Special repairs to building Nos. P-51, P-51/A, P-52, P-52/A and P-34/35 at Mil Stn Bhusawal under GE(S) Ahmednagar

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed

Demoltion of brickwork or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars, etc. all as specified and as directed

Dismantling timber scantlings 40 Sqcm and over in section, in any position, unframed work, complete all as specified and as directed.

Taking down chowkats or frames area exc 1.5 Sqm and not exc 4 Sqm each with shutters without taking off shutters from the frame all as specified and as directed.

Taking down chowkats or frames area not exc 1.5 Sqm each with shutters without taking off shutters from the frame all as specified and as directed.

Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and as directed.

Demolition of Stone slabs like marble, granite & chequered cement tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing the rubbish off the premises complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and as directed.

Demolition and breaking up drain pipes 150 mm bore (salt glazed ware, AC or reinforced concrete) set in cement mortar all as specified and as directed.

Excavation in trenches not exc 1.5 m deep and not exc 1.5 in width for foundation etc or for shafts,wells etc not exc 10Sqm on plan and n exc 1.50m in depth and getting out in hard/dense soil all as specified and as directed.

Returning filling in (soil), including spreading, levelling, watering and well ramming in layers n exc 25cm thick all as specified and as directed.

Removing excavated soil to distance n.exc 50 m and depositing where directed at a level n exc 1.5m above the starting point all as specified and as directed.

M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and as directed.

M&L for PCC 1:3:6, type C1, using 20 mm graded stone aggregate as infixing of hold fasts, benching etc all as specified and as directed.

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in copings including necessary formwork etc all as specified and as directed.

M&L for precast RCC 1:2:4, type B-1, using 20mm graded stone aggregates in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.

M&L for brickwork with old size, subclass ‘B’ bricks, straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L for second class hard wood scantling, wrought and fixed in position complete all as specified and as directed.

M&L for second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed all as specified and as directed

M&L for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

M&L for 30 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats all as specified and as directed.

M&L for 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and fixed all as specified and as directed

M&L for 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and as directed.

M&L for solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and as directed.

S&F butt hinges, medium weight, cold rolled mild steel, 75 mm size and fixed all as specified and as directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100 mm size and fixed all as specified and as directed.

S&F aluminium anodised, barrel tower bolts of extruded section 100 mm size and fixed all as specified and as directed.

S&F aluminium anodised, barrel tower bolts of extruded section 200 mm size and fixed all as specified and as directed.

S&F axtruded aluminium alloy handles 100 mm size, fabricated type, anodised all as specified and as directed.

S&F extruded aluminium alloy handles 150 mm size, fabricated type, anodised

S&F 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flap when open 40 mm all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 300 mm size and fixed all as specified and as directed.

S&F double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed.

Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S&F mild steel work as in wind ties for roof including securing bolts complete including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F mild steel work as in small articles such as holdfasts etc all as specified and as directed

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed

S&F framed mild steel work as in doors or gates of angle or other section with gusset plates, rails braces etc complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and as directed.

S&F anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ Sqm including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

M&L in repairs for anodised aluminium snap grid framework for false ceiling, size of grid 605 x 605 mm, including 4mm dia GI wire hangers at 1.2m centres, 4mm thick, non asbestos fibre cement building boards (decorative type), fixed or laid/ inserted to aluminium framework/grid, preparation of surfaces of ceiling borards and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws as specified colour and design as approved by GE complete all as specified and directed.

S&F 12 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and as directed.

S&F block board, 18/19 mm thick, grade 1 quality, exterior grade, commercial type fixed with screws as in cupboard shutters all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 75 mm thick, PCC 1:2:4, type C2 using 40 mm graded stone aggregate finished even and fair as in paths including necessary formwork all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4, type C1, using 20 mm graded stone aggregate, finished even and smooth using extra cement all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles(shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 350mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for 20mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed. (The shade of granite shall be as approved by Engineer-in Charge.)

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No. 63 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including10 mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.

M&L for chequered cement concrete tiles, 20 cm x 20 cm x 25 mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry as in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed..

M&L for 10mm thick rendering cement mortar 1:6, on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for 15 mm thick rendering cement mortar 1:4, on fair faces of brickwork finished even and fair all as specified and as directed

M&L for reparing new plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting all as specified and as directed.

M&L for preparing new plastered wall surfaces and applying two coats of cement based paint all as specified and as directed.

M&L for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed.

M&L for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials and treating ends of posts,backs of chowkats, etc., area tarred exc 0.1 Sq m but n exc 0.5 Sqm each and treated with tar or coal tar black paint all as specified and as directed

M&L for preparing surfaces of steel and iron surfaces and treating small articles such as hold fasts, area tarred not exc 0.1 Sqm each and treated with tar or coal tar black paint all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint

M&L for sanding to newly tarred surfaces with clean sharp sand all as specified and as directed.

M&L for preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for preparing new steel or iron surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade', with and including all fittings; laid in trenches fixed complete to walls or laid in floors all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade', with and including all fittings; laid in trenches fixed complete to walls or laid in floors all as specified and as directed.

S&F 25 mm bore galvanised iron tubes, 'medium grade',with and including all fittings; laid in trenches fixed complete to walls or laid in floors

Refixing old 15 mm bore galvanised steel tubing and connections in new or old position, with and including all fittings; laid in trenches fixed complete to walls or laid in floors all as specified and as directed.

Refixing old 20 mm bore galvanised steel tubing and connections in new or old position, with and including all fittings; laid in trenches fixed complete to walls or laid in floors all as specified and as directed.

Refixing old steel tubing and connections in new or old position, 25 mm bore galvanised, with all fitting; laid in trenches fixed complete to walls or laid in floors all as specified and as directed.

S&F in repairs 15 mm bore bib taps, fancy type, brass chromium plated, , screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F in repairs 15 mm bore stop valves, fancy type, brass chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed all as specified and as directed.

S&F in repairs 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and as directed.

S&F in repairs, health faucet (hand shower) with 1.2 metre long PVC tube and wall hook all as specified and as directed. Make : Model No. ALD-563 of Jaquar or equivalent model of Kolher/ Prayag/Johnson/Plumber

S&F PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed.

S&F in repairs Vitreous china wash down water closet (Pedestal pattern) 'P' or 'S' trap complete, white including 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet, ball valve, float, handle, brackets and plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and as directed.

S&F in repairs vitreous china squatting pan 'Orissa pattern' , size 580 x440 mm, white with integral foot rest including 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet, ball valve, float, handle, bracketsall as specified and as directed.

S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers including wastes, 40mm dia waste coupling, PVC waste pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

S&F soap dish, vitreous China, white, approximate size 160mm x 160mm x 90mm all as specified and as directed.

S&F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.

S&F in repairs, PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F in repairs, PVC (SWR) bends any radius, 110 mm bore with oval access door all as specified and as directed.

S&F in repairs, PVC (SWR) bends any radius, 110 mm bore all as specified and as directed.

S&F in repairs, PVC (SWR) branch piece, single (single Y) equal or unequal, 110 mm bore with oval access door

S&F in repairs, PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F in repairs, PVC (SWR) bends any radius, 75 mm bore all as specified and as directed.

S&F in repairs, PVC (SWR) branch piece, single (single Y) equal or unequal, 75 mm bore with oval access door all as specified and as directed.

M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in concrete bed to drain pipes for 150 mm bore pipe including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for 150 mm bore salt glazed stone ware drain pipes, laid in trenches and jointed all as specified and as directed.

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding light fittings and DBs but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed sufaces of wall complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded copper conductor cable, conforming to IS-694 1990, single core, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams including 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards or wooden boards with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator, accessories etc for one light or fan point controlled by one, one way swtich all as specified and as directed.

All as per Item No 110 but for one modular switch socket out let 3 pin, 6 Amps point on independent board.

All as per Item No 110 but one modular switch socket outlet 3 pin, 6 Amps point with other switches on same board complete all as specified and as directed.

All as per Item No 110 but one bell/buzzer point controlled by one bell push complete all as specified and as directed.

All as per item No. 110 but with 4 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15/16 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.

M & L for sub main wiring with 1100 Volts grade single core FRLS/HRFR PVC insulated and unsheathed cable with stranded copper conductor 2x6.0 Sqmm drawn in and including electrical grade PVC conduct/ casing capping not less than 20 mm dia and medium grade marked alongwith accessories on surface of wall/ceiling, 1x6 Sqmm FRLS/HRFR PVC insulated unsheathed single core copper conductor cable as earth continuty conductor including taking down old submain wiring and making good the disturbed surfaces complete all as specified and as directed. Note : Three runs of 6 Sqmm cable and one run of PVC conduit/casing capping will be measured as one Rm unit.

S&F Switch piano, flush type , single pole , one way , 6 Amps, complete all as specified and as directed.

S&F modular switches, single pole , one way , 6 Amps, complete incl modular box and plate with frame complete all as specified and as directed.

S&F Switch socket combination, 2/3 pin, 6 Amps, flush type 230 volts, AC complete with box all as specified & as directed.

S & F modular Switch socket combination,2/3 pin, 6 Amps, 2 module type,230 volts, AC complete with modular metal flush box and plate with frame all as specified & as directed.

S & F Switch socket combination, 2/3 pin, 6 Amps and 16 Amps, flush type 230 volts, AC complete with box all as specified & as directed.

S & F modular switch socket combination, 6 pin, 16 Amps, 3 module type 230 volts, AC complete with modular metal flush box and plate all as specified & as directed.

S & F Call bell, 'Ding-dong' type, AC, 230 volts, single pole complete all as specified and as directed.

S & F Bell push button, flush type, 5 Amps, 250 volts, AC complete all as specified and as directed.

S & F modular Bell push 6A, 1 module 230 volts, AC complete incl boxes and plate all as specified and as directed.

S & F ceiling rose surface bakelite, 15x50 mm 2 to 3 terminals, PVC/Polycarbonate isolated body, 5 amps complete all as specified and as directed.

S & F in repairs, LED Endura citylite 25W for building Security lights with pressure die cast aluminum luminaire with high power LED and IP 65 protection and including mounting GI bracket made out 25 mm dia GI pipe light grade 1.2 mtr long bent to shape as required with flat iron clamps, nuts, bolts etc complete all as specified and as directed. Make : Havells/Philips / GE/ Crompton/ Halonix/ Century LED/Luker

S&F in repairs, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, energy efficient 20W LED 6000K, batten fitting with integrated electronic driver incl 2 Nos PVC round/square box complete with all accessories internally pre-wired and connecting up with twin core twisted flexible copper conductors of suitable size complete as specified and as directed. Make : Havells cat No LHEXBLP7PN1W020 or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker

S&F in repairs, surface and wall mounted 10W LED batten fittings complete incl connecting up with twin core twisted flexible copper conductors of suitable size incl 2 Nos PVC round/square box complete as specified and as directed. Make : Bajaj cat No BCLSB10NW or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker/Havells

S&F, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB capacity 20 Amps all as specified and as directed.

S&F sheet metal enclosures vertical DB, double door (VTPN) factory made having provision for FP MCCB upto 125 Amp as incomer, 415 volts, three phase and neutral 4 way with 200 amps rated bus bar, complete all as specified and directed.

S&F in repair MCB single pole 240 volt 6 to 32 Amps 10 KA and upto 40A complete all as specified and as directed.

S &F MCB, 100 Amps, 4 pole , 415 Volt , 25 KA complete all as specified and directed.

S&F in repairs, Trip plus LED square aesthetically designed recessed mounted panel in a light weight plastic body 22W LED 6000K (size 195mmx195mm ) incl connections from ceiling rose to light fittings complete all as specified and as directed. Make : Havells cat No LHEBGAP7IZ1W022 or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker/Bajaj

S&F in repair ceiling mounted decorative crysta COB swivel downlight with crisp light throw and high CRI 12W LED, 6500K spot light including its necessary connection complete all as specified and as directed. Make : Havells cat pat No LHEEGEPGIE1W012 or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker/Bajaj

S&F in repair decorative wall mounting , brushed nickel finish fixture with opal glass diffuser suitable with 9W lamp LED/7.5W LED filament lamp B22 base complete incl its necessary connection complete all as specified and as directed. Make : Havells cat part No LHFOAID1TZ1I040 or equivalent model of make Philips / GE/ Crompton/ Halonix/ Century LED/Luker/Bajaj

S&F ceiling electronic dimmers, 450W, 250V flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.

S&F modular fan step regulator , 120 W-2 module complete complete all as specified and as directed.

Bhirud Electric Stores

CHAUDHARY AND ASSOCIATES