8558 SPECIAL REPAIRS TO BLDG NO JC-08, JC-09 AND JC-10 UNDER GE (CENTRAL) PUNE

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L PCC 1:3;6 type C1 (using 20mm graded crushed stone aggregate) as in steel chowkhats, hold fasts and bed blocks etc including necessary form work complete all as specified and directed.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

All as per item no.08081 but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 3 Nos 100 mm long stainless steel butt hinges. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2020 Part II complete all as specified and directed.

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed.

S&F butt hinges 100mm, medium weight complete

S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S&F in repairs harrison rails (Curtain rod/drapery rod), 20mm dia, stainless steel with and including fency type stainless bracket / wall to wall 02 Nos of each opening and stainless steel side stopper fency type of required shape and size 2 Nos of each opening complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section body) complete all as specified and directed

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side the MD land at the location notified complete all as specified and directed.

Demolition of brick work / Stone masonary / PCC block masonary build in cement morter of any description and removing of rubbish from the premices.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement (@ 150MM c/c both ways) complete

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde C-5 and setting in CM 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in levelling course / sub base of flooring complete all as specified and directed.

M & L non skid ceramic coloured tiles 600X600 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete.

.Ditto but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm/300x600x7mm/450x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified.

M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Removing of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab all as specified and directed.

M&L water proofing treatment to RCC roof slab,walls,chajjas etc,shall be carried out as specified below and as directed by Engr-in-charge(a) M7L for 10mm thick plaster bscreed bed layer in CM 1:3 on concrete surfaces mixed with WPC @ 3% by weight of Cement.(b) Preparing plastered surfaces of roof slab,walls, chajjas etc by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminius primer @ 0.40 ltr per Sqm of area complete all as specified .(c) Laying APP polymer modified approved membrane ,non woven,polyster,weighing not less than 3.5Kg /Sqm and 3mm thick with laps and over laps as specified and joints sealed and applied complete by torch application methd all as specified and directed by Engr -in-charge .Carring out test by flooding water for 24 hrs for leekage and seepage and rectifying the same to the entire satisfaction of GE.(d0 Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15ltr/Sqm on the top of membrane complete all as specified and directed by Engr-in-Charge.

Taking down plastering on lathing (other than wire-netting), without removing lathing, but in cement lime or cement mortar (ditto).

M&L rendering 15mm thick on stone masonary surfaces other than fair faces of brick surfaces work or stone surfaces in CM 1:6 finished even and smooth without using extra cement

M&L rendering 15mm thick in CM 1:4 on brick /stone surfaces finished even and smooth without using extra cement

M& L dubbing out average 10mm thick on irregular face of walls (when specifically ordered in writing)

All as above but 10mm thick in CM 1:3 as in ceiling inclusive of fixing GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding,joists etc in walls, ceilings stanchions,beam,etc. including all laps,cutting and waste complete

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer of same make over external wall surfaces complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over 2mm thick wall care putty complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L for 8 mm thick one side laminated gypsum ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2-3 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified

Dismantling of single layer manglore pattern tiles and ridge in roofing /AC sheet/GI Sheet roofing complete all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15cm including tilting fillets complete all as specified and as directed.

Dismantling timber scantling of size 10 Sqcm and over in section as in unframed work complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

Dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs complete all as specified and directed.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repair vitreous china pedestal pattern water closet white with including cast iron 'P' or 'S' trap, matching sheet cover and wall hung cistern with drainage pipe and connection to trap seat cover and . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-5047N or equivalent model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-5053N or equivalent model in KOHLER and ROCA.

S&F in repair Brass CP wall mixer for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-5281N or equivalent model in KOHLER and ROCA.

S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-1989 or equivalent model in KOHLER and ROCA.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repair 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-5015 or equivalent model in KOHLER and ROCA.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.Make Jaquar cat part no:CAN-1171 N or Techno commercial equivalent model in KOHLER and ROCA.

Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed

Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of pre-painted cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. Make Jaquar cat part no:CNS -WHT-801 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs chromium plated soap dish approximate size 160x 160x9 complete all as specified and directed.Make Jaquar cat part no:AKP-35731P or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair tubular towel rail, 20mm dia, D type, 60cm longv between flanges Make Jaquar cat part no:AKP-35711PS or Techno commercial equivalent model in KOHLER and ROCA.

S&F Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag / Blue Star / Nirali

S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms)

Dismantling cast iron work of any de scription and in any position

S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

.ditto- but 75mm bore

S& F 110mm PVC(SWR) (any radius),diminishing pieces or tapers(larger bore measured) fitted withoval access door

.ditto- but 75mm bore

S&F 110mm PVC (SWR) bands

S&F 75mm PVC (SWR)bands

S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) gully trap 150x100 square or round mouth,type P incl jointing to waste pipe fixed in cement cncrete type B1 (1:2:4) complete all as directed

S&F PVC (SWR) cowl 75/100mmdia as required complete

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete.

S&F PVC (SWR) Coupler 75/110mm dia bore complete.

M&L for providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including eathering, slightly rounded or chamfered angles and throating, as directed

M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface complete

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

Demolition/Breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC of the Pipes with Bed, complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200 mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, window cills etc complete all as specified and directed by Engr-in-charge

S&F in 18/19 mm thick prelaminated Medium density fibre board, exterior grade, fixed to timber framework with screws prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed. Make : Duro/National/Archid Ply wood.

S&F 100 mm long,designer pattern ss handles for fixing in cupboards all as directed and as specified by Engr-in Charge

S&F ,Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F telescopic drawer channel 19" long complete all as specified and directed by Engr in charge

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified.

S&F Locks, drawer, grade I, size 50 mm

M & L Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement slurry and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed.

Taking down of existing Ceilling fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs and painting complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC casing caping 25mm wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims.

(a) One light point controlled by one switch complete all as specified and directed.

(c) One fan point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

(d) One exhaust fan point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

(e) One call bell point controlled by push bottom

(f) One 5/6 Amp socket controlled by one switch same board complete all as specified.

(g) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 107 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

Supply and fix LED in repairs building security light 30 W IP 65 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F socket out let 5/ 6 Amps 3 pin modular type incl connection complete all as specified and as directed

S&F modular bell push type single pole one way 5/6 amps including connection complete all as specified and as directed

S&F of modular rotating step type electronic fan regulator, 120W/ 280 volts two module including connection complete all as specified and as directed.

S&F modular socket twin type, 5 pin 6/16 Amps incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F multi music cell bell including connection complete all as specified and as directed.

S&F in repairs ceiling rose, surface, three terminals incl connection and back plate complete all as specified and as directed.

Supply and fixing in repairs round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified

Supply and fixing LED tube lights 4 feet fitting 1x 20W, 220V, Ac aluminium housing body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete.

Supply and fixing PVC LED light fitting 2 feet, 10 watt 220 V AC including connecting up with flexible copper conductor cable of suitable size complete.

S&F Sub main wiring with 2 runs of single core, 6 Sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVC casing capping with fitting/accessories, fixed on roof, walls, ceiling etc including 6 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC conduit and its accessories (ii) Two runs of cable and one run of earth wire of size 6 sqmm and including taking down of old U/S submain (iii) taking down of old U/s wiring

S&F in repairs of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit with cover incl excavation and earth work in any type of soil and testing on completion etc complete.

Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(a) SP 5 To 32 AMP

(b) SPN 32 AMP

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L for laying of CABLE COVER 100MM dia 2 Nos half round (for bottom and top) and before laying excavation of area shall be levelled all as specified and directed.

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

Supply and laying 40 mm GI pipe light grade with and incl all fittings such as bends, elbows, tees short pieces, union etc in trenches or fixing on wall complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA B curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(a) SPN 32 AMP

Suma Construction (BID ID -3198536)

Parhar Enterprise (BID ID -3199798)

Agarwal Agencies (BID ID -3199981)

SARATH ENTERPRISES (BID ID -3198471)

M/s Asrani and sons (BID ID -3199975)

R K CONSTRUCTION AND ENGINEERING (BID ID -3200172)

Vijay Construction and Company (BID ID -3199579)