Renovation of Room and Construction of Toilet for DCPCR at

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required Group C.

Wiring for light/ power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 Sq.mm FRSL PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4 x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit along with 2 Nos. 4 sq.mm FRSL PVC insulated copper conductor single core cable for loop earting as required.

Wiring for circuit / submain wiring along with earth wire the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit as required. a)2x1.5sqmm+ 1x1.5Sqmm earth wire.

Wiring for circuit /submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required a) 2x2.5 sq mm+1x2.5 sq mm.

b) 4 x 2.5 Sqmm+ 2 x 2.5 Sqmm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch , connection etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. a) 1 run of cable

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel ,MCB distribution board, 415 volts, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator). a).4 way (4 + 12 way) Double Door

Supply & fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 8 way, Double door.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, ”C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

b) Double pole 63 amps

c) Triple pole and neutral 100 amps

Supply & Fixing of following sizes of medium size PVC conduit alongwith accessories in surface/recess i/c cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. a) 8 Module (125 mm x 125 mm)

b) 12 Module (200 mm x 150 mm)

Supply and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch

Supplying and fixing of two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc .as required.

Laying of 1 no PVC insulated PVC sheathered Al. conductor, armouned cable of following sizes Direct on the surface & fixing with the help of suitable size of saddles clamps etc i/c .thimbling the cable, connection testing etc. as reqd. a)4 x 25 Sqmm

b)2x 10 Sqmm

Supply and fixing call bell/buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing of I.O Box as per approved class suitable for Cat-VI cable i/c connection testing etc as reqd.

Supplying and fixing of PVC box on surface/recessed suitable for 2 Nos modular switch and 3 No. socket and suitable size modular sheet cover in the front i/c P/F pin 5/6 AMP modular socket out let and 5/6 Amps modular switch connection, testing etc. as reqd.

Supplying and installation ,testing and commissioning of ceiling fan of 1200mm 48” i/c wiring the down rod of reqd. size with 1.5 sqmm FRSPVC insulated, copper conductor single core cable etc. as reqd.

Supplying of 1 no PVC insulated PVC sheathered Al. conductor, armouned cable of following sizes as reqd. a)4 x 25 Sqmm

b)2x 10 Sqmm

Supply & fixing of 2’x 2’size of 36 watt LED light fittings same as (Model No. LCPL-36 CDL) of Crompton make with the help of chain etc. i/c connection,testing etc. as required.

Supply, Installation, Testing and Commissioning of 9Urack with PDU strip(5Amp) cable manager on the wall with the help of hole fasteners etc

Supply ,Installation ,Testing and Commissioning of D Link/Neat gear 24/10/100/1000 switch in the Rack including connection ,testing etc. as required.

S/I/T/C of Exhaust fan (12”) heavy duty steel body etc. complete as required.

Supply, Installation of RJ-45 Connector including connections, Testing etc. acomplete as required.

Supply & Installations of 15W round type white LED ceiling fittings i/c connection, testing etc. complete as required.

Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. (a) Thickness 0.63 mm sheet

Supply and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “ O” ) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. (a) 19 mm

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

K and S Engg. Works

M/S NEW JAGDAMBA ELECTRIC WORKS