Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
8 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRACK 1
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the documents shall lead to summarily rejection of the offer.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil Engineering work.
14 conditions · 2 needing a document upload
The local content requirement for this work isminimum 50% forMake in India compliance. If the tenderer does not submit therequired local content percentage in the proposalsubmitted, theproposal will be summarily rejected. The tendererhas to enterthe local content percentage as required, under Sr.No. 2 ofCommercial-Compliance with their offer
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Indian Railways Standard General Conditions of Contract, April 2022 (IRGCC, April 2022) with correction slips issued up to date of inviting tender will be applicable for this tender.
If the bidder submits Bid security in the form ofBank Guarantee "The original Bank Guaranteeshould be delivered in person receive anddispatch section of this office (i.e. DRM office,Engineering Branch, West Central Railway,Jabalpur) before closing date for submission ofbids (i.e. excluding the last dateofsubmissionof bids)
Maintenance period is 06 months or one monsoon whichever is later from the date of actual completion date.
Provision of drain/drain improvement at Jabalpur (JBP) & Madan Mahal (MML) Yard in connection with various track renewal work under jurisdiction of Divisional Engineer Central section.
DRMW-JBP-229-2026~WCR
DRMW-JBP-229-2026
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹2.2 L
13 Nov 2026
13 Nov 2026
24 Nov 2026
24 items across 1 schedule · ₹1,21,17,576.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 1km | Tonne | 1000 | 128.28 | 1,28,280 |
| 2 | All kinds of soil | cum | 3500 | 205.45 | 7,19,075 |
| 3 | Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm | Metre | 100 | 651.55 | 65,155 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 300 | 7,365.15 | 22,09,545 |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 100 | 6,833.4 | 6,83,340 |
| 6 | Foundations, footings, bases for columns | Sqm | 1000 | 307.95 | 3,07,950 |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 200 | 8,364.2 | 16,72,840 |
| 8 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 1000 | 669.55 | 6,69,550 |
| 9 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 50 | 766.55 | 38,327.5 |
| 10 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 16000 | 89.65 | 14,34,400 |
| 11 | Cement Mortar 1:4 ( 1 cement : 4 coarse sand) | cum | 50 | 6,528.7 | 3,26,435 |
| 12 | In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete | Kg | 20000 | 102.25 | 20,45,000 |
| 13 | 110 mm diameter | Metre | 100 | 319.75 | 31,975 |
| 14 | 1:4 (1 cement: 4 fine sand) | Sqm | 300 | 294.85 | 88,455 |
| 15 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 700 | 140.05 | 98,035 |
| 16 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. | Each | 300 | 89.45 | 26,835 |
| 17 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm | Metre | 800 | 285.9 | 2,28,720 |
| 18 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 90 | 2,928.1 | 2,63,529 |
| 19 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. | Kg | 20000 | 3.2 | 64,000 |
| 20 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 1000 | 219.35 | 2,19,350 |
| 21 | 300 mm diameter S.W. pipe | Metre | 250 | 1,089.1 | 2,72,275 |
| 22 | 300 mm dia. R.C.C. pipe | Metre | 500 | 902.05 | 4,51,025 |
| 23 | For pipes 100 to 250 mm diameter | Each | 50 | 683.7 | 34,185 |
| 24 | For pipes 250 to 300 mm diameter | Each | 50 | 785.9 | 39,295 |
| Schedule total | ₹1,21,17,576.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument7.pdf
ATTACHMENT
SpecialCondtions.pdf
ATTACHMENT
letterforcredit.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
RlyBdsletterdated03.6.24JPO-CableCut.pdf
ATTACHMENT
Circular-MakeinIndia.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .