Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹34.6 L+₹1.6 L (4.93%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L2 | Rejected-AOC Not Accepted | |
| 3 | L3₹41.7 L+₹8.8 L (26.7%)Rejected-AOC | L3 | Rejected-AOC Not Accepted |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
18 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NORTH MUMBAI
GARRISON ENGINEER NORTH MUMBAI
CERTAIN REPAIRS TO MD OTM ACCN AT MALAD COMPLEX UNDER GE NORTH MUMBAI
2022_MES_539340_1
8993/E8
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NORTH MUMBAI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER NORTH MUMBAI
₹90,000
Yes
20 Sept 2022
19 Jul 2022
20 Aug 2022
19 Jul 2022
18 Aug 2022
4 Aug 2022
20 Jul 2022 - 3 Aug 2022
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish outside MD Land complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for rendering 10mm thick on ceiling surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundplast PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.
Material and labour for rendering 15mm thick on internal wall surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundplast PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix' of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing including scaffolding at any height and all safety materials required for execute work etc complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work with sub class "B" bricks straight or curved on plan exceeding 6 mtr mean radius with old size bricks and built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge
Material and labour for 75mm thick PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection including finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats or frame with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames) including all fittings complete all as specified and as directed by Engineer-in-Charge
Taking down chowkats or frame with shutters exceeding 1.50 but not exceeding 4.0 sqm each (without taking off shutters from the frames) including all fittings complete all as specified and as directed by Engineer-in-Charge
Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make: M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two number of panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix M S ordinary rat tail rod pattern springs of size 300 mm, including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux
Material and labour for preparing old wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimer paints/ Dulux
Supply and fix mild steel hold fast confirming to Fe 410-S or Fe 310-S complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete 1:3:6, type C1 using 20mm graded stone aggregate as in fixing hold fasts, bed blocks, coping, filling inside of pressed steel frame etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix in repair extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Material and labour for machine cut, machine polished, green marble slab 18 to 20mm thick as in jambs and cills of windows etc as in frame work for aluminium sections, set, bedded and jointed with grey cement slurry mixed with admixture of pigment to match the shade of marble slab laid over and including screed bed or bedding layer of 10mm thick in cement mortar 1:4 all as specified and as directed.
Material and labour for aluminium sections powder coated (minimum thickness of powder coating 50 microns) for doors / windows / ventilators / partitions etc and necessary joining cleats, glazing clips, rubber packing anodized aluminium snap beading, screws, anodized aluminium fittings etc complete of standard sections all as specified and as directed. Make Aluminium section shall be of Jindal / Hindalco / Indalco Note : Weight of aluminium sections for frames and shutters shall only be considered for measurement for payment. However, cost of other consumables given in the items shall be deemed to be included in the rate quoted. Glass panels prelaminated particle board and aluminium wire mesh as applicable will be measured and paid separately as supplied only.
Supply and fix 4.8mm thick sheet glass, ordinary quality and glazing with rubber packing around the glass or F section, in squares not exceeding 0.50 sqm in each pane including taking down existing complete all as specified and as directed. Make : Hindustan Pilkington Glass works / Saint Gobin / Modi Float / Modiguard
Supply and fix 4.8mm thick sheet figured glass, pin head type and glazing with rubber packing around the glass or F section, in squares not exceeding 0.50 sqm in each pane including taking down existing complete all as specified and as directed. Make : Hindustan Pilkington Glass works / Saint Gobin / Modi Float / Modiguard
Supply and fix 15 micron coloured aluminium anodised grill of design No DG-202, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group or equivalent make as approved by GE
Supply and fix anodised aluminium grill, square/rectangular or similar section, fixed with channel of size 38mm x 12mm x 1.3mm "DECO GRILL of Dg -101" of size7 x 4.5mm thick complete all as specified and as directed.
Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 178 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 174 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’
Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET
Material and labour for providing stages wise waterproofing treatment to sunken portion of toilets as under. Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete all as specified and directed. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions. Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fibber glass cloth over the 1st coat while the coated surface is still tacky Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions Note : The unit quoted rate shall deemed to be included for cost of waterproofing compound.
Material and labour for Plain cement concrete 1:5:10 nominal mix type E2 using 40mm graded stone aggregate as in lean concrete etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs vitreous China wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm), including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson
Supply and fix in repair vitreous China squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) & provision of Plain cement concrete 1:5:10 nominal mix type E2 using 40mm stone aggregate all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson
Material and labour WC connector 110mm PVC SWR for WC complete all as specified and directed.
Supply only PVC connector 15mm size with PTMT nuts of length 450mm all as specified and as directed.
Supply and fix in repairs, 10 litre capacity, PVC flushing cistern, white, symphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe 32mm dia, CI brackets etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Hindustan Sanitary Ware / Parryware / Commander / CERA / M/s Johnson Peddar
Material and labour in repairs Stainless steel grating removable & fixable type for floor trap including jointing with solvent cement 100mm dia of outlet complete all as specified and directed.
Material and labour in repairs Stainless steel grating removable & fixable type for floor trap including jointing with solvent cement 75mm dia of outlet complete all as specified and directed.
Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant
Supply and fix in repairs vitreous china wash hand basin white flat back size 630 x 450 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand including 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed. Make : M/s Hindustan Sanitary Ware / Parryware / Neyveli Ceramics (Neycer) / CERA / Hindware
Supply and fix in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with long screwed shanks and fly nuts, screwed for 15mm iron pipe all as specified and as directed. Make : Soma/Leader/Zoloto/Jaquar (Essco)/Prayag
Supply and fix in repairs concealed type stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Soma/Leader/Zoloto/Jaquar (Essco)/Prayag
Supply and fix 32mm bore low density polyethylene pipes(LDPE) of pressure rating 6 kg/ cm2 complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix 32mm bore high density polyethylene pipes(HDPE) of pressure rating 6 kg/ cm2 complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. Make :Soma / Leader / Zoloto / Jaquar (Essco)/Prayag
Supply and fix in repairs brass chromium plated towel rail, 20mm dia, D type, 60cm long, between flanges complete all as specified and as directed by Engineer-in-Charge. Make : Crown / Jindal / Essess / Swastik
Supply and fix soap dish Soap dish, stainless steel, approximate size 160 x 160 x 90mm fixed to plugs with chromium plated brass screws all as specified and as directed.
Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.
Supply and fix in repairs overhead shower rose brass chromium plated 125 mm dia, heavy duty pattern with swivel joints, suitable for jointing to 15 mm bore steel water tubing or union complete all as specified and as directed by Engineer-in-Charge. Make :Soma / Leader / Zoloto / Jaquar
Supply and fix in repairs GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing to walls including cutting chases in brick walls pinning in and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make: Tata / Jindal / Zenith / Swastik / Prakash
Supply and fix in repairs GI tubing, medium grade, 20 mm bore with all fittings and connections and fixing to walls including cutting chases in brick walls pinning in and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make: Tata / Jindal / Zenith / Swastik / Prakash
Supply and fix in repairs GI tubing, medium grade, 25 mm bore with all fittings and connections and fixing to walls including cutting chases in brick walls pinning in and making good disturbed surfaces using with cement mortar 1:3 all as specified and directed. Make: Tata / Jindal / Zenith / Swastik / Prakash
Supply and fix rotational moulded polyethylene water storage tanks 1000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Supply and fix rotational moulded polyethylene water storage tanks 2000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Material and labour for Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and us directed
Supply and fix in repairs 40mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe Supply and fixed etc complete all as specified and as directed by Engineer-in-Charge Make: Kirloskar / Zoloto / Kartar / Upadhaya / Leader / BIR
Supply and fix in repairs 50mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipeSupply and fixed etc complete all as specified and as directed by Engineer-in-Charge Make: Kirloskar / Zoloto / Kartar / Upadhaya / Leader / BIR
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in Cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles
Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles
Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Kajaria / Somany Tiles Ltd / Nitco tiles / RAK tiles
All as per item No.67 but in skirting/dado including 10mm thick Cement Mortar 1:4 rendering of backing layer complete all as specified and as directed by Engineer-in-Charge.
Material and labour 18 to 20 mm thick machine cut, grinded and polished, mushroom granite stone slab, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match including 15mm thick screed bed in cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for machine cut Kota stone slab flooring 20-25 mm thick over and including cement screed bed 20 mm in Cement Mortar (1:4) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
All as per item No. 70 described her-in-before but 15mm thick kota stone as in riser of steps, skirting, dados etc over a backing coat plaster 10mm thick in Cement Mortar 1:3 complete all as specified and as directed by Engineer-in-Charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 25mm dia stainless steel curtain rail fixing with including provision of pair of brackets, stops, rollers etc complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Material and labour for complete removal of existing wall surfaces including washing/rubbing down with water and applying two coats of oil bound distemper over a coat of wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Material and labour for applying 1.5mm thick wall care putty over surfaces complete all as specified and directed by Engineer-in-Charge. Make : Birla cement/JK white/ Golden Mohar
Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Material and labour for complete removal of existing ceiling surfaces including washing/rubbing down with water and applying two coats of oil bound distemper over a coat of wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Taking down AC rain water pipe any size or pattern including all fittings heads, shoes, bends. Swan necks, etc complete all as specified and as directed.
Supply and fix UPVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix UPVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Material and labour for chipping, removing, carefully concrete including loose plaster by low impact hammer without damaging the structure and cleaning and disposal of debris out side the premises including necessary form work ie providing & erecting steel props, safety nets, dust control net, self supported two legged B class tubular steel scaffolding , 4mm thick ply covering to machineries / other utilities etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cleaning the existing reinforcement with wire / rotary wire brush, making the surfaces free from loose material dirt etc, complete and applying two coats of alkaline rust converting primer conforming to ASTM-B- 117 on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coats etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing and fixing additional steel bar in various structural elements like column, beams and slab etc including drilling, bending and fixing the bars tying with preleft binding wires etc complete anchoring reinforcement bar in existing RCC member in holes of minimum 10 dia depth for 8 to 12mm dia bars etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for carrying out application of 'Bi-polar migratory corrosion inhibitor EPCO-KP-100 on concrete surface and inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attach anode as well as cathode, which is purely alkaline in nature (PH-9.5), so it has no carcinogen activity with concrete etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for applying two coat of Anticorrosive Treatment to reinforcement with using IPNET RB on exposed reinforcement with time interval of minimum 4 hours between each coat and the application shall be by brush etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing and applying structural grade epoxy-latex bond coat prior to application of any type of mortar conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application complete all as specified and as directed by Engineer-in-Charge.
Repairing of excessively damaged concrete portion by using superfluid dual shrinkage compacted and providing, casting with micro concrete of grade M-40 at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing and formwork of steel or marine ply complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .
Material and labour for building up the profile of structural members by using polymer modified mortar upto 20mm thickness including levelling profilling etc complete all as specified and as directed. Make: Molith PMM of Krishna conchem or equivalent. Note : Mode of measurement : Superficial area of concrete will be measured. Note for Item No.82 to 89:- (i) The work under Item No. 82 to 89 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.
Supply and fix mild steel TMT bars 10mm dia and over, cut to length bent to shape required cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by Engineer-in-Charge.
Demolition of the existing brick coba/concrete treatment over roof slab completely including throughly cleaning etc complete all as specified and Removal of the demolished material to outside MD land.
Material and labour for Plain cement concrete 1:2:4,type B0 using 12.5 mm graded aggregate mixed with water proofing compound @ 2% by weight of cement or as per manufacturer's instructions as in levelling course, haunching and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and as directed.
Material and labour APP modified membrane roof treatment to roof and parapet surface to the following specification:- (a) Applying oil bound bitumen primer @0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit of 25 0 C after preparation of surface. (b) Supply and lay APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10cm and 15cm end lap weighing not less than 3.6 kg/sqm. (c) Applying one coat of solar reflective bituminous paint all as per manufactures's instruction complete all as specified and as directed.
Material and labour for providing stages wise waterproofing treatment to sunken portion of toilets as under and as directed by Engineer-in-Charge. Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete all as specified and directed. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions. Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fyber glass cloth over the 1st coat while the coated surface is still tacky Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed all as specified and as directed.
Material and labour for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and as directed.
Material and labour for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring / hard standing / path, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and sealing the ends using PCC 1:2:4, type B1 including 25mm sand cushioning complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur
Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole into brick wall / concrete surfaces (for removing the roots of trees/plants) area not exceeding 0.50sqm each and using acid to burn the all roots of tree/plants and making good disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and including making good adjoining surface with existing finishes all as specified and as directed by Engineer-in-Charge. Note: The unit quoted rate shall be deemed to include WPC & necessary scaffolding as required.
Supply and fix 18mm thick prelaminated PVC Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works all as specified and as directed. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.
Supply and fix 18mm thick PVC plain celuka Ply of any color fix with screw all works all as specified and as directed by Engineer-in-Charge. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.
Supply and fix 12mm thick PVC plain celuka Ply of any color fix with screw all works all as specified and as directed by Engineer-in-Charge. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.
Supply and fix 05 mm thick PVC plain celuka Ply of any color fix with screw all works all as specified and as directed by Engineer-in-Charge. Make Rajashri plastiwood, Sintex or equivalent aproved by GE.
Supply and fix kitchen basket stainless steel set of 6 Nos basket made out of not less than 3mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty) of size 300mm x450mm long for each basket roller of size 45mm x 25mm and magnetic and connected plate in shutters complete each set shall comprising of following basket. a) Cup & saucer basket - 430 x 508x 100mm -01 No b) Cutlery basket 430 x 508x 100mm -01 No c) Partition basket 430 x 508x 150mm -01 No d) Plain basket 430 x 508x 100mm -01 No e) Plain basket 430 x 508x 250mm -01 No f) Dish (plate) basket 430 x 508x 250mm -01 No
Supply and fix brass handle fabricated type polished of size 100mm all as specified and as directed by Engineer-in-Charge.
Supply and fix stainless steel kitchen plate rack made out 1mm thick of size 600mmx900mmx200mm and 6 plate complete all as specified and as directed by Engineer-in -charge.
Supply and fix Stainless steel butt hinges medium weight of size 75mm all as specified and as directed by Engineer-in-Charge.
Supply and fix brass handle fabricated type polished of size 75mm all as specified and as directed by Engineer-in-Charge.
Supply and fix Ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair, Wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges all as specified and as directed by Engineer-in-Charge. Make : Jaguar catlogue No. FLR-CHR-5273UPR or equivalent
Supply and fix in repair, Jet spray (Butterfly) with 1Mtr tube Cat No-BEA-17 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair, health faucet (body cleaner) with 1.0m tube and hook (PVC tube), white/Ivory Cat No- BEA-84 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair, corner glass shelf 300mm Cat No- BEA-44 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair, glass shelf 300mm (with ABS Brackets) Cat No- BEA-49 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair Peg set 6 Cat No- BEA-30 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair, CP brass towel Rack Cat No- BA-52 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair, CP brass soap Dish Cat No- BA-15 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Supply and fix in repair, CP brass towel Ring Cat No- BA-21 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE
Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling and finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar
Supply and fix PVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex
Supply and fix PVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex
Supply and fix PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge
Supply and fix UPVC (SWR) branch piece, double (double Y) equal or unequal of any radius 110mm bore with access door etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix UPVC (SWR) branch piece, single (single Y) equal or unequal of any radius 75mm bore with access door etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix UPVC (SWR) junction single 75mm bore (Single T) equal or unequal all as specified and as directed. Make : Prince / Finolex / Supreme
Supply and fix UPVC (SWR) junction single 110mm bore (Single T) equal or unequal all as specified and as directed. Make : Prince / Finolex / Supreme
Supply and fix in repair Swivel Shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs CI nahani trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1: 2: 4 type B1, Complete all as specified and as directed by Engineer-in-Charge
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete reinforced in roof, floors (other than ground floors), beams, staircase landing, chajjas and similar suspended work of any description and on any position complete all as specified and as directed by Engineer-in-Charge.
Material and labour for reinforced cement concrete nominal mix 1:2:4 (using 20mm graded stone aggregate) type B-1 as in slab, shelves etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mild Steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
Supply and fix framed work such as grills, gratings, barred iron doors, ladders, brackets of chajjas etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 all as specified and as per directed by Engineer-in-Charge.
Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints Ltd - Apcolite/Goodlass Nerolac (Nerolac)/ Berger Paints Ltd - Luxol/Shalimar Paints - Superlac/Jenson Nicholson - Brolac
Material and labour for preparing old steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints Ltd - Apcolite/Goodlass Nerolac (Nerolac)/ Berger Paints Ltd - Luxol/Shalimar Paints - Superlac/Jenson Nicholson - Brolac
Vishal Builders
KAJAL CONST.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .