KMC/EE/WS/GRWW/24-25/PH-II/06

Amount

REPAIRING OF THE EXISTING EMBEDED PART OF THE GATE ASSEMBLY OF SIZE 1200 MM(L) X 900 MM(W) X 25 MM(T) THOROUGHLY AS REQUIRED TO REACH THE TRUE SHAPE AND AS PER DIRECTION OF THE E.I.C.

Supply and delivery of the following bearing (Make: SKF):32210

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (ii) 20 mm dia bolt. (a) 300 mm long

SUPPLY, DELIVERY AND POURING SERVO GREASE MP 3 LUBRICANT, MAKE: IOC.

Removing old paint from blistered painted surface with application of soda, sajimati or any approved chemical paint remover and exposing the original surface including cleaning and thorough washing to remove all traces of the removing agent including taking out shutters and refixing the same where necessary.N.B.: (Payment against item (1, 2, 3, 4) of subhead B will be made only when done at specific direction of the Engineerin- charge. Cost of taking out shutter etc.for this item and rehanging the same or changing glass panes cracked or broken in the operation will be deemed to be covered by the rate of this item and no seperate payment therefore shall be made.)

TESTING COMMISSIONING & TRAIL RUN OF THE WHOLE DRAW SHUTTER ASSEMBLY OF SIZE 1200 MM(L) X 900 MM(W) X 25 MM(T) FOR A PERIOD OF 72 HOURS AS PER DIRECTION OF THE E.I.C.

PATHAK ENGINEERING CORPORATION (BID ID -5252501)

S S ENTERPRISES (BID ID -5269892)