A. Partial repairing of pump, Motor and Starter shed (BOQ 1-2), B. Fabrication of 3 nos movable Sheds for electrical swich gear installed at different location of mines (BOQ 3-5)w.r.t Konar Exp , BnK Area

Amount

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 65X65X6mm (2 X4X2.75)+(2 X 3.15)+(2 X 0.15) = 28.60 X4.9 KG/ M = 140.14 KG 50X50X6mm =4.5 KG/M (2.75X6)+(2X0.30)+(2X0.15)X 4.5KG = 78.3 Existing weight of single shed = 218.44 Repair portion =60 % of existing shed =131.06

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.80 mm thick with zinc coating not less than 275 gm/m² (2x2x2.75x3.15=34.65 sqm) + (1x2.75x2.75=7.36 sqm)=42.21 sqm Repair portion =60 % of existing =25.32

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 75X75X6mm (2 X4X2.75)+(2 X 3.15)+(2 X 0.15) = 28.60 X6.8 KG/ M = 194 KG 50X50X6mm =4.5 KG/M (2.75X6)+(2X0.30)+(2X0.15)X 4.5KG = 78.3

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.80 mm thick with zinc coating not less than 275 gm/m² (2x2x2.75x3.15=34.65 sqm) + (1x2.75x2.75=7.36 sqm)=42.21 sqm

Total impact of GST for the purpose of CTC

M/S SHAILESH KUMAR SINGH

RAJA ELECTRICAL WORKS