81341 REPAIRS TO STEEL AND WOODEN FURNITURE AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

CHARPOY GI PIPE WITH PLY TOP , IP (FD-220), FD-/MAP-II/01 Removing the existing unserviceable/broken damaged ply top from "Charpoy GI pipe with ply top" and supply and fix new plywood top 7m x 3m x 12 mm thick (BWR Grade, IS 303) in iron stiffener of charpoy GI through nut , bolt and washer according to the size of the charpoy. (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) and stiffener shall be painted with 02 coat of synthetic enamel paint in black colour over a coat of red oxide primer.

Removing the existing unserviceable/broken damaged ply top from "Charpoy IP with hard top steel" and supply and fix new plywood top 7m x 3m x 12mm thick (BWR Grade, IS 303) (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)

CHAIR CB STEEL WITH ARM (FD-75(M) Removing the existing u/s wooden seat frame and replace with new seat frame made out of 2nd class hard wood 40 x 25 mm (TS) duly drilled and painted with two coat of Synthetic enamel paint black colour. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 04 Nos PVC shoes of approved quality.

Removing the existing u/s wooden back frame and supply and fix new back frame made out of 2nd class hard wood 40 x 25 mm (TS) duly drilled and painted with two coat of Synthetic enamel paint black colour. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 02 Nos PVC caps of top end of MS pipe frame of approved quality.

Removing the existing u/s broken wooden arm rest of chair and supply and fix new well seasoned 2nd class hard wood arm rest of size 400 x 50x20mm made to shape and painted with two coat of synthetic enamel paint , fixed with steels screwed from the bottom of the tubular frame all as speecified and shown in drg.

Removing the old rusted flat iron support at bottom and back of seat and replacing with new FI 20x3mm , 500mm long 02 Nos each at bottom and back having machine drilled hole at ends including in setting in MS screws of 30mm size including fixing of FI support to the steel frame by welding as shown in drg .

Preparation of old painted steel surface of chair CB steel with arm and applying one coat of olive green synthetic enamel paint .

CHAIR CB STEEL WITHOUT ARM (FD-75 (M) Removing the existing U/S wooden seat frame and replace with new seat frame made out 2nd Class hard wood 40 x 25 mm (TS) duly drilled and painted with two coat of Synthetic enamel paint black colour. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 04 Nos PVC shoes of approved quality.

Removing the existing u/s wooden back frame and supply and fix new back frame made out of 2nd class hard wood 40 x 25 mm (TS) duly drilled and painted with two coat of Synthetic enamel paint black colour. The frames are to be fixed to the tubular conduit frame, using steel screw and including provision of 02 Nos PVC caps of top end of MS pipe frame of approved quality.

Removing the old rusted flat iron support at bottom/back of seat and replacing of with new F1 20x 3mm, 400 mm long, 02 nos each at bottom and having machine drilled hole for including inserting MS screws of 30mm and fixing the same to the steel frame , by welding as shown in drg.

Preparation of old painted steel surface of chair CB steel without arm and applying one coat of olive green synthetic enamel paint including removing the rust and carryout the welding to broken portion of steel frame chairs .

TABLE DINING ORs (FD-165) Removing existing unserviceable table top from table dining ORs and replacing with new 19 mm particle board of (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)BWR grade as per ISI having dimensions 685x1900mm over which aluminium sheet 22 gauge (1965x760mm) is covered and nailed at the bottom side of the particle board as per specification.

Removing existing broken MS Squared tube 25 mm from the legs of table dining and replace with one of required length and welding to dining table where ever required all as shown in drg and as directed by engineer –in-charge and applying two coats of synthetic enamel paint black colour over a coat of red oxide primer .

CHAIR VARANDAH (FD-19/228/259) Removing the old paint /rust from the tubular frames and painting with two coats of synthetic enamel paint .

Recanning the chair varandah with new 4mm wide cane plastic (Maharashtra plastic ) of matt pattern ( as per trade pattern) to seat and back

Supply and fix new hard rubber toes to the legs from chair varandah .

Removing the broken unserviceable PVC seat of Chair varandah and supply and fix new PVC seat 4mm thick with weight not less than 1.85 KG and grooves 90mmx 10mm, 10Nos on seat as per specified in drawing and 20x6mm MS rod (2 Nos each seat) fixing the same between the seat frame by welding (FD/E6/MAP-II/06)

Removing the broken unserviceable PVC back of Chair varandah and supply and fix new PVC back 4mm thick with weight not less than 1.85 KG and grooves 90 x 10 mm 10 Nos on seat as per specified in drawing.(FD/E6/MAP-II/06)

TABLE OFFICE CLK STEEL (FD-84/1004,250) Removing the existing worn out U/S table top replacing with 19mm thick particle board (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)BWR grade one side teak veneer and otherside white balancing lamination of size 1200x600mm as are directed and shown on drg.

Removing the existing u/s locks and supply and fix new lock 50mm size with duplicate key of godrej/equivalent make suitable for drawers .

Preparation of old painted steel surface and applying one coats of synthetic enamel paint Olive Green shades internally and externally for table office clk steel .

Repair of steel table drawers by denting/welding etc to fix suitably in the channels as directed by Engr-in-C.

ALMIRAH LARGE/MED WITH SHELVES STEEL(FD-67/1032/1031). Removing the existing U/S locking device, supply and fix locking device (ISI Marked) along with suitable lock of 55/65mm with brass lever with two key chromium plated for Almirah large with shelves steel .

All as per item No 23 above , but for almirah medium with shelves steel .

Removing the existing U/S handle(ISI Marked), supply & fix new steel chromium plated handle 125mm long to the steel almirah large/ medium as per sample.

Preparation of old painted steel surface of Almirah large with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

All as per item No 26 but for almirah large with shelves steel.

CHAIR EXECUTIVE REVOLVING (TP/FD-75) M & L for provision of best quality moulded seat cushions duly covered with new upholstery cloth as per existing shape and size all as directed by Engineer -in-charge including dismantling and removing the old unserviceable seat cushions.

All as per items 28 above but molded back cushions

M& L for provision of new base of best quality (ISI Marked) as per existing shape and size all as directed by Engir-in-Charge and including dismantling & removing the old unserviceable base.

M& L for provision of new tapestry cloth as in seat / back cushion covers as per existing shape / size all as directed by Engir-in-Charge incuding dismantling removing the old unserviceable cloth (Cost of tapestry cloth provided shall not be less than 275/- RM)

Supply and fix new PU arms (Set of 02 Nos) in each chair of 1st quality as per existing shape and for chair executive revolving and as directed by Engir-in-Charge including dismanteling and removing the old unserviceable arms

Supply and fix new Hydraulic systems best quality (ISI Marked) as per existing of chair executive revolving low back / high back and size as directed by Engir-in-Charge including dismanteling & removing the old unserviceable material

CHAIR COMPUTER (TP/SPL) M & L for provision of best quality moulded seat cushions duly covered with new tapestry cloth as per existing shape and size all as directed by BSO including dismantling and removing the old unserviceable seat cushions.

All as per items 34 above but molded back cushions

M & L for provision of new base of best quality (ISI Marked) as per existing shape and size all as directed by Engir-in-Charge and including dismantling & removing the old unserviceable base.

Supply and fix new PU arms (Set of 02 Nos) in each chair of 1st quality as per existing shape and for chair executive revolving and as directed by Engir-in-Charge including dismanelting and removing the old unserviceable arms

Supply and fix new Hydraulic systems best quality (ISI Marked) as per existing of chair executive revolving low back / high back and size as directed by Engir-in-Charge including dismanteling & removing the old unserviceable material

BED HARD STEEL (FD/E6/MAP/08 (R)) Removing of Broken plywood Top and supply and fix new plywood 12 mm thick commercial face (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) with BWR grade (water proofing, IS 303) according to the size and shape as per drawing.

RACK SHOE STEEL (FD/E6/MAP/02 (R)) Removing existing broken 3mm dia MS rod from the shelfs of rack shoe steel and replace with one of required length and welding to rack shoe steel where ever required all as shown in drg and as directed by engineer –in-charge and applying two coats of synthetic enamel paint black colour over a coat of red oxide primer .

LOCKER BEDSIDE STEEL (FD-1029/257)

a) Piano hinges steel 30 x 780mm long fixed with required screws.

b) Aluminium 'D' handle 100mm long with screw & washer.

c) Aluminium Hasp & Staple 75mm with screw.

d) Aluminium rail 18mm dia 300mm long with both socket fixed with screw all as directed.

e) Preparation of old painted steel surface of locker bed side steel with shelves and spray painting with one coat of synthetic enamel paint olive green shade on both internal and external surfaces.

Description of Work / Item(s)

Amount

BED HARD (PLYWOOD TOP) (FD-246) Removing existing broken long rail and supply and fix 2nd class. hardwood well seasoned long rail made to shape as per drg with dimension of 35 mm x 90 mm x 1980 mm.

Removing of Broken plywood Top and supply and fix new plywood 12 mm thick commercial face (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) with BWR grade of size 1800 mm x 900 mm all as per drg.

Preparation of wood surface with emery paper and applying two coats of french polish all as directed as Engineer-in-Charge.

RECANNING OF CHAIRS.(FD-229, FD-281, FD-211, FD-118 & FD-280) Removing the unserviceable / wornout cane plastic and re-canning the chairs of Chair Easy, Chair Writing, Chair dining chair D’ Man and stool dressing, with 2 mm plastic cane in centre and beading with 4 mm of white plastic cane superior quality including supply of plastic canes all as specified and shown on drawings.

(FD-279 FD/MAP-II/05) Removing the unserviceable / wornout cane plastic from Chair dining and S&F PVC seat 4mm thick with holes with 02 Nos (20mmX04mm) thick MS flat in each seat at equal distance,all as specified and as directed as Engineer-in-Charge.

FORM WITH/WITHOUT BACK (FD-77/78) Removal of U/S top of form with & w/o back size 1800x250x 25mm and supply & fixing new teak wood plank tops of size 1800x250x25mm duly polished to the existing frame with necessary nuts & bolts as per drg as specified and as directred by Engr-in-charge.

Removal of U/S back of form with back size 1800x150x 19mm and supply & fixing new teak wood planks back of size 1800x150x19mm duly polished to the existing frome with necessary nuts & bolts as per drg as specified and as directred by Engr-in-charge.

TABLE DINING 6/8 PERSONS (FD-239) Removal of existing U/S legs replacing with new legs made out 1st class hard wood (Teak wood) 60 x60 mm at top 40 x40 mm at bottom 760mm long including providing hard rubber ring screwed. With 3 mm thick TW bearing all around all as directed and shown on drg.

Removing the existing U/S top and supply and fix with new table top 6’ x 3’ made out of 19mm one side teak veneered particle board with 3 mm thick TW beading all as directed and shown on drg .(Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)

Removing the existing damaged braces (Side Rails) on the longer side replace with new 1st class hard wood(TW) size 25 x 100 x 1420mm all as directed and shown on drg.

Removing the existing damaged braces ( shorter rails) on the shorter side replace with new 1st class hard wood (TW) of size 25 x100x 640 mm all as directed on shown on drg .

TABLE 3'x 2' WITH / WITHOUT DRAWER (ED-224) Removing the existing U/S top and replacing with new table top 900 x 600 mm, made of 19 mm one side teak veneered particle board with 3 mm thick TW beading all around . (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)

Removal of existing U/S legs replacing with new legs made out 1st class hard wood (Teak wood) 60 x60 mm at top 40 x40 mm at bottom 760mm long including providing hard rubber ring screwed with 3 mm thick TW bearing all around all as directed and shown on drg.( (FD-239)

Removing the existing damaged braces (Side Rails) on the longer side replace with new 1st class hard wood(TW) size 25 x 100 x 1420mm all as directed and shown on drg.(FD-239)

Removing the existing damaged braces ( shorter rails) on the shorter side replace with new 1st class hard wood (TW) of size 25 x100x 640 mm all as directed on shown on drg .(FD-239)

Table dining 1200x900mm Removing the existing U/S top and replacing with new table top 1200 x 900 mm, made of 19 mm one side teak veneered particle board with 3 mm thick TW beading all around .(Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) (FD-239)

Removal of existing U/S legs replacing with new legs made out 1st class hard wood (Teak wood) 60 x60 mm at top 40 x40 mm at bottom 760mm long including providing hard rubber ring screwed with 3 mm thick TW bearing all around all as directed and shown on drg.(FD-239)

Removing the existing damaged braces (Side Rails) on the longer side replace with new 1st class hard wood(TW) size 25 x 100 x 1420mm all as directed and shown on drg.(FD-239)

Removing the existing damaged braces ( shorter rails) on the shorter side replace with new 1st class hard wood (TW) of size 25 x100x 640 mm all as directed on shown on drg .(FD-239)

TABLE 900 x 900 mm (FD-67) Removing the existing U/S Top and replacing with new table top 900 x 900 mm made of 19 mm one side teak veneered particle board. with 3 mm thick TW beading all around.(Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)

TABLE WRITING (FD-249, FD-275) Removing the unserviceable top of table writing and supply and fix new top made out of 18 mm thick prelaminated particle board one side teak veneered and other side white in colour of size 1145x600 mm with 4mm thick teak wood edging all around as shown drg and as directed . (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)

Removing the unserviceable top drawer of table writing and supply and fix new drawer of size 490x370x100 mm made out of sides with 6 mm thick plywood and bottom with 12mm thick teak wood plank as shown in drg as directed .

Removing the unserviceable bottom shutter of table writing and supply and fix new bottom shutter of size 370x470 made out of 18 mm thick pre laminated particle board with 4mm thick teak wood edging around including all fitting & fixtures as shown in drg and as directed .

Removing the unserviceable stiffener of table writing and supply and fix stiffener of size 50x25x1145mm made out of TW as shown in drg duly polished with French polish to give a glossy appearance all as specified.

Removing the unserviceable leg of table writing and supply and fix new leg of size 55x35x760mm made out of TW duly grooved 5 mm x 5mm in top as shown drg duly polished with French polish to give glossy appearance all as specified and as directed .

Removing the unserviceable plywood of back drawer and supply and fix new plywood 6mm thick of size 410x610mm as shown in drg and as directed .

Removing the unserviceable side portion of drawer and supply and fix new side portion made out of 18 mm thick ply wood one side thick veneered and other side commercial of size 610x560mm with 4mm thick TW beading al around as shown in drg duly French polished over TW edging .

TABLE DRESSING LADIES FD/E6/MAP/II/07 Removing of unserviceable old defaced mirror unserviceable back ply wood of mirror frame of table dressing ladies and providing new sheet glass electro copper plated mirror 5mm thick and new plywood commercial BWR grade 6mm thick ply for back side of mirror frame and fixing to table dressing ladies including French polishing to frame to all as directed and specified and shown on drg.

Removing of unserviceable/chipped/old 18mm thick Pre laminated particle board of size 450 x 380 and fix new pre laminated particle board 18mm thick of size 450 x 380mm on the top of dressing table between the drawer as per shows on drg.

Repair of dressing table Ladies drawers to fix suitably in the channels all as directed by Engineer-in-charge.

SIDE BOARD (FD-26, FD-241) Removing the unserviceable door of side board and supply and fix new 18mm thick prelaminated particle board natural thick shade one side and other side white in two parts of size 835 x 655mm duly complied with piano hinges knobs ,locks etc as shown in drg and as directed. (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent)

Removing the unserviceable particle board of side portion of side board and supply and fix new 18 mm thick prelaminated particle board one side natural thick and other side white of size 455x625mm as shown in drg and as directed.

Removing the unserviceable plywood from back side of side board and supply and fix new ply wood of size 625x1100mm , 6 mm as shown in drg and as directed.

Removing the unserviceable legs with frame of side board and supply and fix new frame of size 1050x360mm made out of TW stiffeners of size 25x45mm all around with 4 nos legs made out of 45x45mmx125mm on top and 25x25x125mm at bottom as shown in drg and as specified .

Removing the unserviceable drawers of side board and supply and fix new drawer sets consisting of 04 nos as shown in drg and as specified and as directed . (04 nos of drawers will be measured as a single unit)

Removing the unserviceable bottom of side board and supply and fix new bottom made out of 18 mm thick pre laminated particle board both side commercial of size 1220x460mm as shown in drg and as directed .

Removing the unserviceable top of side board and supply and fix new top board made out of 18 mm thick particle board one side teak face of size 1220x460mm as shown in drg and as directed .

CHAIR DINING(FD-228, FD-279) Removing the existing unserviceable rear leg from chair Dining and Supply and Fix new Teak wood Rear leg of size 55x30x890mm made to shape as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable front leg from chair dining and supply fix new TW front leg of size 30x65x440 mm made to shape as shown on drg and as specified duly French polished to existing shade .

Removing the existing unserviceable side rail from chair dining and supply and fix new TW side rail of size 30x55x430mm made to shape as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable rear rail from chair dining and supply and fix new TW rear rail of size 30x60x405mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable stiffner from from chair dining and supply and fix new TW stiffner of size 20x25x430mm made to shape as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken top rest from chair dining and supply and fix new TW top rest of size 45x15x440mm made to shape of 45x35x440 mm as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the old unserviceable ply top with cushion from the chair dining officers and supply and fix new 12mm ply top with cushion 75mm thick and 40 density foam cushion covered with long cloth and shall be tapestry cover of quality not less than Rs. 275 per mtr as specified in drg and approved by GE.(FD/E6/MAP-II/04)

CHAIR EASY (FD-227, FD-17) Removing the existing unserviceable broken front leg from chair easy and supply and fix new TW front leg of size 55x25x490mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken rear leg from chair easy and supply and fix new TW rear leg of size 55x25x490mm made to shape shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken front rail from chair easy and supply and fix new TW front rail of size 55x25x510mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken rear rail from chair easy and supply and fix new TW rear rail of size 55x25x480mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken side frame from chair easy and supply and fix new TW side frame of size 70x40x545mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken arms from chair easy and supply and fix new TW arms of size 65x25x610mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

Removing the existing unserviceable broken back rest from chair easy and supply and fix new TW back rest of size 440x510mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed .

CHAIR WRITING (FD-250, FD-280) Removing the existing unserviceable broken front leg from chair writing supply and fix new TW front leg of size 55x20x460mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken rear leg from chair writing and supply and fix new TW rear leg of size 55x30x890mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken front rail from chair writing and supply and fix new TW front rail of size 65x30x535mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken side rail from chair writing and supply and fix new TW side rail of size 65x30x470mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken back rest from chair writing and supply and fix new TW back rest of size 50x15x470 made out of 50x35x470mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken top back frame from chair writing and supply and fix new TW top back frame of size 50x15x535mm made out of 50x35x470mm made to shape all as shown on drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken stiffener from chair writing and supply and fix new TW stiffener of size 20x25x535mm made to shape as per drg duly polished with French polish to give a glossy appearance all as specified and as directed.

Removing the existing unserviceable broken arm rest from chair writing and supply and fix new TW arm rest of size 60x25x470mm made to shape as per drg duly polished with French polish to give a glossy appearance all as specified and as directed.

TABLE PEG(FD-277/236) Removing of unserviceable/broken top of table peg and providing new top 18/19mm thick pre laminated particle board teak shade (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) exterior grade with 3mm thick teak wood edging all round duly fixed all as specified directed and shown on drg.

Removing unserviceable broken legs and providing new legs made out of teak wood for table peg all as directed specified and as shown on drg.

Removing unserviceable broken side short rail and providing new side short rail made out of hard wood for table peg all as directed and specified on drg.

Removing unserviceable broken side long rail and providing new side long rail made out of hard wood for table peg all as directed and specified on drg.

TABLE CENTRE(FD-235/375) Removing of unserviceable/broken top of table centre and providing new top 18/19mm thick prelaminated particle board teak shade (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) exterior grade with 3mm thick teak wood edging all round duly fixed all as specified directed and shown on drg.

Removing unserviceable broken legs and providing new legs made out of teak wood for table centre all as directed specified and as shown on drg.

Removing unserviceable broken side short rail and providing new side short rail made out of hard wood for table centre all as directed and specified on drg.

Removing unserviceable broken side long rail and providing new side long rail made out of hard wood for table centre all as directed and specified on drg.

TEAPOY WOODEN (FD-238) Removing of unserviceable/broken top of Teapoy wooden and providing new top 18/19mm thick prelaminated particle board teak shade exterior (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) BWR grade with 3mm thick teak wood edging all round duly fixed all as specified directed and shown on drg.

Removing unserviceable broken legs and providing new legs made out of teak wood for teapoy wooden all as directed specified and as shown on drg.

Removing unserviceable broken side short rail and providing new side short rail made out of hard wood for teapoy wooden all as directed and specified on drg.

Removing unserviceable broken side long rail and providing new side short rail made out of hard wood for teapoy wooden all as directed and specified on drg.

TABLE BEDSIDE (FD/E6/MAP-II/15(R ) Removing unserviceable MS Handles and providing new MS Handles for Table bedside all as directed and specified on drg.

Removing unserviceable PVC Shoes and providing new PVC Shoes for Table bedside all as directed and specified on drg.

TABLE BEDSIDE(FD-248) Removing unserviceable broken top and providing new top 18mm/19mm thick prelaminated particles board teak shade exterior (Make : Golden ply ISI/Royal plywood ISI/Kit ply/equivalent) grade for table bed side all as directed specified and shown on drg.

Removing unserviceable broken back of table bed side and providing new 6mm thick ply wood according to the shape and size of table bed side as shown on drg.

SOFA SET 4/5 SEATER (FD-258) Removal of old unserviceable seat cushion of safa set and providing new seat cushion of 40 dencity foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 275 per mtr as specified in drg and approved by GE

Removal of old unserviceable back cushion of safa set and providing new back cushion of 40 dencity foam 100mm thick covered with long cloth and shall be tapestry cover of quality not less than Rs. 275 per mtr as specified in drg and approved by GE

POLISHING Preparation wooden surface with sand papers and applying two coat of French polish all as directed by Engineer-in-Charge for the following items.

Peg Table (FD-277/236)

Table bed side (FD-276)

Table Centre (FD-274)

Teapoy wooden (FD-232)

Table 3x2 wooden with and without drawer (FD-283)

Foam with back (FD-77)

Foam with out back (FD-77)

Chair dining (FD-228)

Chair writing (FD-250)

Chair wooden bottom (FD-225)

Bed with plywood (FD-246)

Table dressing gents (FD-230)

Table dressing ladies (FD-251)

Table dining 6/8 per (FD-273)

Stool dressing FD-251

Table writing (FD-249, FD-275)

Chair eassy FD-229

Chair dining (FD/E6/MAP-II/04)

SRI CHAKRA CABINETS

M/s KM Marimuthu Achary

M/s KM Marimuthu Achary

SRI CHAKRA CABINETS