SPECIAL REPAIR TO CERTAIN ROADS IN KAMPTEE UNDER GE KAMPTEE.

Amount

Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc by using pressure air ,cutting around edges to atleast 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed bituminous macadam, binder and chippings), depth of pot holes exc 30mm complete all as specified and as directed. (10 + 02)

Material & Labour for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove loose dirt etc. complete and applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm on black top surface using mechanical sprayer complete all as specified and as directed (150+0)

Material and labour for premix bituminous macadam laid , rolled and compacted to required gradient and camber using 8 to 10 tonne power roller with paving bitumen (VG -30) any penetration laid / rolled and compacted to required gradient and camber(consolidated thickness 75mm or less) using binder content of 4% by weight of total mix, complete all as specified and directed. (75+0)

Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with mechanical equipments and clean the surface by using pressure air to remove all loose dirt etc., complete all as specified and as directed.(216+69)

Material & Labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on existing black top surfaces/on existing surface before laying of Asphaltic semi dense concrete by using mechanical sprayer, complete all as specified and as directed. (405+69)

Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness by using 5.5% binder content (minimum) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. (405+69) Note: The work shall be executed by using hot mix plant and mechanical paver.

Material & Labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5 mm thick single coat as in center line and edge line road marking of 150/100 mm width using 'HOT MARK' thermolastic modern propelled road marking machine as directed including all ingredients such as binder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No. 800.4 of MORTH specification including spraying of glass beads etc., all as per manufacture instructions and as directed by Engineer-in-Charge. (450+ 50)

Supply and fixing solar studs size 125 x 125 x 25 mm aluminium alloy and polycarbonate stud, (Red/ Yellow LED's) 3 + 3 LED's with shank in tough aluminium diecast body with stem, complete as per MORTH/ IRC specifications and manufacture's instruction, complete all as specified and and directed. (365+2)

Surface dressing not exceeding 15cm deep and getting out in soft/loose soil for road side berms complete all as specified and as directed.( 1200+490)

Material & Labour for spreading moorum/ red bajri in road berms 100mm spread thickness for light wearing surface, spread, rolled, consolidated to gradient and camber required , complete all as specified and directed. (120+20)

Surface excavation not exceeding 30 cm depth and averaging 15 cm deep and getting out in hard / dense soil, complete all as specified and directed. (1050+0)

Material & Labour for 75 mm thick PCC 1 : 4 : 8 Type D-2 (using 40 mm graded stone aggregate), as in sub base of paths, hard standing and similar works complete all as specified and as directed. (1050 + 0)

Material & Labour for machine pressed pre-cast concrete interlocking tiles (paver block) any shape, colour and size confirming to IS-15658-2006 of 60 mm thick by using M-35 grade concrete with grey cement and pigment, complete all as specified and as directed. (1050+30)

Material & Labour for machine pressed pre-cast concrete interlocking tiles (paver block) any shape, colour and size confirming to IS-15658-2006 of 80 mm thick by using M-40 grade concrete with grey cement and pigment, complete all as specified and as directed. (0+460)

Material & Labour for stone dust filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. (52.5+24.5)

Material & Labour for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregates) as in foundations, filling under hardstanding/ pavement and mass concrete complete all as specified and directed.(33+0)

Supply and fix regular delineators made out of MS pipe of 75mm dia with powder coating (stove enamelled paint), 120 cm long with 3 Nos 100mm wide prismatic reflective sheeting colour coding as approved and provided with reinforced mesh all as specified and directed and as per manufacturer's instructions complete. (150+0)

Material and labour for providing and laying at or near ground level factory made kerb stone as approved of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and directed.(50+14) Note: Make and size shall be as approved by GE.

Removal of excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.(0+49)

Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above ground level), complete all as specified and as directed.(0+4.5)

Material and labour for chequered cement concrete tiles 30 cm x 30 cm x 25mm thick set, laid over and including 20mm thick screed bed or bedding layer in CM 1:6 jointed and pointed in neat cement slurry with grey cement and no pigment in floors, complete all as specified and as directed.(0+50)

Material and labour for hardcore of broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.(0+3)

Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub base to floors finished rough to received top layers, complete all as specified and as directed.(0+460)

Material and labour for cement concrete 1 : 2 : 4 Type B-1 (using 20 mm graded stone aggregate), as in floor, concrete surface finished even and smooth without using extra cement, complete all as specified and as directed.(0+3.8)

Material and labour for cement concrete 1 : 2 : 4 Type B-1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses, parapets and railing upto 60cm in height, copings and similar articles etc., complete all as specified and as directed. (0+0.8)

Material and labour for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade "B", complete all as specified and as directed. (0+8.4)

Material and labour for preparation of new or previously untreated surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of luminous paint over a coat of primer (zebra pattern) on concrete surfaces, complete all as specified and as directed. (0+46) Make: As approved by GE.

M/s Jagdish Staioners and General Stores

M/s Ajeet Kumar Singh

LAL AND SONS

VIJ ASSOCIATES

Bidder Name

M/s Ajeet Kumar Singh

LAL AND SONS

VIJ ASSOCIATES

M/s Jagdish Staioners and General Stores

M/s SHREE SAIBABA CONSTRUCTION