SPECIAL REPAIRS OF BLDG No E-72, E-73 AND E-75 (ADM BLOCK) OF SHO (L) GOLCONDA UNDER GE GOLCONDA

Dismantling Single layer Mangalore pattern or similar tiles in roof covering complete all as specified and directed by Engr-in-Charge.

Dismantling timber scatling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engr-in-Charge.

Dismantling timber scatling 40 Sqcm and over in section, in any position complete all as specified and directed

S & F for framed, trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-B,etc complete all as specified and directed by Engr-in-Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (Mangalore pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc completed all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L Weather boarding of 2nd class H.W of 20mm to 25mm thick and rebated of thick edge to give 20mm lap and fixed with screws/nails including one coat primer and two coat synthetic enamel paint complete all as specified and directed.

M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/ blankets any thickness, incl cover filltets and grids and S&F true horizontal level 600x600mm panels false ceiling system using hot dipped galvanized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished tagular edge including 8-9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination complete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness in floors, approns laid , bedded and pointed any mortar complete all as specified and directed.

M & L for 20-25 mm thick, Machine cut kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed.

M & L Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:4 screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified.

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms, Wall cading ,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and as directed.

M&L chequred cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed : set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in CM 1:6. Make : Ultra or Classic

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , laid over and including 10mm thick rendering in cement mortar(1:3) as backing coat, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and directed.

M&L Vitrified light shade ceramic tiles 10 mm thick (square/ rectanglar ) polished, area of each tile not exceding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and directed.

M&L Vitrified light shade ceramic tiles 10 mm thick (square/ rectanglar ) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and directed.

Demolition of PCC in ground floor or paving of any description n.exc. 15cm thickness (Un re-inforced) below or above GL complete all as specified and directed by Engr-in-Charge.

M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc.,all as specified and directed by Engr-in-Charge.

Demolition of Brickwork masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engr-in-Charge.

M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

Taking down cement plaster on brick wall/stone wall, ceilings, sunken floors etc, racking out joints, hacking for key & scrubbing with water completely complete as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surface fair and even and smooth complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in CM 1:4 with WPC on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement. (NOTE : - WPC will be measured and paid separately)

Supply only Integral Liquid Water Proofing Compound all as specified and as directed.

M&L for providing and applying plaster of paris putty over newly plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment and applying two coats of weather proof exterior grade paint on prepared surfaces of walls complete all as specified and directed.

M & L for complete removal of existing treatment and applying 1.5mm thick birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared surfaces of internal walls complete all as specified and directed.

Taking down,Chowkhats or frames not exc. 1.5 sq. m each,etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters ( without taking of shutter) from frame area exc 1.5 but n.exc 4 Sqm each complete

Taking down and refixing aluminium shutters exc 1 sq. m and n exc 2 sq. m each with resecuring, or easing & adjusting complete all as specified and directed

S & F for powder coated (Thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators/ grills with one or more rebates including joining cleat for fixing, etc complete, as specified and directed.

M & L for Powder coated (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters,hanging type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,handles,stoppers etc. complete all as specified and directed.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

M&L for 4 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, etc completed all as specified.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed, complete all as specified and directed.

M&L for 4 mm thick,Figured glass, pin head type and glazing with oil putty in square n exc 0.5 sq. m in each pane, etc completed all as specified.

S&F in repair Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Fe 410-W (Gde-E-250) quality-B etc and fixing, complete all as specified and directed.

S&F 2nd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treatedtc complete all as specified and directed by Engr-in-Charge.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members for windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc, complete all as specified.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable both side Prelam PVC sheet Stile and rails feathered at edges beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and directed by Engr-in-Charge

S&F 125 mm size Butt hinges medium weight cold rolled mild steel and fixed in complete all as specified and directed by Engr-in-Charge.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed by Engr-in-Charge.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed by Engr-in-Charge.

M & L in repair for 18 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work for cub board,kitchen cub board and selves and other uses etc completed all as specified.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps (when open) in 40mm complete all as specified and directed.

M&L for painting wood and wood based new surfaces of any description, not otherwise described over 10cm width or girth, one priming coat of pink primer on preparation new surface and two coats of synthetic enamel paint on pink primer surfaces all as specified and directed by Engr-in-Charge.

M&L for complete removal and preparation of old painting wood and wood based new surfaces of any description, not otherwise described over 10cm width or girth, one priming coat of pink primer on preparation new surface and two coats of synthetic enamel paint overa coat of pink primer surfaces all as specified and directed by Engr-in-Charge.

M & L preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L 20 mm dia CPVC pipe with all fitting fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and directed.

M&L 25 mm dia CPVC pipe with all fitting fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line complete all as specified and directed.

S & F in repairs Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified and directed.

S&F in reapirs White glazed fine clay sink 750x450x250mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, complete all as specified and as directed

S&F in reapirs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs plastic water closet seat , black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.

S&F Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed complete all as specified and directed by Engr-in-Charge.

S&F 32mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid for wash hand basin waste pipe complete all as specified and directed by Engr-in-Charge.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge.

S&F in rapairs 15 mm bore two way Bib taps chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and directed.

S & F in repairs of ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15 mm bore stop valve chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and directed.

Dismantling PVC water tanks of capacity 1000 ltr and removing to store

S&F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top )of 1000ltr capecity hoisted and fixed in position all as specified .

Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required complete as specified and directed.

PVC(SWR) 75 mm bore pipe single socketed,in any length with rubber ring joints,laid or fixed in any position complete all as specified and directed.

S&F in repair PVC (SWR) bends any radious 75 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends any radious 75 mm dia with access door complete all as specified and directed.

S&F in repairs PVC (SWR) Vent cowl 110mm dia complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified.

M & L treating the soil along with the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., etc complete all as specified and directed.

Taking out carefully copper/aluminium point wiring,Light,fan, bell,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs, refixing of fans etc including making good the disturbed surface of wall/floors complete all as specified and directed.

Taking down existing sub main wiring of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc.

M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. one light controlled by one switch.

All as per Sl item No.82 but for one bell controlled by one switch, complete all as specified & directed at site.

All as per Sl item No.82 but for one ceiling fan controlled by one switch & regulator, complete all as specified & directed at site.

All as per Sl item No.82 but for one exhaust fan controlled by one switch, complete all as specified & directed at site.

All as per Sl item No.82 but for one 3 pin socket 6 Amp on independent board, complete all as specified & directed at site.

All as per Sl item No.82 but for one 3 pin socket 6 Amp on same board.

All as per Sl item No.82 but for but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLS) insulated unsheathed single core multi standed copper conductor all as specified and directed.

Supply and fix Modular switch, single pole, one way, 6 Amps one module complete all as specified and directed.

Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and directed.

Supply and fix Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

Supply and fix Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete, all as specified and directed.

Supply and fix lamp holder insulated body with back plate complete all as specified and directed.

Supply and fix modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.

Supply and fix modular bell push 6 Amps 1 module complete all as specified and as directed.

Supply and fix Bell electronic 230 volt, AC single pole complete all as specified and directed.

Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver complete with all fixing arrangement including connection with twin twisted unsheathed PVC copper cable of suitable size etc, complete all as specified and as directed. Makes : Havells of cat No. STOUT MINI 1200BS20WLED865SPCWH or Philips/ Wipro

Supply and fix 10W,decorative, wall mounted, ultra slim, aluminim housing LED lighting fixture size (550x 23x37)mm, high lumen output, environmental friendly, energy efficient with electronic driver complete with all fixing arrangement including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed. Makes : Havells of cat No. LUMILINEPLUSNEOBS10WLED865CSSINDS or Philips/ Wipro

Supply and fixing LED BLDG Security Light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and directed. Makes: Havells Cat No. ENDURASUNDOWNSL35WLED765PASYBOPC or Philips/ Wipro

S&F in repair Factory made SPN 8 ways distribution board in sheet steel enclosure double door with suitable rated bus bar, 240 Volts suitable for housing RCBO SPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

All as per Item No.101 but double door 12 ways DB, complete all as specified and directed.

S&F in repair Factory made Prewired TPN 4 ways distribution board in sheet steel enclosure vertical double door with suitable rated bus bar, 415 Volts suitable for housing TPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

S&F in repair 240V, 10 KA 'C' curve MCB of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site.

Supply and fix RCBOs SPN 32 Amp, 240 volts 50Hz AC supply, in the MCB DB Complete with connection testing and commissioning complete all specified and directed.

S&F in repair MCB, Four pole, 240 volts, 63 Amps 10 KA C curve in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade, protection pipe for GI earth lead complete all as specified and directed by the Engr-in-charge.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades,shelves, lintels,etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.

S&F in repair single pole and neutral enclosure with a two pin and earth AC plug and socket complete with one single pole 20 Amps MCB complete all as specifed and directed at site.

Supply & fix in repair LED down lighter 2'x2' , 36 W environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed. Makes : Havells Cat No. PLANO2X2PLR36WLED857SG2 or Philips/ Wipro