Renovation of Conference Hall and Construction of Dining Hall and Kitchen at Existing Open Space in 4th Floor at Krishi Bhawan, Ranchi

Amount

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33

mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T section shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.

Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS 13958-1994 including providing and fixing to frame work made of 50mmx50mm hard wood plugs including cutting brick work and fixing in cement mortar and making good the wall etc and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc.with iron screws all complete as per direction of E/I

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below. 1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos 2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs 3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs. 4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed door comprising of UPVC multi-chamberred frame,sash and mullion(where ever required)extruded profiles duly reinforced with 1.60±0.2mm thick galvanized muld steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension,EPDM gasket,zinc alloy(white powder coaated)3D hinges and one handle on each side of panels along with zinc plated mild steel multi point lockinghaving transmission gear,cylinder with keeps and one side key,G.I.fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws,etc.Profile of frame &sash shall be mitred cut and fusion welded at all corners,mullion(if required)shall be fusion welded including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacement finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality all complete as per approved drawing & direction of E/I.(Single/double glass panes and sillicon sealent shall be paid separately)variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note-for uPVC frame,sash and mulion extruded profiles minus 5% tolerance in dimension i.e.in depth &width of profile shall be acceptable.

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws, excludingpanelling which will be paid for separately, all complete as per direction ofEngineer-in-charge. 35 mm thick shuttersSecond class teak wood

ProvProviding and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm)

S/F/F 38mm thick wood block flooring of first class Teak wood laid over 25mm thick leveling layer of cement concrete 1:2:4(1 cement:2 coarse sand :4 gadd stone aggrgat 10mm nomina size) to be paidseparately coatd with a thin layer ofhot bitmen penetration 80/25(blowqn type) @ 2.45 kg per sqmm including fixing blocks in position after dipping in hot bitumen(blowntype) up to half depth.planed levelled smooth and finished complete job.

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facials and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels.(Green marble)

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes

Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.(size 800x600mm)

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

providing Tor steel reinforcement of 8mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(8mm dia )

providing Tor steel reinforcement of 10mm,dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

providing Tor steel reinforcement of 12mm,16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Providing two coats of synthetic enamel paint over a coat of red oxidized paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.E/l.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

15mm nominal outer dia pipes

20mm dianominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work)

25mm dianominal dia pipes

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including paintingof fittings and brackets, cutting and making good the walls whereverrequire: White Vitreous China Wash basin size 550x400 mm with apair of 15 mm C.P. brass Single hole basin mixere

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

75mm dia

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Single Tee with door 75x75x75mm

Single Tee with door 110x110x100mm

Bend 87’5 75mm dia

Bend 87’5 110mm

Coupler 110mm dia

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white 15X15cm Tiles.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with conduit With pino type switch phenolic laminated sheet Suitable size PVC/G.I Box etc. as required.

group C

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

5/6 Amps 3pin 5/6 Amp socket

5/6 amps,3 socket outlet

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

2 x 4 sq mm +1 x 4 dsq mm earth wire

S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required.

S/F Suitable size G.I./PVC Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

Supply of ceiling ceiling Fan 56"(1400mm) BLDC 5 STAR IS 374:2020 including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

Supply of metal Exaust Fan 15"(380mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

I.T.C of ceiling fan including wiring the down rods of standard length(up to30cm) with 1.5 sqmFRPVC with1.5sqmmFRPVCinsulated copper conductor single core cable etc as reqd.

I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd.

S/F”C” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"C" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps , single pole

Providing and fixing of XLPE,PVC Aluminium armoured cable of grade 1.1KV as per IS 7908(part-1)1988 etc as required make Havells/Finolex/polycab/2 core 16mm 1.1. K.V

Supplying fitting and fixing 18/20 watt LED Down light including all complete job as per direction of E/I.

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230 V 50Hz,single phase supply etc.complete as required.

20/32 W LED Tube light

Supply of 2.0 Tr.5 star split A.C.(inverter type) IS 1391-part-1 including all complete job.

Supply of out door stand for 2 qtr splite AC including all complete job.

Supply of Copper pipe for AC including all complete job.

Supply of sitc drain water pipe insulation 20mm including all complete job.

Supply of Recess Mounting LED panel light 2x2(36W) approved quality including all complete job .

Providinng and fixing auminium die cast body tubular type universal hydrauic door closer ( having brand logo with ISI.IS:1564,embossed on the body,door ,weight upto 35kg and door width upto 700mm) with necessary accessories and kscrews etc complete.

Providing fitting and fixing of Roller BLIND approved brand,quality and shade as per building specification and direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Sutanu Kumar