Re Alignment of 350mm and 700mm Dia pumping main at Kulamangalam main road in ward 23

Amount

Supplying and conveying, of following sizes of C.I. SPUN PIPES and SPECIALS - LA class AS PER IS 1536/2001 Amendment No.3.July 2008 Pipes to site, for standard length including cost of pipes, testing charges at factory, labour charges for loading, unloading and stacking at site etc. as directed by the Corporation Engineer - 350mm dia CI

Supply of C.I. Specials - (as per IS 1538 (1993)) etc., complete. - 700mm dia S/S 90 deg bend

700mm dia Flg/spi Tail Piece

700mm dia Flg/Soc Tail Piece

350m dia S/S 90 deg end

Supply and Delivery of MS specials with inside lining/epoxy coating as per IS 13260-1993 and outside coating with cement mortar 20mm thick as per IS 1916-1989 and IS 7322-1985. - 700mm diax16mm thk MS with flanges on both sides

Lowering of M.S pipes and specials into the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. - 700mm dia M.S pipes

Earth work excavation and depositing on bank with an initial lead of 10m and initial lift of 2m inthe following classification including otherincidental charges such as barricading etcexcluding refilling in hard stiff clay,stiff blackcotton,hard red earth, shales, murram, gravel, stoneyearth and earth mixed with small size bouldersand hard gravelly soil etc., complete as directed by the Engineer--in-charge. - 350 mm C.I Pipe

700mm C.I Pipe

700mm M.S Pipe

Bedding uisng stone dust screened not more than 2 mm clean, uncoated and free from injurious amount of dust, soft particles, organic matter, loam or other deleterious substances, properly compacted in 10 cm thick as per the standard specifications as directed by the Corporation Engineer

Disjointing C.I. Tyton S/S pipes and specials, and lifting C.I. Pipes from the trenches and stacking at places shown by the departmental Officers. - 350mm C.I Pipe

700mm C.I Pipe

Lowering of C.I Pipes and specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. - 350mm

Lowering of M.S pipes and specials into the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. - 700mm M.S Pipe

Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) - 350mm C.I Pipe

700mm C.I Pipe

Jointing C.I/ D.I double flanged pipes and specials with rubber insertion or any equivalent to the required specifications with M.S. bolts and nuts etc., complete including charges for special tools and plants such as air compressor and helmets and sheet piles. etc (including cost of jointing materials) - 700mm

Refilling with excavated soil (other than sand) complying with standard specification in layers of 15cm watered well rammed and consolidated after the pipes and specials are laid,jointed and tested etc. and removing and depositing the surplus earth complete as directed by the Engineer--in-charge. - 350mm

Testing of M.S. / C.I. / D.I / P.V.C. / H.D.P.E / pipes with hydraulic testing equipment by filling with water and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes as directed by Deartmental Engineer. - 350mm C.I Pipe

700mm C.I Pipe

Cutting C.I./D.I Pipes true to axis and filing smoothly and finishing the ends complete - 350mm C.I Pipe

700mm C.I Pipe

Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by TWAD Board officers.

Dismantling RCC by manual / by using deploying machineries ( Exiting RCC slab)etc., complete.

Dismantling the Brick / Stone Masonry in cement mortar walls under 3m high clearing away and carefully stacking materials useful for re-use for any thickness of walls

Cement concrete 1:3:6 using Crushed stone sand (Msand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc. complete

Stock brick work with II class bricks in cement mortar 1:4 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete.

Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high etc., complete.

Supplying, fabricating and laying in position MS rounds or RTS rods for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc.complete

Cement concrete 1:1 ½:3 using Crushed stone sand (Msand) and 20mm gauge hard broken stone jelly for reinforced cement concrete works excluding cost of steel, centering, shuttering and cost of steel reinforcement but including laying in position, compacting, curing, finishing, etc., complete.

Add GST 18%

M/s. LUCKY ASSOCIATES (BID ID -1311108)