Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC 403 GH MANSADEVI COMPLEX PANCHKULA 134109 HARYANA | PANCHKULA | HARYANA | 134109 | ₹23.3 L Quoted ₹23.7 L | L1 | Accepted-AOC Being lowest |
| 2 | L2₹28.5 LRejected-Finance | ₹28.5 L | L2 | Rejected-Finance Other than L1 |
| 3 | Rejected-Technical HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD PIN 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | - | - | Rejected-Technical Not recommended since the firm is not enlisted in requisite category of work i.e. c v |
| Sl No | Description | Qty | Unit | Intrernational Engineers L2 | EESSI L1 |
|---|---|---|---|---|---|
| 1.00 | Dismantling/strip opening of primary chamber, burner and other connected accessories and servicing/overhauling of static hearth primary chamber lined with refractory insulation brick of IS-2042 standard having standard operating temperature 800+50 degree centigrade with temp.resistance 1400 degree centigrade of oil fired Incinerator.
Note:-Spares parts measured ad paid separately in respective items here in after. | 1 | Each job | 25,000 ₹25,000 | 20,000 ₹20,000 |
| 1.01 | Supply only Nozzle suitable for primary chamber of incinerator of capacity 50 Kg. | 2 | Each | 1,800 ₹3,600 | 2,000 ₹4,000 |
| 1.02 | Supply only Fuel pump suitable for primary chamber of incinerator of capacity 50 Kg. | 1 | Each | 15,000 ₹15,000 | 9,000 ₹9,000 |
| 1.03 | Supply only Pressure gauge suitable primary chamber of incinerator of capacity 50 Kg. | 2 | Each | 2,500 ₹5,000 | 2,000 ₹4,000 |
| 1.04 | Supply only Photo cell suitable primary chamber of incinerator of capacity 50 Kg. | 1 | Each | 1,950 ₹1,950 | 2,000 ₹2,000 |
| 1.05 | Supply only diesel filter suitable for primary chamber of incinerator of capacity 50 Kg. | 2 | Each | 1,950 ₹3,900 | 100 ₹200 |
| 1.06 | Supply only Flexible hose pipe suitable for primary chamber of incinerator of capacity 50 Kg. | 2 | Each | 1,850 ₹3,700 | 1,600 ₹3,200 |
| 1.07 | Supply only Inlet oil valve of 1/2" suitable for primary chamber of incinerator of capacity 50 Kg. | 1 | Each | 1,850 ₹1,850 | 1,000 ₹1,000 |
| 1.08 | Supply only Sequence controller suitable for primary chamber of incinerator of capacity 50 Kg. | 1 | Each | 2,500 ₹2,500 | 2,000 ₹2,000 |
| 1.09 | Supply only H T wire suitable for incinerator of primary chamber of incinerator of capacity 50 Kg. | 1 | Set | 2,400 ₹2,400 | 2,000 ₹2,000 |
Updated dates
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Nov 2025, 6:00 pmClosed
CWE, HQ 138 WE
CWE, HQ 138 WE
REPAIR/ MAINT AND SERVICING OF OIL FIRED INCINERATOR, HOT STEAM GENERATOR AND OTHER CONNECTED EQUIPMENT UNDER AGE E/M-II OF GE 865 EWS
2025_MES_732187_2
138WE/L-183/2025-26
Open Tender
Civil Works
270 days
GE 865 EWS
As per tender documents
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹90,000
Yes
9 Jan 2026
7 Nov 2025
5 Dec 2025
7 Nov 2025
28 Nov 2025
14 Nov 2025
Amount
Dismantling/strip opening of primary chamber, burner and other connected accessories and servicing/overhauling of static hearth primary chamber lined with refractory insulation brick of IS-2042 standard having standard operating temperature 800+50 degree centigrade with temp.resistance 1400 degree centigrade of oil fired Incinerator. Note:-Spares parts measured ad paid separately in respective items here in after.
Supply only Nozzle suitable for primary chamber of incinerator of capacity 50 Kg.
Supply only Fuel pump suitable for primary chamber of incinerator of capacity 50 Kg.
Supply only Pressure gauge suitable primary chamber of incinerator of capacity 50 Kg.
Supply only Photo cell suitable primary chamber of incinerator of capacity 50 Kg.
Supply only diesel filter suitable for primary chamber of incinerator of capacity 50 Kg.
Supply only Flexible hose pipe suitable for primary chamber of incinerator of capacity 50 Kg.
Supply only Inlet oil valve of 1/2" suitable for primary chamber of incinerator of capacity 50 Kg.
Supply only Sequence controller suitable for primary chamber of incinerator of capacity 50 Kg.
Supply only H T wire suitable for incinerator of primary chamber of incinerator of capacity 50 Kg.
Dismantling/strip opening of secondary chamber, burner and other connected accessories and servicing/overhauling of static hearth primary chamber lined with refractory insulation brick of IS 2042,minimum 115 mm thickness having standard operating temperature 1050+50 degree centigrade with temp.resistance 1400 degree centigrade including replacement of following unsv/damaged parts:
Supply only Nozzle suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only Fuel pump suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only Pressure gauge suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only Photo cell suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only diesel filter suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only Flexible hose pipe suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only Inlet oil valve of 1/2" suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only Sequence controller suitable for secondary chamber of incinerator of capacity 50 Kg.
Supply only H T wire suitable for secondary chamber of incinerator of capacity 50 Kg.
M&L for replacement of gasket for manual feeding door and ash removal door of Incinerator complete all as specified and/or as directed by Engr in Charge.
Disconnecting unsv I D (Induced draft) fan and servicing/overhauling, oiling and greasing of I D fan including replacement of all bearings complete all as specified and/or as directed by Engr in Charge.
Disconnecting F D (forced draft) fan damper and servicing/overhauling of F D fan damper including refixing to its original position complete all as specified and/or as directed by Engr in Charge.
S&F in replacement of temperature controlling rod 18" suitable for incinerator ,Make THERMAX , model no FRVS-75 complete all as specified and/or as directed by Engr in Charge.
S&F in replacement temperature controlling rod 6" suitable for incinerator ,Make THERMAX , model no FRVS-75 complete all as specified and/or as directed by Engr in Charge.
S&F in replacement ID ( Induced forced) fan impeller as existing , made out of Stainless steel complete all as specified and/or as directed by Engr in Charge.
S&F in replacement touch screen HDMI suitable for incinerator ,Make THERMAX , model no FRVS-75 complete all as specified and/or as directed by Engr in Charge.
S&F in replacement PLC input and out device suitable for incinerator ,Make THERMAX , model no FRVS-75 complete all as specified and/or as directed by Engr in Charge.
S&F temperature card for PLC input and out device suitable for incinerator. Make THERMAX , model no FRVS-75.
S&F in replacement refractory material inside manual cover complete all as specified and/or as directed by Engr in Charge.
M&L for painting of incinerator chimney of existing height by scraping out side surface area of chimney and applying one coat of red oxide, two coat of synthetic enamelled silver spray paint. Scaffolding required for chimney painting to be arranged by the contractor without any extra cost. If any gas welding is required at the time of chimney maintenance it will also be arranged by the contractor without any extra cost complete all as specified and/or as directed by Engr in Charge.
Dismantling of complete unserviceable burner assembly from secondary chamber and replacing the same by new incinerator burner assembly suitable for Make THARMAX model No FRVX-75 of burning capacity 55-60 kg /Hr and testing after completion complete all as specified and/or as directed by Engr in Charge.
S&F in replacement relay of make ABB Model No T25DU or equivalent completion complete all as specified and directed by Engr-in Charge.
S&F in replacement contactor of make ABB Model No B9-30-10 completion complete all as specified and directed by Engr-in Charge.
S&F in replacement V-belt size B-81. Make : Fenner/Navyug/Dunlop completion complete all as specified and directed by Engr-in Charge.
Supply, connection and testing of thermal heater wires on water supply pipe lines (GI/MS/PPR) FOR HEATING OF WATER THROUGH MINIMUM 25 Watt per meter in spiral/ straight line shape above outer diameter of pipe with aluminium tape insulation to preserve heat, fiber glass layer, second layer of aluminium tap to hold fiber glass by glass wool minimum 40mm thick with essential tapes, complete all as specified and directed by Engr-in-Charge.
Disconnecting electrical connection and water connection of steam boiler 600 kg model VE 80600KG make Vishal Energy and dismantling the same for repairs by removing nuts & bolts, front door including fitting and taking out old defective/unsv parts, cleaning, servicing, oiling and greasing of all moveable parts and replacement of gasket and packing set of chamber and testing on completion. Note: spare parts shall be measure and paid separately under respective items here in after.
Supply only optimizer as per existing model and capacity.
Supply only Economizer as per existing model and capacity.
Supply only burner rod as per existing model and capacity.
Supply only oil filter as per existing model and capacity.
Supply only filter element as per existing model and capacity.
Supply only multiport valve of size 40mm Dia Make-Sant/Kartar/ Thermax
Supply only crystal salt suitable for water Softening plant.
Supply only metallic Hose pipe of size 1” of 30” long
Supply only pump seal for boilers size 50mm Bore.
Supply only Softening compound (Chemical Resin T-40 NA) for removal Of iron, calcium and magnesium from water to avoid scaling inside hot water pipe line.
Supply only burner nozzle 6.0GPH .Make : Danfoss.
Supply only steam coil suitable for the steam boiler 600 Kg. Make : Superfab/Thermax/fabtech/Maxima
Supply only piston(HTN-1)
Supply only photocell 8203
Supply only pressure switch PM1.
Supply only flame coke
Supply and fixing triplex pump Set 3 HP capacity for Boiler.
S&F in replacement rope non-Asbestos best quality complete all as specified and directed.
S&F in replacement digital temperature ammeter range 0ºC to 250ºC Make : Nutronic.
S&F in replacement inner jacket suitable for the 600kg/hr steam boiler. Make: Maxima/Thermax/Fabtech
Opening dismantling and disconnecting all water connection and electrical connection of washer extractor capacity 30Kg make SUPERFAB and reassemble the same for repair after removing nuts and bolts including oiling, greasing and alignment of inner basket, alignment of shaft, pulley alignment, contract set of contractor cleaning, servicing and cleaning of pneumatic kits, air filter cleaning, cleaning the drain system and turning work and reassembling the same and testing on completion. Note: spare parts shall be measure and paid separately under appropriate items.
Supply only touch screen for any Size/washer extractor machine as per existing Make : Kinco/Fabtech/Fabcare
Supply only V belt Size B-56. Make : Fenner/ Navyug/Dunlop
Supply only V-belt size B-96. Make : Fenner/ Navyug/Dunlop.
Supply only angle steam valve
Supply only bearing 6313 (2RS) for AWX-30Kg
Supply only bearing 6314 (2RS) Make : SKF/NTN/NBC
Supply only steam solenoid valve For washer extractor 230 volts AC. Make:Falcon/Techno.
Supply only water solenoid valve For extractor 30kg 230volts AC. Make : Flacon/Techno.
Opening dismantling and disconnecting all water connection and electrical connection of drying tumbler capacity of 30 Kg make SUPERFAB and reassemble the same for repair after removing nuts and bolts including Oiling, cleaning, servicing and greasing, balancing and alignment of cylindrical basket, balancing of blower, shaft turning, cleaning and servicing of steam radiator for the smooth functioning of the machine all as directed. Note: spare parts shall be measure and paid separately under appropriate items.
Supply only V-belt size B-72. Make : Fenner/Navyug/Dunlop.
Supply only V-belt size A-68. Make : Fenner/Navyug/Dunlop.
Supply only contractor 25 Amp normally open normally closed with NC-Block. Make: BCH
Supply only indicator with lamp complete Make : Vaishno/BCH/Caltron
Supply only limit switch for auto door closer & opener. Make : Vaishno/BCH/Caltron
Supply only time switch reversing type 20-5-25 size. Make : Paracon/L&T/Havelles
Supply only steam stop valve 20 mm bore. Make : Sant/Leader/Jelpec
Supply only steam stop valve 15mm bore. Make : Sant/Leader/jelpec
Supply only steam coil set suitable for Air solenoid valve. Make-Akari/ Jelpec/ Janatics
Supply only push button for on/off . Make : Vaishno/ Bharat Bijlee/ABB
Supply only over load relay 2.5to 4 Amps. Make : L & T/Seimens/GE
Supply only ball bearing for both side of Calendaring drum bearing 6264-02Nos Make : NBC/SKF/ZKL
Supply only ball bearing for both sides of Calendaring drum bearing 6217-02Nos Make : NBC/SKF/ZKL
Disconnecting all electrical connection, water connection, connected M.S. pipe line and other items of water softener plant and dismantling the multiport valve, resin tank, water circulator pump, MS pipe line and taking down all defective parts including in replacement of old/ unserviceable spare parts and as under mentioned and re-assembling, commissioning & testing of Water softer.
Supply only Multi port valves
Supply only M.S pipeline 25 mm
Supply only Water circulating pump
Supply only Resin tank 250 x 1150 mm
Supply only Ejector white
M&L for repair of Flat work Drying ironer heated chest type double roll make SUPERFAB of Laundry Plant by opening dismantling steam connection , air connection and electrical connection for repair to chest alignment, Roller alignment , Chest turning work , polishing and replacement of following spare parts: (a) Steel wool padding (b) Outer cloth cover for roller (c) Emery Paper sheet for duffel roller (d) Canvas conveyer Belts of existing sizes - 16 Nos (e) Blower bush (f) Cylinder kit set (g) pneumatic air solenoid 4” x11/16” For pneumatic cylinder for lifting of chest. Make : Britch/konark/Jelpec Make: Superfab/Fabtech Engineering/NAT Steel Equipment
Opening dismantling and disconnecting all water connection and electrical connection of old type Washer Extractor capacity 30 Kg and reassemble the same for repair after removing nuts and bolts including oiling, greasing and alignment of inner basket, alignment of shaft, pulley alignment, cleaning the drain system and turning work and reassembling the same and testing on completion. Note: spare parts shall be measure and paid separately under respective items here in after.
Supply only V-belt size B-100. Make : Fenner/Navyug/Dunlop.
Supply only V-belt size B-63. Make : Fenner/Navyug/Dunlop.
Supply only pressure switch
Supply only air solenoid valve
Supply only Flow control valve
Disconnecting all electrical connection of the air compressor and taking out cylinder from the compressor and repair the same with replacement of Engine oil, key of shaft and re-fixing the same Including testing complete all as specified and directed by engr-in-charge.
Supply only Water solenoid motorized Pneumatic valve 4” of outlet. Make: Sant/Kartar/SK
Supply only water solenoid motorized pneumatic valve 2” of inlet. Make: Sant/kartar/SK
Supply only V-belt size B-81. Make : Fenner/Navyug/Dunlop.
S&F in replacement of angle valve pneumatic 1”. Make: Jelpec/Janatics/Akari
S&F in replacement of angle valve pneumatic ¾”. Make: Jelpec/Janatics/Akari.
Disconnecting the electric induction motor 2HP Capacity from the existing machine of any size and taking out the unserviceable winding wire complete and Cleaning the slots, rewinding the motor with Super enamelled copper windings wire of existing Gauge including all other insulating material of the following capacity : of any make and re-fixing the same after repair of existing machine Including testing complete all as specified and directed by Engr-in-Charge.
All as per Ser Item No 32 above, but Induction motor 5 HP capacity
All as per Ser Item No 32 above, but Induction motor 10 HP Capacity
Supply only contractor coil 240 voltage 32 Amps. Make : L &T/Siemens/GE
S&F in replacement of MCB 63 Amp x 4 Pole, 16 KA. Make : havells/L&T/Siemens
S&F in replacement of MCB 25 Amp x 4 Pole, 16 KA. Make : havells/L&T/Siemens
S&F in replacement of iron steam resting pad Make : Fabcare/Fabtech
S&F in replacement of MPD for Drying tumbler
S&F in replacement of main door rubber gasket For washer extractor 30 Kg.
S&F flexible air pipe 08 mm bore100mm long as per sample.
S&F flexible air pipe 15mm bore550mm long as per sample
S&F in replacement of Air regulator filter 15mm dia (0.5" BSP) for up to air connection at 5.7 Kg/Cm2 Make-Jelpec/Janatics/Akari
S&F in replacement of Contact set for Drive Contractor Make-L&T/Siemens/BCH
S&F in replacement of Contact set for Idler Contractor Make-L&T/Siemens/BCH
S&F in replacement of Terminal block Make-L&T/Siemens/BCH
S&F in replacement of final cover of vaccum finishing table for linen pressing Make-Fabcare/Fabtech/Super shine
S&F solenoid valve coil for steam/ Water solenoid valve. Make : Akari/Jelpec/Janatics.
S&F in replacement of trolley wheel Swivelling type ball bearing suitable for Mech. Laundry plant of size 6” dia Make : Senson/Satyam/Rollin.
S&F in replacement of MPD for Flat work Ironer Make : Softhard/fabcare/Fabtech
S&F gate lock assembly suitable for washer Extractor capacity 30Kg make SUPERFAB.
S&F solenoid valve for controlling Water drain pipe 220ltr for 50/30kg W/E Make : Vaishno/BCH/Caltron.
S&F over load relay 10 to 15 Amps Make : L & T/Siemens/GE
S&F gear ring set comprising of Gear ring of size 20”x2 ½ and 4”x 2 ½ Each suitable for flat work ironer. Make : SUPERFAB.
S&F in replacement of electric convector Heat Panel with over heat protection thermostatically controlled ,detachable wall mounting bracket, digital LED display, digital room temp sensor, totally silent operations of heater & thermostat of size width 1200 mm height 450 mm depth 90 mm of rated capacity 2600 watts 230 volts 50 Hz complete with all other accessories, complete all as specified and/or as directed by Engr in Charge.
Intrernational Engineers (BID ID -3474561)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_827184.xls
BOQ • 0.80 MB
TenderL18325262ndCall.pdf
Tender Documents • 1.13 MB
Download all tender documents and submit your bid