REPAIR REPLACEMENT TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN MISC WORKS IN ZONE A OF AGE BR I AREA UNDER GE MIS MHOW

Amount

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cement all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

M&l for rendering 10mm thick in cement mortar 1:3 on ceiling / concrete surface mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

Supply ony liquid water proofing compound

M&L for preparation of newly plastered surfaces of wall , pillasters,cornices etc and applying of two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tint 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm over new surface including preparation of new surfaces all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

All as per item No. 09 above but one coat of white wash on ceiling complete all as specified and as directed.

M & L for newly plastered surfeces and applying of two coats of distempering over a coat of Chawlk whiting/cement based wall primer all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mm x 200mm size, 6 to 7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in coloured cement to match with colour of tile complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M & L for vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 17 above but in skirting over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

All as per item no 20 above but in skirting including 10mm thick backing coat in CM (1:4 ) complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX30mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for Stone dust filling under floors 50mm thick including watering and consolidation.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete.

Demolition of cement concrete exc 15 cm depth of any description and in any position not otherwise specifically provided (above ground level) including removal of concrete debries to distance exceeding to 500 m all as specified and directed.

M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection,finished the surface of concrete topping even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand , laid in alternate bays complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B2 using 40mm graded stone aggregate as in floor , surfaces of concrete topping finished even and fair (without using extra cement) including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand and laid in alternate bays complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 40mm thick as in floor, coping, finish the surfaces even and smooth with using extra cement complete as specified and directed.

M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

M & L for cutting holes in brick walls built in cement mortar at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 using 20mm graded stone aggregate complete as directed and specified.

M&L for provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including taking down and cleaning of old surface as specified and directed :- (a) Provide PCC (1 : 1.5 : 3) type A0 using 12.5mm graded stone aggregate as in required slope, average thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW manufactured by Dr FIXIT or other equivalent as approved by GE. (b) M&L rendering 15mm thick in CM 1:3 mixed with & including water proofing compound on sides of (Vertical surface) sunken floor slab. (c) Applying first coats of Dr fixit fastflex with a stiff nylon brush and leave 4 to 6 hours for dry. (d) Applying second coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the first coat) and leave 4 to 6 hours for dry. (e) Applying third coat of Dr fixit fastflex with a stiff nylon brush to the direction of 90 degree ( to the second coat) and leave 4 to 6 hours for dry. Note: (a)WPT Shall be done through approved applicator certified by Manufacturer (b)Liquid WPC shall be measured & paid seperately under relevant item.

S&F in repair of vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

Supply and fix in repair of wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S&F in repairs of pedestal pattern Vitreous china wash down water closet pan white colour, with 110mm PVC (SWR) 'P' trap including necessary jointing of front or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphonage pipe and plastic water closet seat cover white complete all as specified and directed.

S&F in repair of Vitreous China uninal bowl, half stall type ,coloured with PTMT urinal spreader for fixing with 15 mm dia pipe / union for discharge pipe, , providing and fixing plugs, bedding urinal against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in coloured cement to match with urinal complete all as specified and directed.

S&F in repairs urinal spreader of PTMT any colour suitable for 15 mm dia pipe. (Minimum weight 60gms)

S&F in repairs health faucet with S.S. flexible pipe of 1.00 metre length including holder complete all as specified and as directed.

S&F in repairs fancy type chromium plated two way bib cock of 15mm bore ,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S & F in repair CP brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed

S & F in repair 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repair of CP fancy type stope valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S&F in repair CP fancy type angle valves,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repair of CP fancy type Stop Valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs CP Brass Fancy type shower rose 75 mm dia with 125mm long CP Nipple of approved quality complete all as specified and directed.

S&F vitrious china urinal half stall white coloured with automatic urinal spreader including providing and fixing plugs,securing urinal against wall in cement mortar 1:2 long brass screwd,pointing around urinal back in cement with brackets, flush pipe,grating anf union for discharge pipe all as specified and directed.

S & F in repair LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair of stainles steel gratings round type of size 150mm (Minimum weight 100 gms) complete all as specified and directed.

S&F in repair CP Toilet paper holder complete all as specified and directed

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guilties embedded in cement mortar (1:3) with MS screws etc complete all as specified

S&Fin repair PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs PVC waste pipe fixed to any type of coupling of length n.exc 1.50 m complete all as specified and directed.

S&F in repair rotational moulded polythylene water storage tank of 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 litres capacity complete all as specified.

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 litres capacity complete all as specified.

M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 litres capacity complete all as specified.

S&F in repair PVC tank Cover suitable for OHT of 500/1000 Litres capacity complete all as specified and directed.

S&F in repair gun metal gate valves 20 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

S& F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 60mm wide with chromium plated bracket guard and railing 500mm long complete all as specified & directed.

M&L for PVC (SWR) floor trap 75mm dia of out let ,plain with grating including jointing with solvent cement complete all as specified

M&L for PVC (SWR) multi floor trap 75mm dia of out let ,plain with grating including jointing with solvent cement complete all as specified.

S & F in repair PVC body bathroom cabinet of size 550 x 450mm with mirror 5.5mm thick complete all as specified.Make :Prayag & Model No 555 or other equivalent as approved by GE.

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F PVC (SWR) branch piece, single (Single Y) equal or unequal 110mm size all as specified .

S&F PVC ( SWR) bends any radius bore of 110 mm all as specified

S&F PVC ( SWR) bends any radius bore of 75 mm all as specified

S&F in repairs 25mm dia Stainless steel curtain rod complete all as specified and directed.

S&F in repairs 25mm dia stainless steel decorative brackets complete all specified and dircted.

Taking up or down steel tubing 15mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Taking down door shutter with frame n.exc 1.5 Sqm each without taking of shutter from the frame complete all as specified and directed.

S&F in repair factory made steel window , with side hung shutter including projecting hinges with steel handle, stay complete with glazing bar and guard bar devetailed or welded complete all as specified.

S&F in repair factory made steel window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar dovetailed or welded complete all as specified.

S&F in repair steel ventilator fixed type with glazing bar complete all as specified and as directed

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed.

Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.0 Sqm all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed.

S&F second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F pressed steel frame of size 105X60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified and directed.

S&F pressed steel frame of size 125X60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

Haking out old brocken glass pan of any size ( upto G+3 Storied building) thickness,size,quality or description) from wooden frames or stone,concrete or brick ,glazed with putty or fixed with beads all as specified and directed.Note: Glass repairing work shall be carried out upto G+3 Storied building .

S & F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed by Engineer - in - Charge .

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan incl hacking out complete all as specified and directed.Note: Glass repairing work shall be carried out upto G+3 Storied building

Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed.

S & F Mild Steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering all as specified

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 100mm long aluminium alloy butt hinges with galvanised mild steel hinge pin,anodised and fixed B-22 all as specified

S & F in repair 100mm long aluminium alloy butt hinges with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified and as directed.

S & F in repair 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

S&F for 150 mm long Aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F in repair 150 mm long Aluminium anodizes barrel tower bolt of extruded section complete all as specified.

S&F 150 mm size aluminium anodized handle complete all as specified

S&F in repiar 150 mm size aluminium anodized handle complete all as specified

S & F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified

S & F in repairs of aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified

M&L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm in width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

S&F in repair 18/19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame work inculding 6 mm thick teak wood lipping edging on all sides complete all as specified and directed.

M&L for welding in repairs not exceeding 2.5 cm in length, to the metal not exceeding 6mm thick complete all as specified and as directed.

M & L for writing letters or figures (Block, Roamn, Italic or Indian) of size not less than 50 mm height and not less than15mm width including stops, commas, lines with synthetic enamel paint including preparing surface etc complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete.

S&F false ceiling at all heights with integral densified calsium silicate reinforced with fibre and natural filler false ceilling tiles of size 595X595mm of approved texture, design and pattern pinhole 8mmthick semi perforated square edge tile having NRC ( noise reduction cogfficient ) of 0.50 (minimum) Light refluctance of 85% (minimum) Non combustable as per BS : 476 (PART-4) fire performance as per BS : 476 ( PART 6&7) humidity resistence of 100% thermal conductivity <0.043 W/m K as per ASTM 518:1991, intrue horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized iron section on proffile,stitched duoble webbed white with 1mm reveal proffile ( White/black) comprising of main-T runner of size 15X 32mm of lenght 3000mm, cross-T of size 15 X 32 mm of lengh 1200mm and secondary intermediate cross-T of size 15 X32mm of lengh 600mm to form grid module of size 600X600mm,from ceiling using galvanized mild steel item, 8mm outer daimeter M-6 dash fasteners, 6mm dia threaded hanger rod and L- shape leval adjuster of size 85X25X2mm Galvanized iron perimeter wall angle of size 19 X 19mm of lenght 3000mm to be fixed on periphery wall /Partition with the help of plastic rawl plugs at 450mm centre and 40mm long dry wall SS screws.NOTE: The work shall be carried out as per specifications and , drawing and all as per direction of Engineer-in-Charge.

Repairing existing collapsible steel gate by providing greasing to the all movable parts of gate of any size and description, adjusting of steel roller, channel pickets ,pivoted flat bars top and bottom runners,locking plates etc complete and make collapsible steel gate functionable complete all as specified and directed by Engineer-in-Charge

Taking down aluminium frame with shutters of size n.exc 3.0 sqm complete all as specified and directed

Taking down shutters of any description n exc 1.50 sq. m each complete all as spd and directed

S&F anodised aluminium frame for doors, windows,ventilators with one or more rebates including cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs aluminium (extruded section) body Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for providing and applying minimum 2mm thick wall care putty over prepared surface to achive the surface even and smooth for painting. Note: Putty work shall be carried out through air less spraying machine (Mechanical method )

M&L for Priming plastered and other surfaces with alkali resistant priming paint on wall. Note: Primer work shall be carried out through air less spraying machine (Mechanical method )

M&L for applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as per Manufacturer's specification. Note: Distembering work shall be carried out through air less spraying machine (Mechanical method )

M/S Sunshine Construction

NIDHI CONSTRUCTION