Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹31.0 L+₹1.5 L (5.06%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹33.2 L+₹3.6 L (12.3%)Rejected-AOC FLAT NO 7 MHAMBRE BLDG DR FRANCISCO LUIS GOMES ROAD VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹33.5 L+₹4.0 L (13.6%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹35.7 L+₹6.2 L (21.1%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹40.0 L
EMD Value
₹80,000
Closing Date
24 Apr 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANATAK
GARRISON ENGINEER GOMANATAK PIN-403802
Structural Repair Pre Mansoon Repairs and Repairs to Distress Concrete to certain Bldgs of AOR of AGE BR I under GE Gomantak Vasco
2023_MES_588255_1
8508/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹80,000
Yes
10 May 2023
5 Apr 2023
25 Apr 2023
5 Apr 2023
24 Apr 2023
19 Apr 2023
Amount
Dismantling of AC corrugated/semi corrugated) sheets as in roof covering all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron of mild steel work of any descriprion not other wise provided for.
M & L for 6 mm thick AC sheet corrugated or semi corrugated sheets in roofs fixed with `L' hook or `J' bolt.
M & L for AC two piece serrated ridge fixed with `L' hook or cranked bolts and washers for corrugated or semi corrugated sheets.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covring cladding to wall fixed with self tapping screws as specified .
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F MS roof trussed framed, trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angles, channel or flat sections) including distance pieces, cleats etc. (Fe- 290 Gde E-165)
M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surfaces exc 10 cm width or girth.
Taking down cement plaster on brick work or stone walls including racking out joints ,hacking for key,scrubing down with water etc
Material & Labour for renderuing in CM 1 : 6 10mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth without using extra cement
Material & Labour for renderuing in CM 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth with out using extra cement including mixing with liquid WPC on top 5mm thick only Note :- Water proofing compound will be paid separately
Material & Labour for renderuing in CM 1:4 ,5mm thickness on ceiling concrete surfaces and finishes the surface even and smooth without using extra cement
Supply only Liquid water proofing compound (Dr Fixit IW+ or equivalent, 200ml per bag of cement).
Preparation of newly plastered surfaces of wall and applying two coats of colour wash over a coat of white wash all as specified and directed.
Material & Labour two coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) over a coat of acrylic amulsion primer on new surfacesincluding preparation of surface of any description all as specified and directed by Engr-in-Charge.
Material & Labour for complete removal of exiting treatment and prepration of old surface and applying two coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) over a coat of acrylic emulsion primer of any description all as specified and directed by Engr-in-Charge.
Material & Labour Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer approved colour/shade complete all as specified and directed by Engr-in-charge.
Material & Labour for providing two coats of oil-bound distemper over a coat of alkali-resistand primer on new plastered surfaces including necessary preparation to surfaces complete all as specified and as directed
M & L for three coats of white wash on newly plastered celing surfaces all as specified and as directed.
Chisel the crack to a 'V' groove of 10mm X 10mm clean the groove to remove all loose laitance & wash with water apply crack filler, Dr Fixit crack-X Paste/Dr Fixit crack X powder with a putty blade.
M& L for two coats of water proofing coating system shalycryl 215 of STP Ltd / Dr FIXIT RAINCOAT 601 / ARALDITE Barrier coat , over a coat of primer including preparation of Newly/old plastered surfaces all as specified & directed by Engr-in-Charge. (The treatment has to be carried out through authorised applicators of the respective companies)
Removing loose concrete/plaster upto sound stratum of ceiling , chajjas, cloumns and beams and cleaned the slurface with water using water jet etc complete all as specified and directed by Engineer-in-Charge.
M & L apply one coat of Dr Fixit rust/Deruster/equivalent chemicals as approved to old rested reinforcement after necessary preparation of surfaces by brush application as per manufacturers instructions.
Priming the old/new steel reinforcement bars with one coat of Fosroc Nito Zinc primer of Dr fixit Epoxy Zinc primer or equivalent as approved by brush applicaton.
M & L for previously prepared steel surface and apply concrete penetracting corrosion inhibitor (EPCO-100) manufactured by M/S Krishna Conchem Product Pvt Ltd) or its equivalent complete all as specified. After few minutes wipe the concrete/steel surface with moist cloth to remove residual materials from the surface and follow up the application.
Bonding the exposed surface with one coat of Fosroc "Nito bond SBR " as per manufacturers instructions.
M & L Polymer modified mortar 20-50 mm thick as reqd at site prepacked, single component structural grade morter Pagel U40 (Dr fixit) or Rendroc RG from Fosroc.incl necessary fair finishes to surfaces
S&F welded steel wire fabric (n.exc 4kg) supplied and fixed complete to wood or steel members.
S&F TMT bars of 10 mm dia and above cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding wth and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
S&F TMT bars of 6mm to 8 mm dia cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding wth and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Material and labour for provideing 10mm thick cement plaster over roof slab (over the area of dismantled roof treatment ) in CM 1:4 mixed with Water proofing compound @ 200 ml.bag of cement finished even and smooth without using extra cement (quoted rate shall exclussive of SBR latex) Note :- Water proofing compound will be paid separately
Material & labour removing of APP treatment from roof surface cleaning of roof tops including removing the esixting treatment by brooming down with steel wire brushing scrapping down with steel scrapper and roughening the existing surfaces to receive plaster Supply & Laying water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as specified, weighing not less than 4.5 kg per Sqnm laid over a coat of cold applied bituminous primer @ 0.20 Kg per sqm by torching the membrane including sealing the over lap while torching with 100mm on length side and 100mm wide side as per manufactorer instuctions including joints and changes in direction the curved with cement mortar 1:3 mixed withWater proofing compound @ 200 Ml/bag of cment cured well before laying of membrance all as per manufacturer instructions and to the satisfaction of Engineer -in-charge including two coats of bituminous aluminium paint. Note (i) irrespective of lap the net covered area will only be measured for payment (ii) The quoted rate is deemed to beinclusive of primer APP membrane & SBR Latex.
Removing building materials etc. to a distance of 2.00 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination
Demolition of damaged masonry (brick/stone/brick masonry wall built in cement mortar as in wall/ manholes etc.
Material and labour for precast cement concrete block masonry with solid blocks in cement concrete 1:3:6, type C1 using 20 mm graded crushed trap stone aggregate exceeding 10 cm in width and set in CM 1:6 complete.
Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement.
Dismantling water tanks exc 250 n exc 500 ltr. capacity and removing to store
Dismantling water tanks exc 500 n exc 1000 ltr. capacity and removing to store
Refixing 20 mm dia. old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)
Refixing 25 mm dia. old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)
Supplying and laying of Galvanised steel tubes medium grade 25 mm dia
Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 500 Ltrs ISI Marked.
Rotational moulded polyethylenewater storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all asspecified in SSR Part I of capacity 1000 Ltrs ISI Marked.
Supply and fixing 25 mm dia. gate valve gun metal.
Taking up or down GI tubing 15 mm dia including cleaning for re-fixing or removal from site.
Dismantling of floor hearth wall tilling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises.
Material &Labour for screed bed or bedding layer of mortar 15 mm thick in 1:4 CM for laying of floor tiles.
Material &Labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc. 0.11 Sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match.
M & L rendering 10 mm thick on fair face of brick work or concrete surface in CM 1;4 on vertical surface for wall tiles.
Glazed ceramic coloured tiles in vertical surface 250x 375x 7 mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles
Supply and fixing 32 mm dia low density polythylrne pipes (LDPE) of presure rating 6 Kg/Cm2 laid in floor or wall complete all as direted.
Supply and fixing for 100/125 mm dia cast iron Nahani trap including grating jointed to waste pipe fixed in cement concrete, type B1 (1:2:4).
Dismantling of cast iron drain pipe 100mm dia jointed in cement mortar and taking out of trenches/wall/floor etc incl fitting in foul condition.
Supply and fixing for 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints and laid in trenches or in floors.
Supply and fixing for 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints and laid in trenches or in floors.
Supply and fixing in PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls in foul condition
Supply and fixing in PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls in foul condition incl
Supply and fixing 75 mm dia PVC SWR bend with access doors.
Supply and fixing 110 mm dia PVC SWR bend with access doors..
Supply and fixing PVC SWR 75 mm junction single (single T) equal or unequal with access doors.
Supply and fixing PVC SWR 110 mm junction single (single T) equal or unequal with access doors.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe)
Supply and fixing plastic water closet seat cover closed pattern with flat bottom any colour and mild steel plastic hinges.
S & F in repair PVC valveless, syphonic action type, flushing cistern, 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level, if any fixed in repairs.
S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm but including brackets and 15mm dia CP fancy type pillar cock.
S & F PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair.
Material &Labour for Cutting holes into or through brick wall or laterite stone wall bulid in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required. (n.exc 150 Sqm)
M & L for PCC 1:3:6 type B2 using (40 mm graded stone aggregate) as in plint protection, paving and hard standing ete complete all as specified and directed.
Demolition of a portion of RCC as in roof slab, beams, chajja etc including all care for safty of structures (reinforcement cut as required to facilitate demolition) .
Material &Labour form work to soffits of suspended slabs /beam/chajjas & similar work not exc 200 mm thick (Horizontal or sloping).
Material &Labour form work to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surfaces of concrete..
Material &Labour RCC (M-30) type B-1 (20 mm graded Agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
AATREYA CONSTRUCTION
M/s J.D. DESAI
M/s RAJ CONSTRUCTION
Leela Enterprises
M/S P S BABU
M/s Gayatri Contruction Co.
SACHIN CONSTRUCTIONS
GANGA SINGH & CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .