Construction of Girls Hostel (10 plus 1) Rooms at College of Food and Dairy Technology, Koduvalli.(Phase-I)

Amount

Civil Works

Clearing the site using JCB on hire charges around the proposed building and making approach road to the site, etc. complete complying with standard specification.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring strutting the sides, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in Foundation and basement and trenches etc., with filling Sand in layers of not more than 15cm thick well rammed watered and well consolidated etc., complete complying with standard specifications.

Refilling in foundation, basement, etc with excavaed earth in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the Engineer,i/c..,

Cement Concrete 1:5:10 (One Cement, Five Sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and erecting steel shuttering including necessary supports for plain surfaces for reinforced cement concrete works such as grade beams, column footing, plinth beam, stair case steps, pedestals bed blocks cover slab etc., using mild steel B.G. 10 sheets of size 90cm X 60cm stiffened with mild steel angles of size 25mm X 25mm X 3mm for boarding laid over silver oak (Country wood) joists of size 10cm X 6.5 cm spaced at about 90cm centre to centre, supported by casurina props of 10cm to 13cm diameter spaced at 75cm centre to centre etc., complete complying with standard specification.

Supplying and erecting steel centering for sides and soffits including supports and strutting up to a height of 3.29m meter for plain surfaces such as RCC slabs, beams TEE or ELL beams, lintels staircases beams etc., with all cross bracings using mild steel B.G. 10 sheets of size 90cm X 60cm stiffened with welded mild steel angles of size 25mm X 25mm X 3mm laid over silver oak (Country wood) joists of size 10cm X 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre etc., complete complying with standard specification in all floors.

Supplying and erecting steel centering for sides and soffits including supports and strutting up to 3.29 meter height for plain surfaces such as RCC square or rectangular columns, top and bottom slabs of sunshade boxing sill slabs etc., with necessary facia etc., with all cross bracings using mild steel B.G., 10 sheets of size 90cm X 60cm stiffened with welded mild steel angles of size 25mm X 25mm X 3mm for boarding laid over silver oak (Country wood) Joists of size 10cm X 6.5 cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification.

Reinforced Cement Concrete 1:11/2:3 (One Cement, one and half Sand and three hard broken stone jelly) using machine broken 20 mm gauge hard broken granite stone jelly for all RCC item of works excluding cost of reinforcement grill, fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator, finishing, curing, etc., complete and providing fixtures like fan clamps in the RCC floor/roof slab wherever necessary and bearing surfaces of wall, beam etc. shall be finished smooth with cement mortar 1:3 (One Cement and Three Sand) 12mm thick and kraft paper laid over it without claiming extra, etc., complete complying with standard specification as directed by the departmental officers. For foundation and basement

For superstructure in Ground floor

Supplying, fabricating and placing in position of steel reinforcements using MS / RTS rods for all RCC works as per design given including cost of steel. Binding wire, straightening the rods, welding of rods, dia above 25mm in all floors complying with standard specifications. [The welding should conform to BIS. Wherever required at contractor’s expense.]

Brick work in Cement Mortar 1:5 (One cement and Five Sand) using second class chamber burnt bricks of size 9”x 4½”x 3” for the following including curing, etc., complete complying with standard specification For foundation and basement.For foundation and basement

For super structure in Ground floor

For super structure in First floor

Providing brick partition wall of 11.50 cm thick using best quality second class chamber burnt bricks of size 9” X 4 ½” X 3” in cement mortar 1:3 (One cement and three Sand) including supply and fixing hoop iron reinforcement if considered necessary by the departmental officers as directed etc., complete complying with standard specifications. (The hoop reinforcement will be measured and paid separately). For Ground Floor

Brick work in Cement Mortar 1:3 (One cement and three Sand) using second class chamber burnt bricks of size 9”x 4½”x 3” for the following including curing, etc., complete complying with standard specification. For Ground floor

Special ceiling plastering and finishing the RCC exposed surface such as RCC slabs sunshade facia, canopy slab, stair case, waist slab, landing slab etc., with cement mortar 1:3 (One cement and three sand) 10mm thick including hacking and providing necessary cement mortar nosing, beading etc., wherever necessary and as directed with cement mortar etc., complete complying with standard specification

Plastering of walls in cement mortar 1:5 (One cement and five sand) 12mm thick in all floors including provision of cement mortar bands and raised plastering for doorways wherever required and as directed without any extra claim complying with standard specification.

Supply and fixing country wood scantling (first quality Paddock wood) for door frames including labour charges for making, applying anti corrosive paint on the back sides of frame and fixing the frame in position, etc. complete complying with standard specification. (The wood have to be got approved by departmental Engineers before use on work).

Supplying and fixing flush door shutters of single leaf with skin type paneled door made up of hard wood of approved quality including fixing necessary furniture fittings such as iron oxide MS hinges of 125mm x 30mm size 3 Nos., aluminium bolt aldrop of size 250 x 16mm – 1 No. aluminium tower of size 250 x 12mm – 1 No. Aluminium tower bolt of size 200x12mm – 1 No., D type aluminium handle of size 125mm – 2 Nos. Aluminium door stopper / magnet catch 3” depth – 1 No. respectively, etc. complete complying with standard specification.

Supplying, fabricating and fixing in position UPVC windows using JP 23 (80mm X 50mm 1.3 Kg/m) and JP 111 (80mm X 50mm 1.5kg/m) UPVC profiles for the outer frame. Total breadth is being divided equally into two or more shutters by using UPVC profile JP 050 (60mm X 36mm 0.80 Kg/m) and complete with fusion welding, 12.mm thick GI reinforcement and complete the window by fitting with 4mm clear glass with UPVC glass bead JP 022.(35mm X 18mm 0.27 Kg/m) including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing and also as directed etc., complete.

Supplying and paving the floor with design mat finished anti-skid ceramic tiles of approved brand and quality of size 300 X 300 X 6mm in all floors over a base mortar using cement mortar 1:3 (One cement and three Sand) 20mm thick laid in situ true to alignment and pointed with colour cement (White cement mixed with colouring pigment) to suit the colour and shade of the ceramic tiles used neatly and fixed in position without any air gap in between the ceramic tiles etc., complete complying with standard specification and as directed by the departmental officers. (The sample colour and shade of the ceramic tiles should be got approved from the departmental officers before use on works).

Dadooing the walls with colour Glazed tiles of 30cm x 45cm, set in cement mortar 1:2 (One cement and two sand) with a base plastering of cement mortar 1:3 (One cement and three sand) of 12mm thick and pointed with colour cement at 0.40 kg/cm2 etc., complete complying with standard specifications and as directed by the Engineer,i/c.,

Paving the floor with Designed Colour Vitrified tiles of size 600 x 600 x 8mm in all floors over a base layer of Cement Mortar 1:3 (One cement and three Sand) 20mm thick and pointed with white cement mixed with colouring pigments at the rate of 0.3 Kg/sq.m including finishing neatly and curing, etc. complete, complying with standard specification and as directed by the departmental officers. (The basic cost of the tiles should not be less than Rs.80/- sq.ft.,)

Supplying and fixing MS grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification. The type design for the grills will be given by the Engineers,i/c.,

Supply and finishing in position of Solid PVC door shutters using 19 gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture fittings. The overall size of styles shall be 50mm X 30mm. The overall size of top rail, lock rail and bottom rail shall be 75mm X 30mm. The overall size of frames shall be 50mm X 45mm with suitable rebate for housing the shutter.

Supplying and fixing of double side polished Cuddapah slab 50mm thick for Room shelves of approved brand and quality in all floors laid in situ true to alignment and pointed with colour cement (White cement mixed with colouring pigment) to suit the colour and fixed in position etc., complete complying with standard specification and as directed by the departmental officers. (The Cuddapah slab should be got approved from the departmental officers before use on works).

Providing Pre – construction Anti – termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification. The work should be carried out by an approved and registered specialist pest control agency only. Tenderer to furnish the name of the proposed specialist firm. A 10 years post application guarantee against defects shall be furnished by the main Contractor. Note: Horizontal plan area at ground floor level of the building will be measured and paid.

Supply laying and jointing PVC pipe of approved quality and make of the following dia fixed on walls with necessary clamps and screws including cutting and threading wherever necessary, etc. complete complying with standard specification and as directed by Engineer-in-charge. (Above Ground Level) 25mm dia PVC pipe - 15 Kg /CM2 with ISI mark

32mm dia PVC pipe - 15 Kg /CM2 with ISI mark

63mm dia PVC pipe - 10 Kg /CM2 with ISI mark

110 mm dia PVC pipe – 6 Kg/CM2 with ISI mark

Supplying and fixing in position the following Gun metal gate / wheel valve of best quality and approved make and heavy type quality including cost of cutting, threading of the pipes and fixing of the G.I. pipe in position with white lead, spun yarn etc., complete complying with standard specifications. 25mm dia GM Gate valve (with ISI mark)

32mm dia GM Gate valve (with ISI mark)

Supplying and fixing in position by means of 75 mm long and 65 mm dia counter sunk bolt and nuts embedded in the floor with rubber or fiber washer white glazed European Water Closet white colour with 100 mm "P" trap with double flapped rigid PVC black seat and seat cover with C.P. brass hinges including supply and fixing 12.50 liters capacity PVC low level flushing tank, etc., complete with all fittings such as 15 mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40 mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15 mm brass connections, 15 mm C.P. Angle clock valve, 15 mm brass nipple (2 Nos.), 15 mm nylon connection and fixing the low level ISI marked flushing tank with T.W. plugs and screws and giving necessary connection to the PVC pipe including cost of 600 mm length of 100 mm dia PVC Pipe and painting the Brackets with 2 coats of approved paint over one coat of red oxide primer and redoing the dismantled masonry to original condition etc. complete. (The EWC and flushing tank should be got approved by the departmental Engineers before use on works)

Supplying and fixing Indian Water Closet (Oriya type) of size 580 x 440 mm of approved quality with "P" or "S" trap conforming to IS 2556 part 12 with sand cushion and forming flooring alround the closet using 40 mm broken brick jelly in lime concrete 1:2:5 (One lime, Two Sand and Five brick jelly) 100 mm thick and including giving necessary connection to PVC Soil pipes including the cost of 100 mm dia PVC pipe for a length of 600 mm by dismantling brick masonry / reinforced cement concrete roof or floor slab and making good the disturbed portion to original condition without leakage etc. complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Engineer,i/c., before use on works).

Supplying and fixing in position best quality and approved make Indian made white glazed earthenware wash hand basin of size 550 X 400mm white colour of approved brand and quality including cost of cast iron brackets / fisher bolts 15 mm dia brass CP pillar tap, 32 mm dia bottle trap 32mm dia C.P. brass waste coupling with rubber plug and chain 15 mm brass nipple 15 mm dia nylon connection, 15mm CP angle clock including fixing of wash basin in the wall in position with a pair of fisher bolts / CI brackets with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc. complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Departmental Engineers before use on works).

Supplying and fixing in position best approved quality C.P. brass soap tray of size 150 x 150 mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best quality brass chromium plated towel rail of 600mm length 20mm dia with CP brackets of same materials including fixing with necessary T.W. plugs, brass C.P. screws and dismantling masonry etc., complete with standard specifications. (The towel rail should be got approved by the Departmental officer before use on works).

Supplying and fixing in position Indian make decorative type wooden framed Mirror of approved quality and brand of size 600 x 450 mm x 5.5 mm shelf type with necessary ply wood backing, rubber buttons, brass CP screws, T.W. plugs etc. complete complying with standard specification. (The mirror should be got approved by the Departmental Officer before use on woks)

Supply laying and jointing CPVC pipe of approved quality and make of the following dia fixed on walls with necessary clamps and screws including cutting and threading wherever necessary, etc. complete complying with standard specification and as directed by Engineer-in-charge. 20mm dia CPVC pipe with ISI mark

Providing and fixing in position 100mm PVC .Multi inlet Floor traps with CP grating, joining, embedding in concrete etc. complete rate to include making of opening in floor, marble / tiles, for fixing grating. Size 150 mm x 150 mm

Supply and fixing of SWR gully trap of size 160 x 110mm single / double outlet of good quality and approved make embedding in concrete in correct position and alignment etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI / 1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the departmental Engineer,i/c., before use on work.

Supplying and fixing in position 15 mm dia C.P. long body tap (Heavy type) of approved make conforming to IS specification and quality including cost of shellac, thread, etc., complete, complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Departmental Officer before use on the works)

Supplying and fixing in position of 20mm dia GI Angle cock of best quality and approved make and heavy type quality including cost of cutting, threading of the pipes and fixing of the G.I. pipe in position with white lead, spun yarn etc., complete complying with standard specifications.

Painting new iron works such as steel doors, windows, ventilators, windows bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Engineer,i/c., before use on works).

Painting new wood work with two coats of synthetic enamel ready mixed paint of approve quality and colour over a priming coat in all floors. The rate is inclusive cost of all materials and labour including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Engineer,,i/c., before use on works).

Painting two coats of exterior emulsion paint over one coat of exterior primer using best qualityand approved colour of paint, brushes, scaffolding charges etc. complete complying with standard specification. Paint, primer and colour have to be got approved by the Engineer,i/c.,

White washing three coat using freshly burnt shell lime white in colour. Fevicol type gum should be used in the preparation of white wash solution, adequate quality of approved blue powder to be added to white wash solution for application to the walls etc., complete complying with standard specification.

Weathering course concrete using best quality broken brick jelly of size of 20mm uniform gauge in pure slaked lime (No Sand to be used) over the RCC roof slab, the proportion of brick jelly to lime being 31:12.5 by volume laid over in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden of beaters of approved pattern, keeping the surface constantly wet by sprinkling water, etc. complete as directed by the Engineer-in-charge. For Ground floor

Finishing the top .of roof with one course of MACHINE PRESSED TILES of size 230mmx230mmx20mm of approved quality laid in cement mortar 1:3 (one cement and three Sand) 12mm thick mixed with water proofing compound conforming and the top pointed with the same water proofing compound and red oxide, etc., Complete complying with standard specifications and as directed.

Supplying and fixing in position best approved ISI quality PVC Rain water down fall pipes of 110mm dia meter having working pressure of 4Kg/Cm2 including cost of PVC pipe, with necessary shoes, bends, nails, teakwood plugs, screws etc., and fixing of cost iron gratings of required dia meter and special clamps at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The size of teakwood plugs to be used shall be 150mm X 25mm in front and 200mm X 75mm in rear and all other sides to a depth of 100mm. The PVC pipe shall be fixed with teak wood plugs by means of “U” clamps using brass screws. Special types of “U” clamp at the centre of the pipeline shall be fixed in addition to those for more than 3 meter pipe length complying with standard specifications.

Supplying of MS hold fasts of size 230x50x6mm MS flats suitably folded to the rejoined ‘Z’ shape to have two end flabs 50mm long and over all length of the horizontal position as 230mm and including painting making necessary groove in the two end flats to accommodate screws etc complete.

Supply and fixing in position steel balustrade using 20mm size square bars at 15cm centre to centre and two balusters in single step centrally located and top shall be welded to 40mm X 6mm mild steel flat fix the handrail 40mm dia M.S. pipe as properly welded with steel flat and bottom fixed in the step concrete fixing M.S. flats of size 50mm X 6mm to be provided at the centre of the balustrade connecting all the square bars to the entire length of the balustrade and the square bars well anchord in the floor / step concrete through fish tail splay at bottom including painting the steel member of the balustrade with one coat of red oxide primer etc., complete complying with standard specifications.

Providing inspection chambers of various size using 9” thick brick walls using second sort table moulded chamber burnt bricks of sizes 9”x 4½”x3” in Cement Mortar 1:3 (One cement and three Sand) and plastering inside with cement mortar 1:3, 12mm thick and outside surfaces in C.M. 1:5 (One cement and five Sand) 12mm thick. A precast cover slab of 75mm thick shall be provided for the chamber. The rate includes necessary earth work excavation to the required depth, Plain Cement Concrete 1:5:10 (One cement five Sand and ten aggregate) 75mm thick etc., complete with standard specification and as directed by the Engineer,i/c., 60 x 60 x 90 cm (Inner dimension)

60 x 60 x 45 cm (Inner dimension)

Supplying and erecting RCC well rings of size 0.90m dia and 50mm thick 30cm height including pre-casting, reinforcement, sinking of well, transportation, sinking of well, transportation charges etc. complete with standard specification and as directed by the Engineer,i/c.,

Supplying and filling 40mm broken brick jelly for septic tank dispersion trench filling including laying, spreading etc., completed with standard specification and as directed by the Engineer,i/c.,

Supplying and erecting of 2000 litre capacity PVC water tank to ISI standard of approved quality and make including labour charges for fixing etc. complete.

Supplying and Fixing in position of CP Shower Rose and arm with stopcock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc. complete complying with standard specification and as directed by the departmental Engineers. (The shower rose and arm should be got approved by the Engineer,i/c., before use on work)

Supplying and fixing in position 15 mm dia C.P. Short body tap (Heavy type) of approved make conforming to IS specification and quality including cost of shellac, thread, etc., complete, complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Departmental Officer before use on the works)

Supplying and fixing of 15mm CP two way tap of good quality and approved make in correct position etc., complete with standard specifications and as directed by the Engineer,i/c.,

Supplying and fixing in position of ½” dia 2 in 1 / C.P. wall mixer unit of approved make and quality (Jaguar / equivalent) including cost of cutting threading of pipes and fixing the GI pipe in position with white led, spun yarn etc., complete complying with standard specifications. (The C.P. wall mixer unit to be used on work should be got approved by the Engineer,i/c., before use on work)

NARAYAN S

Bidder Name

NARAYAN S

ITA Builders