Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.8 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹22.4 L+₹17,825 (0.80%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹22.8 L+₹58,055 (2.61%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹26.6 L+₹4.3 L (19.5%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹33.8 L+₹11.6 L (52.2%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
4 Oct 2024, 6:00 pmClosed
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
PERIODICAL SERVICES INCLUDING PLASTERING, PLUMBING AND SANITARY FITTINGS AND MISC B/R WORKS TO OTM/MD ACCN OF AT TB-I, SPORTS COY, CIW AND HRDC AT BEG AND CENTRE KHADKI UNDER AGE B/R-II IN GE (CENTRAL) KHADKI.
2024_MES_671237_1
8978/E8 OF 2024-2025
Open Tender
Civil Works
Item Rate
270 days
BEG AND CENTRE area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹88,000
Yes
12 Nov 2024
3 Sept 2024
7 Oct 2024
3 Sept 2024
4 Oct 2024
20 Sept 2024
3 Sept 2024 - 12 Sept 2024
Amount
NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (d) Safety head gear, gloves, apron, shoes and safety glasses should be wear while carrying out the painting works. (e) The scafolding shall be having ease of access for inspection purpose.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the the premises complete all as specified and as directed.
Material and labour Glazed coloured ceramic tiles as in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed by Engr-in-Charge.
Material and labour Non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc . 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
Material and labour 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.
Material and labour 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.
Material and labour 75mm bore PVC(SWR) pipe, type 'B' double socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.
Material and labour 110mm bore PVC(SWR) pipe, type 'B' double socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.
Material and labour PVC (SWR) bends type 'B' of any radius, 75 mm dia complete all as specified and directed.
Material and labour PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.
Material and labour 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.
Material and labour 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.
Material and labour PVC (SWR) vent cowl of bore 75 mm dia, including taking down old PVC vent cowl all as specified and as directed.
Material and labour PVC (SWR) vent cowl of bore110 mm dia, including taking down old PVC vent cowl all as specified and as directed.
Material and labour PVC (SWR) 'P’ or 'S' trap, type 'B' 125/110 mm dia complete all as specified and as directed.
Material and labour Cast iron sanitary connection socket to fit WC out-let of any size and shape fixed in repairs complete all as specified and as directed.
Material and labour 110mm bore PVC (SWR) WC connector type 'B' any type fixed in repairs complete all as specified and as directed.
Material and labour PVC (SWR) multi floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.
Material and labour PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.
Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying two coat of oil bound distemper complete all as specified and directed
Material and labour Preparation of old plasterd or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed.
Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of oil bound distemper complete all as specified and directed
Material and labour Preparation of old plasterd or unplastered surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.
Material and labour for preparing plastered or unplastered old surfaces of wall including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spot and applying one coat of dry distemper (any tint) on walls complete all as specified and directed
Material and labour Preparing old plastered or unplastered surfaces of walls including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts, trading oil, greasy spot and applying one coat of white wash on walls complete all as specified and as directed.
Description all as per Sl Item No. 25 above but applying one coat of white (Lime) wash on ceiling.
Material and labour dampstop advanced (Berger/Birla/Asian paints or equivalent) of 3mm thick on wall surface by using "roller" after smoothening the surfaces using sand paper etc. complete all as specified and as directed. NOTE :- (i) Cracks of wall to be filled with its crack fill paste of make as specified above. (ii) Damp proof should be done by skilled labour and as per manufacturer's instructions.
Material and labour Wall care putty of 3 mm thick as in interior / exterior on wall / ceiling surfaces of any description finished smooth and even surfces complete all as specified and as directed.
Material and labour Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour Preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour 100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) fixed in repairs complete all as specified and as directed.
Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.
Supply and fix vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per makes specified in PS fixed as in repairs, complete all as specified and as directed.
Supply and fix Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom,and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and directed.
Supply and fix in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.
Material and labour Vitreous china wash basin white flat back size 550x400 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per makes specified in PS complete fixed in repairs all as specified and directed.
Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed.
Material and labour for Granite slab 20 mm thick machine cut bedded and jointed with colour cement to match, cut to shape required all as specified and directed.
Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including Material and labour for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Description all as per ser No 39 but for steps, risers, skirting over and including 10mm thick rendering in CM (1:4) back coat complete all as specified and directed.
Supply and fix in repair for Vitreous China bowl urinal flate back size 330x250x445 mm wall mounted (minimum), (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing fixed in repairs all as per PS complete all as specified and as directed by Engr-in-charge.
Supply and fix in repair CP Waste coupling for vitreous china bowl urinal flate back complete all as specified and as directed.
Material and labour urinal spreader of PTMT any colour, 15 mm dia. (Minimum weight 60gms) fixed in repairs complete all as specified and directed.
Supply and fix in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.
Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to waste pipe upto 0.5sqm each overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed.
Supply and fix sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Taking up or down steel tubing 15mm dia and connections including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down steel tubing 20mm dia and connections including cleaning for refixing or removal to store complete all as specified and as directed.
Material and labour 15mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as directed.
Material and labour 20mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as directed.
Taking up or down steel tubing 40mm dia and connections including cleaning for refixing or removal to store complete all as specified and as directed.
Material and labour 40mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as specified and as directed.
Refixing 40 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as directed.
Disconnecting existing tanks upto 2000 litre capacity, including removal of settled sludge, setting aside (or lowering if required) for repairs, cleaning by chemical cleaning etc and hoisting if required, reconnecting and refixing in position as in same position including refixing/repair of covers & float valve complete all as specified and as directed.
Material and labour brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as per makes specified in PS fixed in repairs complete all as specified and as directed.
Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete all as specified and as directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level complete all as specified and as directed.
Material and labour 75mm thick PCC 1:3:6 type C2 ( using 40mm graded aggregate) as in plinth protection including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply and fixed in repairs, 20mm dia ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
Supply and fixed in repair 15mm dia ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
Supply and fixed in repairs, 25mm dia ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.
Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix Bib taps standard of PTMT, any colour screwed for iron pipe suitable for 15mm dia all as per in PS fixed in repairs complete all as specified and as directed.
Supply and fix Stop valve fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix in repair for CP Health Faucet ABS Body with 1 meter flexible tube & Hook complete all as specified and directed.
Supply and fix in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide (wall) with chromium plated bracket guard and with CP railing 60 cm long complete all as directed by engr in charge.
Supply and fix 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix in repairs fancy type Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.
PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs all as directed.
PVC connections 15 mm size with PTMT nut of length 600 mm fixed in repairs all as directed.
PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 610 mm long fixed in repairs complete all as specified and as directed.
Supply and fix PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per makes specified in PS complete all as specified and as directed.
Material and labour in repair Stainless steel plate rack of size 900 x 700mm, including provision for storage of plates and boxes fixed to wall complete all as specified and as directed.
Demolition of precast concrete block walling built in cement mortar including PCC coping / ashlar facings, dressed stonework, precast concrete articles etc complete all as specified.
Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed.
Material and labour for Precast cement concrete block masonry using PCC type C1 1:3:6 (20 mm graded aggregate) solid blocks, exc. 10 cm in width and setting in cement mortar1:6 complete all as specified and as directed.
Description as per item no 79 but except block
Material and labour for rendering 15 mm thick on fair faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and fair complete all as specified and as directed.
Material and labour rendering 5 mm thick in CM 1:3 on concrete surface of ceiling & finished even & smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 10 mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete all as specified and as directed.
Material and labour preparation of newly plastered surface and applying two coat of cement base paint on wall including priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed.
Material and labour preparation of newly plastered surface and applying two coat of oil bound Distemper over a coat of primer on wall etc complete all as specified and directed
Material and labour for preparation of new plastered surface of Ceiling and applying three coats of white wash including preparity to plastered surface complete all as specified and directed.
MAHESH DADAJI BACHHAV (BID ID -3116284)
S.R.M.K Enterprises (BID ID -3127963)
M/S K.D.MATE (BID ID -3117075)
L.K.R.TIWARI CONSTRUCTION (BID ID -3117103)
DARSHAN ENTERPRISES (BID ID -3116267)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .