REPAIRS TO PLASTERING/FLOORING AND OTHER MISCELLANEOUS WORKS AT MIL STN TALBEHAT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by Engineer-in-charge.

Demolition of PCC as in ground floors & pavings not exc. 15 cm thickness (below or above G.L.) complete all as specified & directed by Engineer-in-charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by Engineer-in-charge.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-charge.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection / path finished even & smooth without using extra cement and the like complete all as specified & directed by Engineer-in-charge.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by Engineer-in-charge.

M&L for brick work with fly ash bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.

&F in repairs PVC (SWR) pipes 110mm dia single socketed ,in any length with rubber ring joints ,laid in trenches or into floors complete all as specified & directed by Engineer-in-charge.

S&F in repairs PVC (SWR) pipes 110mm dia single socketed ,in any length with rubber ring joints fixed to wall complete all as specified & directed by Engineer-in-charge.

S&F PVC (SWR) Bends of 110mm dia complete all as specified & directed by Engineer-in-charge.

M & L 15mm thick plaster in C.M. 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified & directed by Engineer-in-charge.

M &L for coloured non-skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed in CM (1:4) complete all as specified & directed by Engineer-in-charge.

M&L glazed colour ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified & directed by Engineer-in-charge.

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

S&F aluminium powder coated sliding type glazed window shutters fixed open track section 100x38x1.5 mm having 3 tracks with members of window shutter of bearing section 38x12x1.5 mm Make : Jindal/Hindalco including necessary fibre wheel rollers suitable handles/knobs to facilitate sliding (two track shutters consisting of colour tinted glass pane of 5mm thick and one shutter of stainless steel wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm) and all necessary jointing cleats, glazing clips, rubber packing, galvanize aluminium snap beading etc complete all as specified & directed by Engineer-in-charge.

&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified & directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staple complete all as specified & directed by Engineer-in-charge.

S&F anodized aluminium grill or guard bars fixed to aluminium windows weight not less than 2.82 Kg/sqm complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of exterior emulsion paint over a coat of primer including preparatory work complete all as specified & directed by Engineer-in-charge.

M&L for preparation of new plastered surface of wall and applying two coat of oil emulsion distemper over a coat of primer with 3mm thick wall care putty complete all as specified & directed by Engineer-in-charge.

S&F in repair 15 mm bore angle valves , fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engineer-in-charge. Make: Parryware (T9939A1) or equivalent

S&F in repair 15 mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engineer-in-charge.

S&F in repair 15 mm Pillar taps, cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed by Engineer-in-charge.

S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union all as specified & directed by Engineer-in-charge.

S&F in repair Stop valves,15mm cast copper alloy, but fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engineer-in-charge.

S&F in repair brass Chromium plated tubular towel rail 20 mm dia D type 60 cm long between flange all as specified & directed by Engineer-in-charge.

S&F vitreous china valve less symphonic action type flushing cistern low level white inlet, ball valves float valves & handle including brackets of 10 litre capacity including down take pipe and making good disturbed portion in CM(1:4) complete all as specified & directed by Engineer-in-charge.

S&F 15 mm dia bore PVC connections with PTMT nuts of length 450 mm long complete all as specified & directed by Engineer-in-charge.

S&F in repair Vitreous china wash hand basin coloured flat back of size 630x450 mm white excluding taps waste chain and plug and porcelain stopper but incl brackets complete fixed on brackets or erecting stand complete all as specified & directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet (pedestal pattern) white with plastic seat cover (excluding fixing cistern and flush pipe anti syphonage pipe etc incl seat cover white closet pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified & directed by Engineer-in-charge.

S&F in repair Curtain rod Aluminium coloured powder coated fancy type curtain rod 20 to 25mm dia with brackets complete all as specified & directed by Engineer-in-charge.

S&F bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as specified and directed by Engineer-in-charge.

Dismantling water tanks with float valve and complete removing to stores exc 250 & not exc 500 ltrs complete all as specified & directed by Engineer-in-charge.

S&F Rotational moulded polyethylene water storage tank 500 Ltr (Cylindrical vertical with closed top) noticed and portion all as pacific SSR Part-I complete all as specified & directed by Engineer-in-charge.

M&L32 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed by Engineer-in-charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed by Engineer-in-charge.

S&F for grating dome 125 mm dia with hole of PTMT complete all as specified & directed by Engineer-in-charge.

PVC (SWR) junction T single tee equal or unequal of 110mm dia complete all as specified & directed by Engineer-in-charge.

S&F in repairs of PVC (SWR) pipes of 75mm dia, in any length with rubber ring joints, laid in trenches complete all as specified & directed by Engineer-in-charge.

S&F in repairs of PVC (SWR) pipes of 75mm dia, in any length with rubber ring joints, fixed to wall complete all as specified & directed by Engineer-in-charge.

S&F PVC (SWR) bends of 75 mm dia complete all as specified & directed by Engineer-in-charge.

PVC (SWR) junction T single tee equal or unequal of 75mm dia complete all as specified & directed by Engineer-in-charge.

S&F in repairs 15mm dia GI Tubing medium grade with all fittings fixed to wall/floor complete all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old plastered surface of wall of any description and applying one coat of oil emulsion paint complete all as specified and directed by Engineer-in-Charge.

M&L for pressed steel frames for doors with one or more rebates of size 165mmx60mm ,including necessary fixing lugs ,hinges ,lock strike plate etc complete all as specified & directed by Engineer-in-charge.

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed by Engineer-in-charge.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long (ISI Marked) complete all as specified & directed by Engineer-in-charge.

M&L for 100mm MS butt hinges medium weight, cold rolled mild steel and fixed to door frame complete all as specified & directed by Engineer-in-charge.

M&L for painting to wooden surfaces with two coats of synthetic enamelled paint over a coat of pink primer on new surfaces complete all as specified & directed by Engineer-in-charge.

S&F 35mm thick factory made glazed and skeleton shutter 2nd class hard wood rails and stiles planed framed and open rebated and prepared to receive glass, gauge etc (without sash bars) with cut and mitred beads for securing glass etc size member of shutter as specified in SSR part I .section and clause 8.24(a) fixed to chowkhats complete all as specified & directed by Engineer-in-charge.

M&L for aluminium alloy handles 150mm, fabricated type anodized complete all as specified & directed by Engineer-in-charge.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed by Engineer in charge. Note: - Opening of existing wind tie where required for taking down of AC sheet is deemed to be included in the rate quoted).

S&F 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed by Engineer in charge. Make : M/S Charminar/Swastik/Everest Industries Ltd.

M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body stainless steel cover governing pivot made of brass other part mild steel heavy duty and fixed complete all as specified & directed by Engineer-in-charge.

S&F 35mm thick moulded PVC door shutter factory made consisting of solid core single leaf flush door of 30mm thick lipped with 15mm thick and 30mm width one stiles and top rails and 10mm thick termite proof, water proof and fire resistant moulded PVC shutter and 2,4,6 raised panel design in different plain and or prealm colours on one side after routing the moulded design on flush door ad 2mm thick plain and or prealm PVC sheet on other side using rubber based adhesive on flush door and solvent cement adhesive on the PVC lipping etc complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick AC two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hooks bolts complete all as specified and directed by Engineer-in charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work complete all as specified & directed by Engineer-in-charge.

M&L for clean sawn 2nd class hard wood as in scantling compete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamelled paint complete all as specified & directed by Engineer-in-charge.

S&F in repair 20mm dia GI tubing medium grade laid in trenches with all fittings complete all as specified & directed by Engineer-in-charge.

high pressure with polythene float and flynut complete, screwed for iron pip or brass ferrule and fixed to 20mm dia GI tubing complete all as specified & directed by Engineer-in-charge.

S&F in repairs sheet glass ordinary quality plain ,3mm thick and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified & directed by Engineer-in-charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified & directed by Engineer-in-charge.

M/S SACHENDRA KUMAR JAIN

HARNAM SINGH ANIL SINGH

M/S R.S.BUNDELA & SONS

M/s Indu Enterprises