Supply, laying, testing, Commissioning of 1100 volts grade, 1.5 sqmm 2 core, FRLSH, multistranded copper cable, armoured with steel strip/wire ISI marked including one run of 1.5 sqmm wire for earthing including MS, ERW, Medium grade, 20mm, ISI Marked pipe for laying of cable fixed over the wall/roof, over the surface through saddles /spacers etc for making connections to fire detectors / MCP / SIREN / to control panels etc complete all as specified and directed.
Sathyam engineering (BID ID -3490811)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
86613TENDER.pdf
Tender Documents • 0.69 MB
BOQ_826688.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .