Loading…
Loading…
Tender Value
Refer Docs
Closing Date
13 Jul 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
93
2 conditions · 1 needing a document upload
The order of precedence for various tender documents shall be as under:1.NIT 2. Special Condition of contract 3. Central Railway Bid Document 4.IRS condition of contract. In case of conflict, in any condition between the above documents the conditions mentioned in lower numbered documents shall prevail; for eg. If there is conflict between NIT & IRS conditions then condition mentioned in NIT will prevail, it being numbered 1, whereas IRS condition is numbered 4
Preferably manufacturers should participate. Participating traders/agents must provide authorization letter issued by the OEM. Authorization letter should preferably be tender specific. In case of general authorization letter, it must clearly indicate the validity period/expiry date. Offers with general authorization letter silent on validity period/expiry date will not be considered for placement of order and that offer is liable to be ignored. Bidders must submit authorization letter along with their offer failing which the offer is liable to be ignored. For orders placed on dealers/traders/agents, documents certifying that the material is sourced from the OEM/OEM authorised dealer will have to be produced by the firm at the time of delivery.
37 conditions
This is an e-tender. Manual Offers/Bids for this tender will not be accepted under any circumstances, only electronic Offers/Bids shall be accepted.
Have you furnished the statement of deviations, if any?
Have you mentioned MAKE/BRAND of OEM
Have you indicated the HSN code of your offered product
Have you kept your offer validity as per "Condition for Responsiveness of Offer"
Have you attached relevant document for MSE if you claimed benefits and preferential treatment as MSE firm
Goods & Services Tax (GST): As per Clause 9.0 and all sub clauses of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024. All tenderers to quote correct HSN code and corresponding GST rate for the item/items quoted. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per Clause 9.0(iv) of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism [RCM] and deposit the same to the concerned tax authority.
The Bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the Standard Governing Conditions of this tender
The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition is not recommended]
Bidders shall also give Declaration as below:- I/We agree to pass on such additional input tax credit as may become available in future under GST scheme, in respect of all the inputs used in the manufacturing and/or supply of final goods/services on the date of supply by way of reduction in price and advise the purchaser accordingly
All bidders shall confirm declaration as below in terms of Clause 5.15 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024 in compliance of restrictions under Rule 144(xi) of GFR- 2017:- a) I have read the clause regarding restrictions on procurement from a bidder of country which shares a land border with India. b) I certify that this bidder is not from such a country or, if from such a country, has-been registered with the competent authority. c) I hereby certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the competent authority is attached). If the bidder fails to give such declaration, as above, then it will be presumed that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If any tenderer is not agreeable to this declaration they have to categorically mention about the disagreement in Techno-Commercial Deviation.
Vendors claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises (MSEs) must necessarily upload relevant documents with their offer in terms of Clause 4.0 of Section II of CENTRAL RAILWAY BID DOCUMENT (Updated) JANUARY-2024. Vendors claiming MSE benefit, despite upward reclassification, must upload relevant MSE document.
Note to Bidders: Bidders are advised to carefully review the contents of the Undertaking/declaration prior to signing, as the submission of false information could lead to rejection of the bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
Validity of offer: Validity of offer should be 90 days. Offers quoted with lesser validity shall be deemed as commercially unresponsive and shall be summarily rejected.
1 location across Maharashtra · 750 Numbers total
Supply of plastic cover for 4-aspect
93265743~CR
93265743
Open - Indigenous
Goods
Jalgaon, Maharashtra
₹0
Exempted
13 Jul 2026
29 Jun 2026
3 items · 750 Numbers total
Supply of plastic cover for 4-aspect Signal unit cover is opened from front side and bottom si de and made of Black Polythene Sheet of 100 micron thickness , Size 1700 MM x 460 MM X205 MM. On bac k side 75 MM wide corner to corner diagonal cross mark of white colour of 100 micron thickness to be provi ded. To tie up cover signal unit suitable nylon rope of 5 MM dia and 4 mtrs Length to be provided on front si de and of 1.5 Mtrs length at centre. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr. Section Engineer (SIGNAL) BHUSAWAL., CR | Maharashtra | 250.00 Numbers |
| Total | 250 Numbers | |
Supply of Plastic cover for 2 Aspect signal unit cover opened from front side and bottom side and made of black polythene sheet of 100 micron thickness of size : 1200MM X 460MM X 205MM. On back side 75 mm wide corner to corner diagonal cross mark of white colour of 100 micron thickness to be provid ed. Tie up cover with signal unit suitable nylon rope (Black Color) of 5mm dia and 4 meter length to be pro vided on front side & of 1.5 mtr length at centre. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr. Section Engineer (SIGNAL) BHUSAWAL., CR | Maharashtra | 400.00 Numbers |
| Total | 400 Numbers | |
Supply of Plastic Cover for 3 Aspect signal unit cover opened from front side and bottom side and made of black polythene sheet of 100 micron thickness size : 1300 MM X 460 MM X 205 MM. On back si de 75 mm wide corner to corner diagonal cross mark of White colour of 100 micron thickness to be provide d. To tie up cover with signal unit suitable nylon rope (Black Colour) of 5 mm dia and 4 meter length to be p rovided on front side and of 1.5 mtr length at centre. [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| Sr. Section Engineer (SIGNAL) BHUSAWAL., CR | Maharashtra | 100.00 Numbers |
| Total | 100 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5260548.pdf
ATTACHMENT
5554109.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .