PROVN OF OXYGEN PIPE LINE SYSTEM FOR COVID -19 WARD NO III OF MILITARY HOSPITAL JABALPUR UNDER GE WEST JABALPUR

Amount

Supply and fix Bed Head Panel 2 feet Size BHP as per specification and requirement of site complete all as specified and directed Engineer in charge

Supply and fix Oxygen outlets-: Outlets gas specific for the services indicated to accept only compatible quick connect double locking BS type adopters as HTM. 2022 02-01 NFPA -99 Standered all as per specified and directed Engineer in charge.

Supply, laying of 12 OD copper pipes, for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded.

Supply, laying of 15 OD copper pipes, for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded.

Supply, laying of 28 OD copper pipes, for Medical Gases, complete with elbows, flanges, specials, others fittings, and steel supports. The copper pipe should be of solid drawn seamless deoxidised, un-arsenical, half hard, tempered and of degreased material conforming to BS-EN 1057/13348, of copper pipe with colour coded.

Supply and fix for Isolation valves 28mm are to be ball valves, with stainless steel balls and PTFE or Teflon seals. They shall be suitable for a working pressure of 10.2 Kg/cm² gauge. Valves shall be fitted into the pipeline by means of capillary hard soldered joints containing silver. it should be open/close with help of handle with rotation of 90 degreecomplete all as specified and directed.

Supply and fix for Isolation valves 15 mm are to be ball valves, with stainless steel balls and PTFE or Teflon seals. They shall be suitable for a working pressure of 10.2 Kg/cm² gauge. Valves shall be fitted into the pipeline by means of capillary hard soldered joints containing silver. it should be open/close with help of handle with rotation of 90 degreecomplete all as specified and directed.

Supply and fix Oxygen flow meters with mask made from brass, chrome plated. It shall be back pressure compensated type having housing of Polycarbonate autoclavable reusable flow range 0-15 LPM. Fitted with matching adopter for oxygen outlet point and humidifier shall be compatible with Flowmeter and reusable and as per specifications and as required with suitable steel adopter

S&F Manifold three plus three cylinder manifold system with high pressure regulator

S&F Pressure gauge

S&F Junction box

S&F Sub main wiring with four single core PVC Insulated cable four run of size 10.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 32 mm dia with all conduit accessories and two run of 6.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed. Note : - Four run of 10.0 Sqmm & two run of 6.00 Sqmm cable shall be measured as one unit run.

Material & Labour for concealed Point wiring with PVC Insulated 2.5 Sqmm multi-strand copper conductor FRLS cable 1100 Volts grade drawn into and including concealed PVC conduit medium grade not less than 20mm (ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup washers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge.

(a) One switch socket point 15 Amp controlled by one switch on Independent board.

Supply & Fixing Switch socket combination 5 pin 15 Amps flush type universal of polycabonate body complete all as specified & directed.

Supply & Fixing sheet metal enclosure distribution board MCB DB double door , Vertical Triple pole and neutral [VTPN], 440 volts, 4 way Three phase 415 volt with 200 Amp, 10 KA breaking capacity rated copper bus bar PVC insulated copper jumpers of suitable size from the MCCB to the goint curcuits one incoming MCCB and MCB TP 63 A - 02 Nos MCB SP 04 Nos circuits comprising of 3 phase 4 wire of suitable rating complete all as specified and directed. Make : Legrand / siemens/ schneider

S&F sheet metal eclosure MCB DB 4 way Vertical type with 200 Amp rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply & Fixing MCB Triple Pole and Neutral 63 Amps,10KA breaking capacity complete all as specified & directed. Make : Legrand DX3 TPN C 63A AC 408683 / Siemens cat no- 5SL44637 RC / GE /schneider

Supply & Fixing MCB Single Pole 240Volt, 32 Amps,10KA breaking capacity complete all as specified & directed. Make : Legrand / siemens/ schneider

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

mandeka constructions

Tiki Water proofing Co