CONSTRUCTION OF EXCISE OFFICE BUILDING AT EXCISE HEAD QUARTER COMPLEX, LAMPHELPAT, IMPHAL WEST, MANIPUR.

Amount

FOUNDATION

Driven cast-in-place vertical RCC piles i/c reinforcement complete as per drawing and technical specifications.

a)450 mm diameter piles (M20 grade)

Cement concrete for reinforced in pile cap i/c form work complete as per drawing and technical specifications.(d) M25 grade

EARTH WORK

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

DAMP PROOF COURSE

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Extra for providing and mixing water proofing materials in cement concrete work in the proportion cement recommended by manufacturers.

Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per sqn on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

REINFORCED CONCRETE WORK

Reinforced cement concrete work in beam,suspended floors, roofs (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls including attached pilasters, buttresses plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts upto floor five level exclunding cost of centering, shuttering, finishing and reinforcement t (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete (3.12.2) Thermo-Mechanically treated bars

FORM WORK

(g) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(b) Flat surface such as suspended floor, roofs landings and the like

(h) sides and soffits of beams, beam haunching, cantilevers, girders, bressumers and lintels exceeding 1m in depth.

BRICK WORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand)

Half brick masonry 2nd class (local 1st class ) in cement mortar 1:3 (1 cement : 3 coarse sand ) in superstructure .

WOOD WORK

Providing wood works in frames of doors,windows, clerestory windows and other frames, wrought framed and fixed in position

a) Local best quality Uningthou

P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws.

7.6.1 Local best quality Teak wood

P/F flush door shutters commercial type core of block board construction with frame of 1st class hard wood and well matched commercial ply veneers 3mm thick on both faces of shutters i/c providing brass butt hinges with necessary screws etc. complete as directed and specified. 7.12.1: 40mm thick

Providing & fixing Brass handles with necessary screws etc. complete. 7.29.1: 125mm

Providing & fixing Brass Tower bolts(barrel type) with necessary screws etc. complete. 7.89.1: 250 x 10 mm.

Providing & fixing bright finished steel 100 mm door mortice latch & lock & a pair of levers handles with necessary screws etc. complete (Indian make of approved quality).

Providing & fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing & fixing aluminium aluminium extruded section body tubular type universal hydraulic door closer(having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701mm to 1000mm), with double speed adjustmnet with necessary screws etc. complete.

STEEL WORK

Steelwork welded in built-up section, framework in cutting, hoisting, fitting in position and prime coat of red lead paint.

In staircase i.e stringer, tread, railing, handrail, etc.

Providing and fixing M.S. fan clamps type-1 of 16 mm dia M.S. bar bent to shape during laying including hook ends in R.C.C. slab during laying including painting the exposed portion of roof, all per standard design complete.

FLOORING

Granite stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement: 6 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with Red Onix (30 x 60cm)

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absoption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3coarse sand) including grouting the joints with white cement and matching pigments etc, complete.

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absoption's less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1 cement : 3coarse sand) including grouting the joints with white cement and matching pigments etc, complete.

White glazed tiles 10 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry.

WATERPROOFING

Providing & laying six course water proofing treatment with bitumen felt over roofs consisting of first, third & fifth courses of blown or/and residual bitumen applied hot at 13.61 kg & 15.88 kg per 9.29 sq.m of area respectively, second & fourth courses of roofing felt type 3 grade 1 Hessian base self finished bitumen felt & sixth & final course of stone grit 6mm & down size gravel spread at 0.06 cum per 9.29 sq.m i/c preparation of the surface etc. complete.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade 1 Type II in panelling fixing frames with C.P brass/stainless steel screws etc. complete as per Architectural drawing and directions of engineer-in-charge.

Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and riveted/screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of glass panes 4 mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading etc as required complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). With float glass panes of 5.50mm thickness.

FINISHING

15 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand).

12mm cement plaster 1:3 (1 cement : 3 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved quality on wall surface.

Painting (two or more coats) with plastic emulsion paint of approved quality on new work except walls to give an even shade.

Cement Painting: Applying one coat of cement primer of approved quality on wall surface.

Finishing walls with water-proofing cement paint of approved quality on new work (three or more coats) to given shade.

PAVER BLOCK

Providing and laying 80 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) on M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge.

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand including preparation of ground

Providing plinth protection of 50mm thick in cement concrete 1:3:6(1 cement 3course sand 6 graded stone aggregate of 20mm nominal size) i/c finishing the top surface of concrete smooth.

Entrance Canopy

SANITARY

EARTHWORK

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in suspended floors, roofs landing, shelves & their supports balconies, lintels, beams, plinth beams, girders, bressumers and cantilevers upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement:3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

STEEL REINFORCEMENT

Reinforcement for RCC work i/c bending, binding& placing in position complete (b) Tor- Steel bars

FORMWORK

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a) Foundation, footings, bases of columns etc. and mass concrete.

(b) Flat surface such as suspended floor, roofs landings and the like

FINISHING

15 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand).

Water proofing compound. B) Hardcrete Concrete water proofing and hardening liquid.

UNDER GROUND TANK

FOUNDATION

Driven cast-in-place vertical RCC piles i/c reinforcement complete as per drawing and technical specifications.

a)450 mm diameter piles (M20 grade)

EARTHWORK

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

REINFORCED CEMENT CONCRETE WORK

Reinforced cement concrete work in suspended floors, roofs landing, shelves & their supports balconies, lintels, beams, plinth beams, girders, bressumers and cantilevers upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement:3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

STEEL REINFORCEMENT

Reinforcement for RCC work i/c bending, binding& placing in position complete (b) Tor- Steel bars

FORMWORK

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a) Foundation, footings, bases of columns etc. and mass concrete.

(b) Flat surface such as suspended floor, roofs landings and the like

FINISHING

15 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand).

Water proofing compound. B) Hardcrete Concrete water proofing and hardening liquid.

PLUMBING

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous China cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-charge

Providing and fixing white vitreous China flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White vitreous China wash basin size 550x400mm with a 15mm CP brass single hole basin mixer

Providing and fixing white vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing grating of approved quality for Nahni trap: 100 mm nominal diameter

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing: Rectangular shape 453x357 mm

Providing and fixing 600x20 mm C.P. brass Towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (hook type)

Providing and fixing C.P. brass toilet paper holder

Providing and fixing liquid soap container of Glass with C.P. lid and Brackets fixed to wooden cleats with C.P. brass screws

Providing and fixing 100 mm H.C.I. soil, waste and vent pipes

Providing and fixing MS holder bat clamps of approved design to 100mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 100 mm HCI heel rest bend

Providing and fixing 100 mm HCI pass over pipe

Providing and fixing 100 x 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3mm thick bolts and nuts complete

Providing and fixing 100 x 100 x 100 mm HCI branch of the required degree with access doors, insertion rubber washer 3mm thick bolts and nuts complete

Providing and fixing 100 mm HCI bend of the required degree with access door insertion rubber washers bolts and nuts etc. Complete

Providing and fixing 100 mm HCI collar

Providing and fixing lead caulked joints to 100 mm HCI pipe

Providing and fixing MS stays and clamps of approved quality for 100 mm diameter HCI pipe: 50mm HCI pipes and fittings

Providing and fixing 50 mm HCI soil waste and vent pipe

Providing and fixing MS holder bat clamps of approved design to 50 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 50 mm HCI heel rest bend

Providing and fixing 50 mm HCI pass over pipe

Providing and fixing 50 x 50 x 50 x 50 mm HCI branch of the required degree with access doors, insertion rubber washer 3mm thick bolts and nuts complete

Providing and fixing 50 x 50 x 50 mm HCI branch of the required degree with access doors, insertion rubber washer 3mm thick bolts and nuts complete

Providing and fixing 50 mm HCI bend of the required degree with access door insertion rubber washers 3 mm bolts and nuts etc. Complete

Providing and fixing 50 mm HCI collar

Providing and fixing lead caulked joints to 50 mm HCI pipe

Providing and fixing HCI traps with 100 mm inlet and 100 mm outlet of self cleaning design with HCI screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors

Cutting charge in brick masonry walls for fixing 100 mm diameter HCI Pipe and making good the same with brick work in cement mortar 1:3 (1 cement: 3 fine sand)

Cutting charge in brick masonry walls for fixing 50 mm diameter HCI Pipe and making good the same with brick work in cement mortar 1:3 (1 cement: 3 fine sand)

Providing and fixing UPVC soil, waste and vent pipes including all requisite fittings, jointing of pipes and fittings with solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge: 75 mm dia

Providing and fixing PVC traps with 100 mm inlet and 100 mm outlet of self cleaning design with screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors.

SITE DRAIN

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

REINFORCED CONCRETE WORK

Reinforced cement concrete work in beam,suspended floors, roofs (b) 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete (3.12.2) Thermo-Mechanically treated bars

FORM WORK

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a) Foundation, footings, bases of columns etc. and mass concrete.

(b) Flat surface such as suspended floor, roofs landings and the like

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand)

FINISHING

15 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand).

RAIN WATER HARVESTING

Providing and fixing UPVC rain water pipes including all requisite fittings, jointing of pipes and fittings with solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge: 160 mm dia

Providing and fixing PVC traps with 100 mm inlet and 100 mm outlet of self cleaning design with screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors.

Providing and laying in trenches centrifugally cast (spun) iron socket and spigot pipe Class 1A (earth work in trenches to be measured and paid for separately): 300 mm diameter

Providing and laying double socket C.I. bends (medium class): 100 mm, 90 degree

Providing and laying all sockets C.I. tees (medium class of nominal diameter) 100x100 mm

Providing and laying C.I. collars (medium class): 125 mm

Constructing masonry chamber 30 x 30 X 50 cm inside with 2nd class brick work (local first class) in cement mortar 1:5 (1 Cement: 5 fine sand for stop cock with C.I. surface box 100 x 100 x 75 mm (inside) with hinged covers fixed in cement concrete slab 1:2:4 (1 Cement: 2 course: 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 Cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1: 3 (1 Cement: 3 course sand)

BUIDING LINE DRAIN

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

FORM WORK

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a) Foundation, footings, bases of columns etc. and mass concrete.

BRICKWORK

2nd class+B171:B172 (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 fine sand)

FINISHING

15 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC casing capping and conduit pipe with modular type switch ,modular plate size suitable size PVC -box and earthing the point with 1.5mm2 FR PVC inculated copper conductor single core cable etc . as reqd.

GROUP C

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond. Single core cable in surface/recessed PVC conduit etc. as. Reqd.

2 X 2.5mm2+1 X 2.5 mm2 earth wire

2 X 4 mm2+1 X 4 mm2 earth wire

2x10 mm2 + 1x10 mm2 earth wire

2 X 25 mm2+1 X 16 mm2 earth wire

Wiring for light point/power plug with 2 X 4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with 1 No. 4 mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as regd.

S/F fan hook i/c bolt & nuts

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

LT PANEL

SITC of floor mounted Double Door indoor Type Conforming to IP 55 protection, 3 phase, 400 Amps, 440 Volts, 50 Hz, to withstand rough usage and weather, fabrication with 16 SWG CRCA sheet with hinged type doors, detachable gland plates at top for cable chamber, earthing studs, bottom cable entry provision, including supplying and fixing the following switchgear, interlocking between incomer and bus coupler, interconnections with bus bar, internal control wiring, earthing etc. complete as required and as per technical specifications.

a) INCOMING:

(i) 250A, 4 pole 36KA, MCCB with Thermal and Magnetic release with spreader link and rotary handle - 2 nos for 2 incomers.

(II) Bus Bar - TPN Aluminium Main Horizontal Bus Bar of 400 Amps for each phase and neutral.

(III) Interlocking arrangement for 2 incomers and 1 bus coupler.

(IV) Multifunction Meter - 2 nos 2 incomers.

(V) C.T. Resin cast, 250/5 Amps, 15 VA, Class 1

(VI) LED type indicating lamps (Red Yellow Blue) with control MCB = 2 set.

(VII) LED type indicating lamps (ON & OFF) with control MCB = 2 set.

b) BUS COUPLER:

(I) 250A, 4 pole 36KA, MCCB with Thermal and Magnetic release with spreader link and rotary handle - 1 No.

(II) LED type indicating lamps (ON & OFF) with control MCB = 1 Set.

c) OUTGOING

(i)63A, 4 pole 30KA, MCCB with Thermal and Magnetic Release with spreader link and rotary handle - 6 nos.

(II) LED type indicating lamps (ON & OFF) with control MCB = 06 set.

(III)32A TP MCB (C Curve) - 8 nos.

(IV) Interconnetion with Aluminium BusBar.

P/F 125 amp TPN stand ground on load changeover switch (compact design ) 415 /500 V including connection etc as required

S/F bus bar chamber with 4 strips copper bus bar of length 600 mm sutable for 100 amp capacity complete with accessories i/c connection etc as required

EARTHING

Earthing with copper. earth plate 600mm x 600mm x 6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.( without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for G.I. or copper plate eath electrode etc.

S/L 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode i/c soldering etc as reqd.

P/L earth connection from earth electrode with 4mm dia copper wire in 15mm dia G.I. pipe as reqd.

P/L earth connection from earth electrode with 8 SWG dia G.I. wire in 15mm dia G.I. pipe as reqd.

P/F 4mm dia copper wire on surface or in recessed or in recessed for loop earthing as reqd.

S/F 6 way (2+16) way single door single pole and nuetral, prewired, sheet steel MCB distribution board, 240 V on surface/recessed complete with loose wire box, terminals block, tinned Cu, Bus bar, nuetral link, earth bar, din bar, detachable gland plate, interconnection, i/c power coated painting, earthing etc. as reqd. (but without MCB/RCCB/isolator)

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd. single pole.

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd.

S/F 48 sweep (1200m) AC ceiling fan complete with down ro, canopy, 3 (three) blades with regulator etc. as reqd. (Make Bajaj/Usha or Similar)

S/F 305 mm sweep exhaust/ventilation fan complete with all accessories connection etc. as reqd.

S/F surface/Pendent mounting 20 W led Downlight complete with driver i/c connection etc. as reqd.( Approved make) professional lighting.

S/F 100 W flood light including all accessories and connection etc. as reqd.(approved brand)

OINAM OKEN SINGH

Nongmaithem Enterprises