SPL REPAIR TO BLDG NO P-133 (MT/CLK LINE) AT CHINCHORA UNDER AGE (I) BHALRA

Amount

Demolition of cement concrete of any description in any position not otherwise specifically provided for, complete all as specified.

Material and Labour for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in levelling course, rough finished, complete all as specified.

Material and Labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/Rectangular) area exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry over and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Material and Labour for Glazed ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as backing coat rough finished surface complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified.

Supplying and fixing of factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S.Square tube, suppling & fixing in opening as per specification complete all as specified and as directed.

Supplying and fixing of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and as directed.

Supply and fixing of Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked), complete all as specified.

Taking up or down steel water tubing and connections 15mm bore including cleaning for refixing or removing to store complete all as specified.

Taking up or down steel water tubing and connections 20mm bore including cleaning for refixing or removing to store complete all as specified.

Supply and fixing of 15mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors, complete all as specified.

Supply and fixing of 20mm dia GI steel water tubing, medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors, complete all as specified.

Supply and fixing of Bib taps 15mm bore (ISI marked) of cast copper alloy, chromium plated , fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Supply and fixing of Stop valve (ISI marked) of cast copper alloy, chromium plated , fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.

Supply and fixing of PVC connection 15mm size with brass nuts on both ends of length 450mm, complete all as specified.

Supply and fixing of Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of cement concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified.

Supply and fixing of PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repairs, complete all as specified and directed.

Supply and fixing of PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches or floor and fixed to walls, fixed in repair, complete all as specified and directed.

Supply and fixing of PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches or floor and fixed to walls, fixed in repair, complete all as specified and directed.

Supply and fixing of Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repair, complete all as specified.

Supply and fixing of Stop valves, 15mm bore, fcast copper alloy with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repair, complete all as specifed. .

Supply and fixing of grating doom 100mm dia of PTMT (minimum weight 25gms), complete all as specifed.

Supply and fixing of Viterous China urinal, bowl type flat back, size 430x370x340mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement including 32mm bore PVC waste pipe, fixed in repairs, complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etcomplete all as specified and directed.

Materials and Labour point wiring with multistranded copper conductor of size 1.5 sqmm PVC insulated unsheathed FRLS cable in and including not less than 2mm thick PVC casing capping 20/30mm size with accessories etc, including 1.50 sqmm copper earth wire (green colour) FRLS cable as earth continuity conductor connected to main earthing and common earth terminal for one ligh point or fan point or bell point controlled by one No, one way switch using cable of different insulation coloour for colour coding including 16 gauge mild steel sunken box/PVC box, 3mm thick laminated sheet cover for mounting fittings such as switches, sockets, fan requlators etc including cutting chases and making good to distrubed surfaces of wall/ floor, complete all as specified and as directed.

All as per the description of Serial Item No 28 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 28 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.5 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.

Supply and fixing of switch socket outlet combination, 2 in 1, 5 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and directed.

Supply and fixing of 20W surface/wall mounted box type batten LED luminaire, extruded polycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 120 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing of box type 10 Watt LED 2 feet length as mirror light, extruded plycarbonate housing with PC diffuser and integrated electronic driver with high efficiency long life, CRI=80(Minimum), PF>0.90, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, colour temperature (CCT) > 5700 + 300K, THD < 10% complete with all accessories internally prewired and including connection up with flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and as directed.

Supply and fixing of switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and directed.

Supply and fixing Ceiling rose, 3 phase/PVC/Polycarbonate, isolated body and all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, complete all as specified & directed.

Supply and fixing of electric water heater, storage type 25 ltr, BEE 5 Star rated, rust proof shock resistant ABS outer body with inner tank and heating element of capacity 2 KW with PUF Insulation designed to with stand 8 bar pressure complete with all accessories such as safety valve, thermostate, NRV, Indicator for power on and heating function including angle/stop valve and connection pipe for hot and cold water from angle/stop valve to geyser and necessary fixing arrangement by using suitable size fastener/nuts and bolts for fixing of geyser, complete all as specified and directed.

Material and labour for cutting exisitng GI pipe two cuts and insertion of tee 15x15x15mm & 20x20x20mm with nipples, unions and threading etc making dood distuebed surfaces matching with exisitng area all as specified and as directed. Note: Rate quoted by the tenderer deemend to include the provision of tee, nipples and unions .

A S CONSTRUCTION (BID ID -3117469)

Ashfaq Construction Company (BID ID -3117856)