Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAdmitted-Fee/PreQual/Technical/Finance KRISHNAGIRI | TAMIL NADU | 635001 | ₹7.2 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹7.3 L+₹11,368 (1.58%)Admitted-Fee/PreQual/Technical/Finance 1035 A 2ND FLOOR J V STREET SUDHAKAR NAGAR VILUPPURAM | ₹7.3 L+₹11,368 (1.58%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | DEVAKI CONSTRUCTIONS L2 | Narayanasamy L1 |
|---|---|---|---|---|---|
| 1.00Providing new Bore well with 5HP Motor and Accessories and Pumping main 100m at Venkatesapuram in Perumpakkam Panchayat | |||||
| 1.01 | Cost of Geophysical Investigation Charges | 1 | no | 4,600 ₹4,600 | 4,000 ₹4,000 Lowest |
| 1.02 | Cost of 150mm dia PVC Casing pipe. | 6 | m | 457 ₹2,742 Lowest | 457 ₹2,742 Lowest |
| 1.03 | Cost of 150mm dia PVC Slotted Casing pipe. | 18 | m | 594 ₹10,692 Lowest | 594 ₹10,692 Lowest |
| 1.04 | Drilling bore well of sizxe 6"to 8" dia in sedimentary formation using hand bore set including insertion of casing pipe etc,. and supplying and packing of pebbles ( conveyence of hand bore set including and unloading to be done by the contracter) | 24 | m | 1,016 ₹24,384 Lowest | 1,016 ₹24,384 Lowest |
| 1.05 | Reaming from 140mm/150mm dia pilot bore to 300mm dia bore as directed by the tead board officer upto 60m depth end from ground level | 24 | m | 526 ₹12,624 Lowest | 526 ₹12,624 Lowest |
| 1.06 | Labour charges for inserting PVC casing pipes (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement pasete etc., complete supply and packing the annular space with pebbles of size & quality as approved by the Executive Engineer,Departmental officers Board, 165 mm Casing assembly. | 24 | m | 389.67 ₹9,352.08 Lowest | 389.67 ₹9,352.08 Lowest |
| 1.07 | charges for developing the bore well with air compressor of 300 cfm capacity including transportation labour and fuei charges for compressor as directed by tead board officers and conducting yield test by v notch methods. | 8 | Hrs | 2,403 ₹19,224 Lowest | 2,403 ₹19,224 Lowest |
| 1.08 | Drilling of 150mm dia Borewell in Hard rock area using DTH rig including cost of Transportation charges for rig and others supporting vehicle etc., complete | 90 | m | 330 ₹29,700 Lowest | 330 ₹29,700 Lowest |
| 1.09 | Cost and supply of 5.0 HP Three phase submersible motor as per IS 8034 without panel board of 100 lpm x 175m. WD-M1644 | 1 | No | 68,349 ₹68,349 Lowest | 68,349 ₹68,349 Lowest |
Tender Value
Refer Docs
EMD Value
₹8,600
Closing Date
17 Sept 2026, 1:00 pmClosed
PANCHAYAT PRESIDENT
PANCHAYAT OFFICE, PERUMPAKKAM
TN / VPM / PERUMPAKKAM / 15TH CFC 25-26 / 01
2026_RDTN_701219_1
TN / VPM / PERUMPAKKAM / 15TH CFC 25-26 / 01
Open Tender
Civil Works
Works
KNAI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,600
17 Sept 2026
3 Sept 2026
17 Sept 2026
3 Sept 2026
17 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing new Bore well with 5HP Motor and Accessories and Pumping main 100m at Venkatesapuram in Perumpakkam Panchayat | |||||
| 1.01 | Cost of Geophysical Investigation Charges | 1 | no | - | - |
| 1.02 | Cost of 150mm dia PVC Casing pipe. | 6 | m | - | - |
| 1.03 | Cost of 150mm dia PVC Slotted Casing pipe. | 18 | m | - | - |
| 1.04 | Drilling bore well of sizxe 6"to 8" dia in sedimentary formation using hand bore set including insertion of casing pipe etc,. and supplying and packing of pebbles ( conveyence of hand bore set including and unloading to be done by the contracter) | 24 | m | - | - |
| 1.05 | Reaming from 140mm/150mm dia pilot bore to 300mm dia bore as directed by the tead board officer upto 60m depth end from ground level | 24 | m | - | - |
| 1.06 | Labour charges for inserting PVC casing pipes (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement pasete etc., complete supply and packing the annular space with pebbles of size & quality as approved by the Executive Engineer,Departmental officers Board, 165 mm Casing assembly. | 24 | m | - | - |
| 1.07 | charges for developing the bore well with air compressor of 300 cfm capacity including transportation labour and fuei charges for compressor as directed by tead board officers and conducting yield test by v notch methods. | 8 | Hrs | - | - |
| 1.08 | Drilling of 150mm dia Borewell in Hard rock area using DTH rig including cost of Transportation charges for rig and others supporting vehicle etc., complete | 90 | m | - | - |
| 1.09 | Cost and supply of 5.0 HP Three phase submersible motor as per IS 8034 without panel board of 100 lpm x 175m. WD-M1644 | 1 | No | - | - |
stage.html
html • 0.02 MB
finance_842809.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_842809.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .