REPAIRS TO CERTAIN PLUMBING, TILING, JOINERY, SANITARY, ROOF SHEETING, PLASTERING AND OTHER MISC WORKS TO OTM AND JCO/OR MD ACCN OF 114 INF BN (TA), 431(I) SUPPLY DEPOT, MES AND OTHER MINOR UNITS AT FATEHGARH CANTT.

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L for providing chequered cement concrete tiles of size 25cm x 25cm x 20mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick rendering in CM (1:4) on brick work concrete surface on wall and finished the even and fair to receive tiles complete all as spfd and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

S & F Vitrified Ceramic Tiles 10 mm thick (Square/rectangular) light shade polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in CM 1:6 complete all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 15mm thick cement plastering in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F Factory made Steel windows with side hung shutters including box type hinges with steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F Factory made Steel windows with side hung shutters including box type hinges with steel handle, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F Factory made Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M & L for framed work such as guard bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Factory made Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete complete all as specified and directed.

S&F Factory made Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for cement concrete C-0 type (1:3:6) ( using 12.5 mm graded broken stone aggregae) as in filling inside pressed steel chowkhats complete all as specified and directed.

S&F Factory made 32 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made 35 mm thick 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed.

S & F in repair curtain rod PVC coated mild steel rod 20 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

Taking down Aluminium door/ window with shutter of frame size n.exc 4.00 sqm complete all as specified and directed.

S & F Anodised aluminium frame work for door made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as hinges type 150 mm long (3 no.) suitable handle(2 No.), 150 mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified. Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium complete all as specified and directed.

S & F Anodised aluminium frame work for window/ventilator made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2 no.) suitable handle(1 No.), 100mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified. Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium complete all as specified and directed.

S&F sheet glass 5.5mm thick ordinary quality exc 0.5 sqm each all as specified and directed.

S&F Door closer hydraulically regulated,designation No. 2,aluminium die cast body universal type complete all as specified and directed.

M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

S&F sheet glass 5.5mm thick ordinary quality exc 0.5 sqm each all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) fixed complete all as specified and as directed.

S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover,hand shower including all fittings complete all as specified and as directed .

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutter of size 6mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel full body threaded star headed counter sunk S.S screws, complete all as specified and directed

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 12mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long as spd and fixed in repair complete all as specified and directed

S & F in repair internal fitting for flushing cistern (Kit) complete all as specified and directed

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks complete all as specified and directed

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed

M & L three coat of white wash on new plastered wall surfaces including preparation complete all as specified and directed

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of alkali resistant primer including preparation complete all as specified and directed

M & L three coat of white wash on new plastered Ceiling surfaces including preparation complete all as specified and directed

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

S&F in repair False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

M&L PCC type C-2 (1:3:6) (20mm stone graded aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed.

Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment , over 20 mm th sand filling complete all as specified and directed.

M/S S P CONSTRUCTION

M/s Moti Babu Agarwal