Special M and R of Miscellaneous Civil Works of old Barrack and Mess situated in CISF colony, ATP, Anpara.

DSR No. 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.

DSR No. 2.6.1 All kinds of soil

DSR No. 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

DSR No. 2.8.1 All kind of soil

DSR No. 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level

DSR No. 4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

DSR No. 4.1.6 1:3:6 (1 Cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size)

DSR No. 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

DSR No.5.1- Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

DSR No.5.1.2- 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

DSR No.18.49- Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

DSR No.18.49.1- 15 mm nominal bore

DSR No. 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

DSR No. 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

DSR No. 5.9.3 Suspended floors, roofs, landings, balconies and access platform.

DSR No. 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

DSR No.5.22.6- Thermo-Mechanically Treated bars of grade Fe-500D or more.

DSR No. 6.1 Brickwork with common burnt clay FPS(non-modular) bricks of class designation 7.5 in foundation and plinth in:

DSR No. 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

DSR No. 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

DSR No. 6.4.2 Cement mortar 1:6 (1:cement : 6coarse sand )

DSR No. 18.56 Providing and fixing PTMT pillar cock of approved quality and colour.

DSR No. 18.56.1 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

DSR No. 6.13 Half brick masonry with common burnt clay FPS non modular bricks of class designation 7.5 in super structure above plinth level up to floor V level

DSR No. 6.13.2 Cement mortar 1:4 (1cement :4coarse sand)

DSR No. 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

DSR No. 7.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :

DSR No. 7.1.1 Cement mortar 1:6 (1 Cement : 6 coarse sand)

DSR NO. 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

DSR NO. 9.1.3 Kiln seasoned and chemically treated hollock wood

DSR No.9.9- Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

DSR No.9.9.2- Kiln seasoned and chemically treated hollock wood

DSR No.9.9.2.1- 35 mm thick

DSR NO. 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

DSR NO. 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

DSR No.9.21.3- 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

DSR No 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

DSR No 9.47.2 25 mm dia (heavy type)

Based on DSR 9.51.1 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete but excluding beading.

DSR No.9.53- Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

DSR No. 9.55 Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete.

DSR No. 9.55.2 100x58x1.90 mm

DSR No. 9.55.3 75x47x1.70 mm

DSR No. 9.62 Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :

DSR No. 9.62.2 250x16mm

DSR No. 9.63 Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

DSR No. 9.63.2 200x10mm

DSR No. 9.66 Providing and fixing ISI marked oxidized M.S. handles conforming to IS:4992 with necessary screws etc.complete:

DSR No. 9.66.1 125 mm

DSR No. 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

DSR No.10.3- Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

DSR No.10.5- Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

DSR No.10.5.2- Using flats 30x6 mm for diagonal braces and central cross piece

DSR No.10.22- Welding by gas or electric plant including transportation of plant at site etc. complete.

DSR No. 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

DSR No. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

DSR No.11.39- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/Sqm including grouting the joints with white cement and matching pigments etc.complete.

DSR No. 13.4 12 mm cement plaster of mix :

DSR No. 13.4.2 1:6 (1 cement: 6 coarse sand)

DSR No. 13.5 15 mm cement plaster on rough side of single or half brick wall of mix

DSR No. 13.5.2 1:6 (1 cement: 6 coarse sand)

DSR No 13.16 6 mm cement plaster of mix :

DSR No.13.16.1- 1:3 (1 cement : 3 fine sand)

DSR No. 13.18 Neat cement punning.

DSR No. 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

DSR No. 14.5.1 Float glass panes of thickness 4 mm

DSR No. 14.9 Renewal of old putty of glass panes (length)

DSR No.14.72- Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

DSR N0. 14.83 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

DSR No. 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 Metres lead as per direction of Engineer - in - charge.

DSR No. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

DSR No. 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 Metres lead as per direction of Engineer - in- charge.

DSR No. 15.7 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Metres lead as per direction of Engineer-in-charge.

DSR No. 15.7.4 In cement mortar

DSR No. 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 Metres lead.

DSR No.15.23- Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 Metres lead.

DSR No.15.23.1- For thickness of tiles 10 mm to 25 mm

DSR No. 17.13 Providing and fixing white vitreous china water closet squatting pan (Indian type) :

DSR No. 17.13.2 Orissa pattern W.C. pan of size 580x440 mm

DSR No. 17.15 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

DSR No. 17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

DSR No. 17.18.1 10 litre capacity - White

DSR No. 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

DSR No. 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

DSR No. 17.25 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :

DSR No. 17.25.1 Flat back wash basin of size 630x450 mm

DSR No. 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

DSR No. 17.28.1 Semi rigid pipe

DSR No. 17.28.1.1 32 mm dia

DSR No. 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

DSR No. 17.35 Providing and fixing soil, waste and vent pipes :

DSR No. 17.35.1 100 mm dia

DSR No. 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729

DSR No. 17.35.2 75 mm diameter :

DSR No. 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

DSR No. 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :

DSR No. 17.37.1 For 100 mm dia pipe

DSR No.17.37.2 For 75 mm dia pipe

DSR No. 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

DSR No. 18.21.2 45 cm length

DSR No.18.21.2.1 15 mm nominal bore

DSR No. 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

DSR No. 19.1.2 150 mm diameter

DSR Based- Providing C.P. brass waste for wash basin /sink

DSR(M1951+15%)- 32 mm dia

DSR(M1952+15%)- 40 mm dia

NSR- P/L chicken mess over roof after cleaning of roof but before laying c.c. including cost of all material, labour and T&P etc. required for proper completion of work

NSR P/F GI Plain sheeet of 22 gauge ( 0.8mm thick ) including cost of GI plain sheet complete .

N.S.R. Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

N.S.R. Providing and fixing of P trap C.I. 100 NB

DSR No.18.18- Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

DSR No.18.18.1- 15 mm nominal bore

DSR No.18.12-Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

DSR No.18.12.1-15 mm dia nominal bore

DSR No. 1.1.1 Carriage of rubbish of building materials, cinder rubbish, earth and excavated rock, brick bats etc. by mechanical transport including loading, unloading and disposal up to 2.00 Km.

DSR No.13.88- Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

DSR No.13.91- Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

DSR No.13.87- White washing with lime to give an even shade :

DSR No.13.87.1- Old work (two or more coats)

DSR No.13.41.1- Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

DSR No.13.109- Finishing walls with water proofing cement paint of required shade :

DSR No.13.109.2- Old work (one or more coats applied @ 2.20 kg/10 sqm) complete

DSR No.13.61- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

DSR No.13.61.1- Two or more coats on new work