Special repair to 05 Nos. blocks (12 Qtrs/Block) of Nuabazar A Type Quarters No.NA-241 to No.252 and NA-265 to NA-336

Amount

Removal/cutting, uprooting of wild growth, unwanted trees etc. from wall surface, chhajjas, Parapets of residential buildings with scaffolding at any height including supply of all labour, materials, T&P etc. all complete as directed by Engineer in-charge. (Considering 6 Qtrs. as a block). (Excluding GST)

Dismantling and removing the following damaged items with required staging, scaffolding, cleaning the debrises including all leads & lifts, transportation with supply of all labour, T&P, all taxes, etc. complete as per direction of Engineer-in-charge Excluding cost of GST.

Cement plaster

Dismantling and removing R.C.C. chajja, shelves, fins and parapet

Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels

Dismantaling 2.5cm thicks Grading Concrete/Terracing.

Door/window Chaukath with shutter (Wood/ Alluminium)

Drilling holes for fixing reinforcement bars of required diameter & length (up to 12 mm dia & 250mm long ) by rotary drills or any approved method ,cleaning the holes by blow out pump and with round brushes ,grouting the reinforcement bars with suitable anchoring adhesive bars with suitable anchoring adhesive resins ,transporting, hoisting,frame work ,placing & proper fixing reinforcement bars including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.(Excluding cost of steel)

P.C.C(1:4:8) of using 40mm. & down H.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope consolidating, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC. (For all floors)

Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge. (For all floors)

12mm. thick polymer modified plaster with CM(1:4) to roof ceiling balcony drops, other R.C.C. surfaces with using chemicals for rustoff including scaffolding, curing, etc. as per direction of Engineer-in-charge (All floors) Excluding cost of GST.

12 MM thick Cement plaster with cement mortar (1:4) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging,scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips forall floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.

Supply Tor/TMT steel of Fe 500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour,materials, transportation charges, T&P, taxes, etc. all completebut excluding GST as per the direction of Engineer-in-charge. NB: No payment shall be made for extra weight than theoretical co-efficient.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank ofapproved quality for R.C.C. structures and deshuttering and removing the same after dueperiod with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in -charge.

Taking out doors and windows shutters from existing Place and returning the same to central store etc. including supply of all materials, labour, T&P, all taxes, etc. as required for the work and as directed by the Engineer-in-charge.( Excluding the cost of GST)

Window /vent

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows,ventilators, coaltaring two coats to wall side face of frame, fixing toposition with required nos. of W.I. clamps of size 25cm to 30cm long,35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting groovesin choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P,all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge.( Excluding GST)

Supply of 32mm thick seasoned piasal wood with anti-termite treated Window& Door shutters having both side styled moulded, bottom rail of 5”size, top rail 5” & middle rails 5” along straight vertical moulded styleof 5” width (total 2 panels) etc. including cost of all materials, loading &unloading Charges, all taxes, transportation charges, stacking at sitestore etc. all complete as directed by Engineer In-Charge.(Excluding GST) N.B.- Size & design decided by the department as per requirement at site.( Excluding the cost of GST)

Supplying, fitting & fixing of WPC door and window frames of required size as per requirment with required staging, scaffolding, including all leads & lifts, transportation charges with supply of all labour, T&P, all taxes etc. complete as per direction of Engineer-in-charge Excluding cost of GST.

Supplying fitting and fixing of 32mm thick WPC door/ window shutters including cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials like hinges, towe bolt, handle, aldrop etc. T&P, all taxes, transportation, etc. all complete as per direction of Engineer-in-charge (Excluding cost of GST) .

Supplying, fitting, fixing of Aluminium grill of approved qaulity for window & ventilator shutter providing rubber beading, aluminium U channels, angles, clips etc. including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P, all taxes etc. complete by excluding GST as directed by the Engineer-in-charge.

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size50mm X 60mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), with full body threaded star headed SS screws having minimum frame density of 750 l‹g/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant and fixed in position with S.S hold fast/lugs/dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.(Excluding GST)

Providing and fixing factory made 18 mm thick WPC (Wood Polymer Composite) solid board shutter having minimum density of 550 I‹g/cum and screw withdrawaI strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunI‹ S.S screws, all as per direction of Engineer-In- Charge. .(Excluding GST)

Supplying, fitting, fixing of mosquito proof net door shutter made out of seasoned piasal wood (32mm. x 75mm. size) batten for style, top rail, bottom rail, lock rail with mosquito proof net (Plasto net 20mm. x 20mm. square mesh) / (Netlon insect screens 20 x 20 square mesh) of approved quality / make with wooden beading, nail and fixing the new frames with all aluminum Handles, tower bolts, stainless steel hinges of approved size/quality ,upto G+3 building height,etc. all complete including cost and supply of all materials,tollage, royalties, labour, T&P, taxes, transportation in all floors but excluding GST as per direction of Engineer-in-charge.

Supplying, fitting & fixing of mosquito proof net (Netlon) of approved quality for window & ventilator after removing the damaged nets, changing with new net fixed to proper position by stitching male female Velcro tape all complete including removing of existing old damaged frame from position,,upto G+3 building height, with cost & supply of all materials, nail, labour, T&P, taxes, transportation,tollage, royalties,but excluding GST etc. as per direction of Engineer-in-charge.

providing fitting and fixing the fabricated MS structures after cutting, bending, makingholes, jointing ,welding as per requirement and Hoisting fabricated structurals, placing inposition as per the drawings or as directed with supply of labour and material,machinery,cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments etc all complete as per direction of Engineer-in-charge.(Excluding GST)

Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus,Fading, including scraping, cleaning, brushing, washing the old paint,with bio wash, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete and as directed by the Engineer-in-charge.( Excluding the cost of GST)

Distempering two coats of approved quality and shade to New work including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including cost & supply of all material labours, T&P scaffoldings, taxes etc. complete but excluding cost of GST as directed by the Engineer in charge.

One coat Priming with water bound cement primer of approved make & shade manufactured by reputed manufacturer over the old wall surface / newly plastered surface after scraping, cleaning the old surface by brushing,removing the flakes, washing the old paint by jet wash with water and jet spray machine of high pressure gun or equivalent to make an even finished surface at all heights with all scaffolding and staging charges including cost,conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.( Excluding the cost of GST)

Painting two coats with approved quality & shade enamel wood paint on new wood work / old wood work over one coat of primerincluding scraping, cleaning, the old paint surface sand papering, fillingthe holes with wax putty etc. all complete including cost and supply ofall materials, labour, T&P, all taxes,transportationcharges,staging,scaffolding, etc. as per direction of Engineer-in-charge. ( Excluding GST)

Painting one coats with approved quality & shade enamel paint on old iron work over one coat of red oxide primer including scraping,cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour,T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in charge.

25mm. (av) thick graded cement concrete in C.C.(1:2:2) using 12mm. to 6mm. size hardgranite chips of approved quality including cleaning the roof top, washing, mixing, hoistinglaying to proper level slope, gradient making rounding hunching at thecorners, joints, finished smooth to exposed surface over 2 coats of sika topseal-107 or equivalent as waterproofing course with cost and supply of all materials, labour, T&P, taxes, tollagetransportations, curing, etc. all complete as per direction of Engineer-in-charge. (excluding Gst)

Close deep chipping and cleaning to R.C.C. surface for receiving cement plaster for tile work with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST

Supplying, fitting & fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles ( premimum Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer-in-charge.

Numbering of Qtrs. with approved colour & shade with specified size of letters etc.all complete as directed by Engineer-in-charge. (Excluding GST), (For all floors)

Dismantling old damaged GI and HCI pipes from walls removing damaged pipes with all leads & lift wand return it to central store WIth supply of all materials labour T& p etc. complete as per the direction of Engineer-in-charge (for all floors).( Excluding the cost of GST)

HCI pipe=110MMM

GI pipe of 15MM TO 40MM

GI pipe above 40mm

Dismantalling of IWC/ EWC/AWC/OWC in brick/ conc. work supply of fittings & materials with socket & screw joints including cutting threads to pipe, disconnecting the pipes with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place but excluding cost of GST as per direction of Engineer-in-charge.

Supplying of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST)

15mm CP stop cock (wt. 450gm)

20mm dia CP stopcock(wt. 450gm)

15mm Connection pipe (PVC/CP)

32 mm steel sink waste

40 mm CP waste

32mm PVC Waste pipe

40mm pvc waste pipe

10 ltr capacity PVC low level cistern

Soap Holder

100mm dia shower

20mm dia 60cm long towel rail

150mm/100 mm dia C.I/CP. Grattings

20mm dia C.P concealed stopcock

15mm dia C.P angle stopcock

15mm long body C.P. Bib cock

15mm CP.Bibcock

15mm dia C.P Pillarcock

Long Flush bend for Cistern

C.P Towel ring

C.P two way bib cock

porcelain 23" IWC (orissa pan)

Commode (p-trap) EWC/AWC with cover

Commode (s-trap) EWC/AWC with cover

25 mm GI tank nipple

Basin rack bolt

CP extension piece

Porcelain kitchen sink (24' x 18" X10" )

Steel Kitchen Sink (24x18x10)cm

5mm thick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw.

1000 ltrs Capacity (PVC-3 core white colour )

Labour charges for Installation of PVC water storage tank of 1000 Ltr Capacity including fitting ,fixing of pipes , bibcocks , valves , stop cocks and other necessary fitings for water supply purpose with transportation , loading , unloading ,supply of all labour, T&P, taxes excluding GST etc. complete as directed by the Engineer-In Charge.

Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Labour charges for fitting ,fixing of low level cistern to all floors with all lead and lift with supply of screw,plug, washer,white cement etc all complete as per specificationwith supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

fixing of wash basin with hole for pillar tap, fixing of racket,making hole etc all complete with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specificationwith supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Fixing of bib cock /pillar cock /stop cock / towel rail/ring as per specificationwith supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia. with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

15mm UPVC Pipe

20mm UPVC Pipe

25mm UPVC Pipe

40mm UPVC Pipe

50mm UPVC Pipe

Supply of U-PVC/G.I fittings of different dia. of medium quality & Sch-80 as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST)

40mm G.I Reducer elbow

50mm G.I. reducer Tee

15mm Dia. U-PVC union

20mm Dia. U-PVC union

25mm Dia. U-PVC union

40mm Dia. U-PVC union

50mm Dia. U-PVC union

15mm Dia. U-PVC elbow

20mm Dia. U-PVC elbow

25mm Dia. U-PVC elbow

40mm Dia. U-PVC elbow

50mm Dia. U-PVC elbow

15mm Dia. U-PVC tee

20mm Dia. U-PVC tee

25mm Dia. U-PVC tee

40mm Dia. U-PVC tee

50mm Dia. U-PVC tee

15mm Dia. U-PVCsocket

20mm Dia. U-PVC socket

25mm Dia. U-PVC socket

40mm Dia. U-PVC socket

50mm Dia. U-PVC socket

20mm Dia. U-PVC MTA(Brass Threaded)

25mm Dia. U-PVC MTA(Brass Threaded)

40mm Dia. U-PVC MTA(Brass Threaded)

50mm Dia. U-PVC MTA(Brass Threaded)

15mm PVC Ball Valve

20mm PVC Ball Valve

25mm PVC Ball Valve

40mm PVC Ball Valve

50mm PVC Ball Valve

U-PVC Paste

Thread tape

Labour charges for laying of PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST)

Layingof 15mm to 25mm dia pipe

Laing of 40mm to 50mm dia pipe

Supplying, Fitting & Fixing the following HCI/PVC pipes and fittings of different dia with ISI mark (Supreme) including loading and unloading at both ends with all cost ofmaterials,labours,T&P,,taxes,royalties etc.Allcomplete as per direction of engineering in charge. (Excluding GST)

110mm PVC Pipe

110mm PVC door bend

110mm PVC plain bend

110mm PVC Single Junction with door

110mm PVC Double Junction with door

110mm PVC P trap

110mm PVC offset

110mm PVC Cowl

110mm PVC Clamp

Making ferrule point excluding fittings etc including cost of all materials, transportation, , taxes of all materials, labour, T&P etc. required for thecomplete in all respect.

NIRANJAN SAHOO (BID ID -3139558)

Skater Infratech India Pvt. Ltd. (BID ID -3139440)

M/s.Bula Bilash Construction (BID ID -3139605)

Bidyadhar Swain (BID ID -3139691)

M/s. P N Construction (BID ID -3139844)