PROVN OF LED STREET LIGHTS WITH POLE AT DEMO SQN UNDER GE (AWC) MHOW

Amount

Excavation in trenches in any type of soil, n. exc. 1.5m wide and n. exc. 1.5m deep and getting out for laying of cables/pipes etc including forming bottom surfaces to the required level/slope complete.

Excavation in trenches exc 1.5m wide but exc 1.5m and n exc 3.0m deep for foundation of poles strut/stays etc n exc 10 sqm on plan and getting out in any type of soil.

Returnning filling in including spreading leveling watering and well ramming in layers not exc 25cm any types of soil.

Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete.

M&L river washed and screened dry fine sand filling in trenches below and above / around under ground cable for cable protection, in duct under & abobe the cables including punning around cable complete all as specified and directed. Note :- Punned thickness shall be measured for payment.

M&L for cement concrete1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in coping & the like etc. including weathering slightly rounded/chamfered angle with & including necessary use & waste of form wk for fair finished surfaces complete all as specified and directed.

Supply and laying galvanised iron pipe 'light Grade' 80 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed . Make Jindal/Prakash Surya/Tata

Supply and laying galvanised iron pipe 'light Grade' 50 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed . Make:- Jindal /Prakash Surya /Tata

Supply and laying galvanised iron pipe 'light Grade' 40 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed . Make:- Jindal /Prakash Surya /Tata

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 95 sqmm, 3.5 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site. Make:- Polycab, RR Kabel, Gloster

Description same all as per item No 12.00 here in before but 50 Sqmm x3.5 core

Description same all as per item No 12.00 here in before but 16 Sqmm x4 core

M & L for unreinforced PCC Cable protection cover , Class LV ,Type1 flat ,size 250x150x40mm as cable protection laid flat width wise complete all as specified and directed.

Supply and Fixing steel tublar swan neck pole with cast iron base plate, 410-SP-31, as per sample of length 09 Mtrs duly painted, finial taper plug,bolts, nuts,& screws complete all as specified and directed. Make- NTC Kanpur/Bharat Conduit/ BCW Kanpur

Supply, fixing, testing and commissioning in replacement energy saving long life LED Street light fitting limanaries 90 watt LED pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 65 class -1 color temperture 5700K power factor not less then 0.95 , total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge. Make - Bajaj cat part No- BRTFG 90 W LED I V2, Bajaj cat part No- BRLEP 90W LED V3, C&S cat part No- LTE SSI90W LED, INDUS-i/90W and Havells cat part No- ENDURAPEARLPLUSSL 90W LED 757 SASY TO PC.

Supplying and fixing in replacement of PVC junction box of size 200mmX160mmX98mm , including connector block , two holes for incoming and outgoing cables, providing cable glands double compression as per requirement, Connectors etc complete with fixing arrangement and MS hexagonal bolts, nuts and washers for arrangements to pole/ surfaces complete all as specified and directed by Engr-in-Charge. Make-Hensel / Syntax / Siemens

Supply, fixing, testing and commissioning in replacement of nature switch of capacity 8 KW Single phase consisting of power contactor of suitable rating MCB SP 25AMPs – 03 No. complete. Make-Swadeep or equivelant as approved by GE(AWC)

Material and laobour for earthing in repair complete with galvanized steel earth plate electrode 600mm x600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm x6mm main earthing lead by means of galvanised bolts, nuts and washer all as shown in electrical plate No 3 SSR Part-I with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt alround earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40x40x6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20mm dia with funnel and wire mesh, and 40mm dia GI light grade lead protection pipe, complete all as specified and directed.

Description same all as per item No 20.00 here in before but using galvanised earth lead wire 4.0 mm dia earthing lead.

Supply and fixing cable path indicator made out of 300mm x 300mm x 1.6mm thick mild sheet duly rivetteed and welded to 600mm long mild steeel angle iron of 30mmx30mmx5mm and embedded in PCC 1:3:6 type C2 block of size 300mm x 300mm x 300mm including necessary excavation and earth work and painting exposed surface of steel work two coats of synthemertic enamelled paint over a coat of red oxide primer and marking the size of cable and voltage complete all as specified and directed.

Supply,installation, commissioning and testing, LT out door type LT panel board (in repair) of size not less than 1200mmx1000mm x 600mm, (CPRI Approved) kiosk type factory assembled fabricated out of suitable size angle iron, channel and MS sheet 3.00 mm thick (Inner compartment is 2.0 mm thick), double door type, front and rear openable with locking arrangement, duly powder coated painted with locking arrangement and independently housing for each control switch gear duly prewired with colour coading for three phasres and neytral, for 415 volts, 50 Hz electric supply with and including suitable sizes of cable glands for incoming and outgoing cables, grouting the panel board on and including suitable size foundation structure made out if equale angle iron as mentioned mentioned below installation, comissioning and testing complete with the following switch gears/ accessories. Make of MCCB:- Havells, L&T, Legrand. Make of Panel:- Universal switch gear control, M/S Power control and equipment, Power care Jabalpur. (a) MCCB 250 Amps 4 pole fixed type 36KA 415 volts (incoming) -01 No (b) MCCB 160 Amps 4 pole, fixed type, 25KA 415 volts (out going) - 04 Nos (c) MCCB TPN 100 Amps 3 phase and neutral-03 No (d) MCB TPN 63 Amps 3 phase and neutral -03 No. (e) Aluminium Bus bar of capacity 600 Amps 3 phase and neutral-1 Set. (f) Digital type voltmeter 0-500 volts. (g) Digital type Ammeter with CT of suitable ratio for reading upto 400 Amps load-01 NO. (g) Indicating lamps R, Y & B -01 set.

m/s bansal construction

AGARWAL BUILDERS

GUPTA ENGINEERING WORKS

POONAM ELECTRIC INDUSTRY

ms shrilaxminarayan and sons

Electromech Engineers