REPAIR AND MAINTENANCE OF EXTERNAL ELECTRIFICATION AND OTHER ALLIED WORKS AT JINDRAH UNDER GE (ARMY) DHAR ROAD UDHAMPUR

Amount

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PCC (1:4:8) type D-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, Transformer, Panel board, stay, post top lantern, repairs to road cutting, drain, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 50 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 80 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

Taking out existing worn out/old PVC insulated cable in 3.5 core of 185 sqmm to 95 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

Taking out existing worn out/old PVC insulated cable in 3.5 core of 70 sqmm to 35 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

Taking out existing worn out/old PVC insulated cable in 4/2 core of 25 sqmm to 10 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed. Make of Cable : Havells, Polycab, Gloster,Finolex

All as per item Srl No 16 above but size 185 sqmm 3.5 core.

All as per item Srl No 16 above but size 120 sqmm 3.5 core

All as per item Srl No 16 above but size 95 sqmm 3.5 core

All as per item Srl No 16 above but size 70 sqmm 3.5 core

All as per item Srl No 16 above but size 50 sqmm 3.5 core

All as per item Srl No 16 above but size 25 sqmm 4 core

All as per item Srl No 16 above but size 16 sqmm 4 core

All as per item Srl No 16 above but size 10 sqmm 2 core

Taking out existing worn out/old PVC insulated cable in 3 core of 95 Sqmm to 120 sqmm size of 11000 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

Supply & laying HT XLPE Insulated screened aluminium stranded conductor cable PVC bedded galvanized strip armoured heavy duty 11 KV cross sectional area 95 Sqmm 3 Core (Earthed)conforming to IS 7098 lead in duct/trenches complete all as specified and directed Make of Cable:Havells, Polycab, Gloster,Finolex

Supply & laying HT XLPE Insulated screened aluminium stranded conductor cable PVC bedded galvanized strip armoured heavy duty 11 KV cross sectional area 120 Sqmm 3 Core (Earthed)conforming to IS 7098 lead in duct/trenches complete all as specified and directed Make of Cable:Havells, Polycab, Gloster,Finolex

S&F sheet metal enclosure box made out of 3.15 mm thick CRCA sheet with powder coated paint (CPRI approved) double door outdoor type including solid aluminium bus bar of capacity 400 Amp 4 Nos strip alongwith MCCB 250 Amp, 4 pole, 25 KV with locking arrangements, enclosure box to be fixed on plinth foundation 1:2:4 and 150 mm above ground level including MS angle/ channel consisting of necessary fixing arrangements for incoming & out going cables with cable glands, lugs, nut, bolts, washers and fixing arrangement , PCC work including necessary flat iron clamps with nuts, bolts & washers and Powder coated all as specified and directed. Make of MCCB - Legrand/L&T/Schenider.

Supply only cable jointing kit for 11 KV (earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm. Make : M-seal / Denson / cabseal.

Supply only cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm. Make : M-seal / Denson / cabseal.

Supply only cable jointing kit for 11 KV (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm. Make : M-seal / Denson / cabseal.

Supply only cable jointing kit for 11 KV (earthed) grade cable for COMPOUND TYPE straight joint out door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm. Make : M-seal / Denson / cabseal.

Dismantling taking out broken/worn out/deshaped steel/PCC pole any type of 8.5 to 9.0 mtr long

Supply, Errecting and fixing of true Vertical position steel tubular swaged pole complete with coat iron base plate, finial taper plug, bolt, nuts and screw,weld and reduced section and logitudional weld Seam through out entire length of pole including 2 coats of black bituminious paint through out intrnely and externely up to planting depth and remaining exterior portion of pole with two caot of aluminium paint over a coat of red oxide as specified type 410 SP 31 (9.00 Mtr long) all as specified and directed at site. NOTE - Excavation and Earth work and PCC in foundation shall be measured and paid seprately.. Make : Surjit Steel Industries / Vikram Industries/Mohinder Industries/Advance tube jammu

Dimentling and taking down old/unsv cross arms, bracing, supports etc complete all as specified and directed.

S&F cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paints complte all as specified and directed.

Dismetling and taking down old/unsv ACSR conductor any size complete all as specified and directed.

S/F ACSR conductor incl jointing with existing conductor and straining on LT pole and proper fastening to pin/shackle insulators with aluminium binding wires and required jumpering connection all as directed. Note :- Size of aluminium conductor as per site requirement will be directed by Engineer-in-Charge. Make :Bharat Conductors/NICCO/Jayshree (Aditya birla)

Dismantling and taking down old/unsv insulator of any type any size from pole/stay complete all as specified and directed.

S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F shackle type,porcelian vitreous white, brown or green insulator including galvanised mild steel straps, washers, insulators bolts ,washer and nuts of size 100 mm height and 115 mm dia for 1100 Volts grade complete all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F Loop type insulator, porcelian vitreous brown of size 65x90mm and clearence hole 16mm all as specified and directed. Make : Jaipuria / BHEL /Jayshree or equivalent

S&F Disc type insulator porcelain, vitrous 145mm high and 255 mm dia ball and socket type white, brown or green single disc with tension clamp for conductor for working pressure voltage 11000 V including dismantling taking out unsv one from Pole. Make : Jaipuria / BHEL /Jayshree or equivalent

M/L for Stay assy using 16mm dia galvanised rod complete all as shown in electrical plate No 1 of SSR Part I incl dismantling unsv one all as specified and directed. (Clamps, loop insulator, earth work, PCC measured separately)

S/F for stay wire using galvanised steel strand of 7/3.15mm complete with necessary binding incl dismantling taking down unserviceable one all as specified and directed

M&L triple pole mechanically operated GOD mounted on insulators and steel frame with operating mechanism worked from ground level 11000 volts grade of current carrying capacity up to 200 Amps complete incl removing the existing U/S one.

M&L for restraining of overhead ACSR conductor of any size of 5 conductor on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed

M&L for restraining of ACSR conductor of any size of 2 conductor on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumpering connection and insulator binding with aluminium conductor providing required T&P all as specified and directed

S&F MCCB 400 Amps 4 Pole, 35 KA, 415 V, 50 Hz adjustable type and connecting up in the existing panel location including taking out existing unserviceable MCCB complete all as specified and as directed by Engineer-in-Charge. Make : Legrand/Schenider (Electric)/L&T/Havells

All as per item Srl No 49 above but MCCB 250 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T/Havells

All as per item Srl No 49 above but MCCB 200 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T/Havells

All as per item Srl No 49 above but MCCB 160 Amps 4 Pole, 25 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T/Havells

All as per item Srl No 49 above but MCCB 100 Amps 4 Pole, 16 KA, 415 V, 50 Hz complete all as specified and directed. Make : Legrand/Schenider (Electric)/L&T/Havells

M&L for painting and write pole number of steel tubular pole with one coat of alumium paint incl cross arm, bracings, supports, nuts, bolts, of LT OH line from above copping to top of pole and marking with alternate white and yellow/black paint strip 30 cm wide (5 Nos) with synthetic enamelled paint all as specified and directed.

M&L for trimming of branches of trees touching LT/HT electric over head line and making clear about 3 mtr in radius by climbing up tree or by providing ladder, at a height 7 mtr and above and carrying and depositing where directed not exceeding 50 mtr.

Dismantling taking down unserviceable flood/street/post top lantern/gate light fitting any type any capacity from Pole/Building for replacement complete all as specified and directed.

S&F Decorative Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distribution, die-cast aluminium IP-65 luminaries with high power LED as light source of capacity 40 Watt, 6500K complete all as specified and as directed by Engr-in-charge. Make - Crompton cat part No LPTO-40-CDL -M or equivalent in Philips / Wipro/Havells

Servicing, repairing, overhauling and testing of Voltage Stabilizer of capacity 200 KVA by disconnecting the incoming and outgoing connection strip opening the stabilizer complete for taking out the unserviceable servo motors, auto control, circuit plates, dimmer and switches, voltmeter with switches and replace the following and testing on full load as directed by the Engineer-in-Charge for the following Capacity :-(a) Servo motor as per existing size - 01 No, (b) Voltmeter 0 to 500 Volts with switch. - 01 No, (c) Voltage on off adjusting switch (Auto control Switch), (d) Supply and pouring transformer oil after dehydrating the sump - 200 Ltrs, (e) Roller Wheels as per existing size - 04 Nos, (f) Voltmeter 0-300 Volts - 03 Nos (g) Supply and fixing of dimmer 400 KVA -03 Nos

Servicing, repairing, overhauling and testing of Voltage Stabilizer of capacity 100 KVA by disconnecting the incoming and outgoing connection strip opening the stabilizer complete for taking out the unserviceable servo motors, auto control, circuit plates, dimmer and switches, voltmeter with switches and replace the following and testing on full load as directed by the Engineer-in-Charge for the following Capacity :-(a) Servo motor as per existing size - 01 No, (b) Voltmeter 0 to 500 Volts with switch. - 01 No, (c) Voltage on off adjusting switch (Auto control Switch), (d) Supply and pouring transformer oil after dehydrating the sump - 200 Ltrs, (e) Roller Wheels as per existing size - 04 Nos, (f) Voltmeter 0-300 Volts - 03 Nos (g) Supply and fixing of dimmer 100 KVA -03 Nos

S&F street light junction box of size 200mm x 140mm x95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising with the following including dismantling taking down unsv complete all as specified and directed :- (a) Bus bar with two aluminium strips, 63 amps cap insulated insulators, including color coding , incl PVC cable of suitable size from bus bar to MCB. (b) MCB SPN 5 to 30 amps 01 No. (c) Clamps made out of 25mm x 3mm flat iron duly welded with nuts & bolts complete all as specified and directed. Make : Sintex/Hensel or equivalents.

S&F service connection with twin core 6 sqmm 240 volt heavy duty unarmoured PVC insulated stranded aluminium conductor cable with GI supporting wire of suitable size in replacement of old unsv conductor cable complete. Make : Plaza/Polycab/Havells/Finolex.

K S BUILDERS

S S BUILDERS

M/S Builders Indias

LUXMI ELECTRONIC WORKS