PROVN OF CERTAIN REVENUE AND MINOR WORKS IN AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store

S&F 15mm dia bore water tubing, medium grade, galvanised with all fitting laid in trenches/wall including taking down old pipe complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkhats or frame with shutters exc 1.5 Sqm and n exc 4.00 sqm ditto but with shutters (without taking off shutters from the frame)each complete all specified and directed.

S & F Anodised aluminium frame for doors, windows, ventilators, partations, AC provision window frame with or without three track, three track window frame etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Design and pattern for any type window/door/ventilator etc frame as required as approved by GE )

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M & L for fabrication and fixing 18 mm thick HDHMR Board prelaminated on one face and other face cover with decorative choice lamination sunmica, with edge bending tape (colour as approved by GE) other side white face, in Cupboard Shutters, sides, shelves,top and bottom with frame work etc including taking down old any type cupboards , shelves etc all as specified and directed.

S&F stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

S & F for Stainless steel thali/plate basket of size 445mm x 485mm x 150mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S&F Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3892, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including Glass / wiremesh anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 no.) suitable handle (1 No.) complete all as specified

M&L 4mm thick desginer false ceiling e-board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing old board (fibre pulp.insulation etc) or insulation boards/slabs/blanks any thickness including cover fillets etc complete all as specified and directed.

M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -12 mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 in floor or 10 mm thick rendering in CM 1:4 in skirting after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick avg screed bed in CM 1:6 and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L Coloured Glazed ceramic tiles size 600 x 300 x 7-8 mm thick, in vertical surface such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick rendering in CM 1:4 after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge.

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc/ Kohler)

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. (Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Marc/ Kohler)

S & F in repair CP shower rose fancy type 200mm x 200mm size with 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make :Jaquar or equivalent in Marc/ Kohler)

S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Marc/ Kohler)

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. SLS WHT 6851S300PP or equivalent in Hindware/Parryware/Cera)

S&F in repair PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repairs ready made wall / floor mounted Vanity box made of HDHMR board, both side laminated and front side melamine surface, consisting of the following combination :- (a) Wash Hand Basin 620 mm x 460 mm including brass waste cupling (b) Base Cabinet 585 mm x 445 mm x 480 mm. (Make : Hindware - DTC brand (Element Soft OAK color) or equivalent Bathsense of Asian Paint/ Cera)

S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete

S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. (Make: Jaquar/Marc/ Kohler)

S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed. (Make: Jaquar/Marc/ Kohler)

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repair 15mm bore angle stop valve chromium plated brass with flange complete all as spd & directed. (Make: Jaquar/Marc/ Kohler)

S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed. (Make: Jaquar/Marc/ Kohler)

S&F in repair corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd (Make: Jaquar/Marc/ Kohler)

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified (Make : Jaquar Cat part No. ALD-CHR-573 or equivalent in Marc/ Kohler)

S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete. (Make: Jaquar/Marc/ Kohler)

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in shaft area upto the 10 storey building also)

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed.

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.(Note : Pipe work executed in shaft area upto the 10 storey building also )

S & F repair 75 mm PVC (SWR) bends with acess door completed all as specified and directed

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair SS soap dish complete all as specified and as directed. (Make: Jaquar/Marc/ Kohler)

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil.

M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L Preparation of new Steel Surfaces Surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/ Dense Soil all as specified and complete

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and no pigment over and including 50 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 10 mm thick screed bed/rendering in CM 1:4 including rounding to edge of granite as per required after dismantling of existing granite of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S&F soft closing hinges to cupboard shutter etc. (Make: IPSA/Hettich/Godrej/Kaff)

Hardcore of gauge of broken bricks n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes, drain etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed by Engr-in- Charge.

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L Pre-painted galvalume aluminum zinc coating GI based Corrugated Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Mild Steel work in rafter , purlin, and other connected work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) FE-410 W GDE_250 Quality complete all as specified and directed

M&L for Pre Polished Cement Chequered Concrete Outdoor tiles 300x300 x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for two coats of Cement based paint over one coat of cement primer including preparation of new plastered surface complete all as specifed and directed

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

Demolition of Brickwork but built in Cement Mortar complete all as speicified and directed

Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Providing and fixing factory made uPVG white colour Sliding window Three track with provision of ac made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor Includes cost of glass 5.5mm and wire mesh and includes all other connected accessories. Net Opening will be measured payment purpose.)

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, 5.5 mm glass and wire mesh for panels complete all as specified and as directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. ( Glass/ ACP panel/ partical board paid separately)

S&F 12 mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with aluminium partition, door cupboad etc complete all as specified and directed

S & F 12 mm thick (toughened glass with frosted glass) of approved quality fixed in partation/door's/ Cubical for toilets etc including necessary all stainless steel hardware fittings (As like frame , brackets , clits ,channels , pintels, jammers, stopers, handels etc) complete drilled for fixing with all fitting and fixture including dismantled old glass any type complete all as specified and directed

S & F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specifed and directed.

M & L for preparation of of old/new plastered/unplastered surfaces applying wall care putty as required on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander etc and providing two coat of 1st quality acrylic emulsion (ready mixed) having VOC content less than 50 gms/litre over a coat of primer of approved manufacturer of required shade and colour complete, as per manufacturer's specification and using roller brush complete all as specified and directed by Engineer-in-Charge.

S&F Suspended Gypsum board ceiling works in decorative steps including vertical/sloping members includes with GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) alongwith perimeter of nailing screw fixed in brick wall/RCC with the help of nylon seelves and screws at 610mm centre, then suspending GI intermediate channels of size 45mm (0.9mm thick with two flange of 15mm each) from the soffits at 1220mm centre with GI cleat and steel expansion fasteners, ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres, 12.5mm tapered edge gypsum board conforing to IS 2095 (1982) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centre,. Screws fixing is done mechanically either with screw driver or drilling machine with suitable attachment finally the board are to be jointed and finishing the tapered and square edges of the boards are to be joints compound, joint fiber tape inclduing taking down existing down exisitng ceiling(Note :- Details of fixing & material will be got approved by GE before commencement of work).

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed .

M&L 12 mm thick white color GRG (Glass Fibre Reinforced Gypsum) Semi Perforated false Ceiling Tiles, Micro Tegular & Tegular edged, Size 595mm X 595mm, Fire Resistance BS-476-4:1970 (Certified), Humidity Resistance (RH) (Certified), including necessary GI frame/ GI T , Cross , wall angle etc false ceiling grid (Ceiling Suspension System) in High Quality Zinc Coated Galvanized Iron with Pre Painted Hot Pressed White G I Coil. including centre to centre Hangers 6 mm dia. G.I. rod fully threaded (upto 1000mm long) fixed to roof slabs with galvanised M-6 desh fastener 50 mm long including galvanised MS L-type level adjuster 85 x 25 x 25 x 2 mm etc including taking down on existing ceiling completed all as specified and directed. (Make:- Diamond ceiling or equivalent as approved by GE)

M&L for vitrified Ceramic tiles, double charged 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm x 1200mm), in floors etc. including dark and light shade combination design pattern in floor as approved by GE set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge complete.

M&L for Vitrified coloured ceramic tiles light shade 10mm thick (square/rectangular) polished, area ofeach tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed inwhite or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge complete.

M&L non-skid Color Ceramic tiles 7-8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge complete.

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design patern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L/U beading etc fixed with PVC sleeves and screws as required at site complete all as specified and as directed.

S&F magnetic catches for cupboard, shelves etc.

S&F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed.

S & F in repair Vitreous China Urinal, full stall type Urinal inlcuding CP urinal spreader With Fixing Accessories, white and fixed complete all as specified and directed. (Make : Jaquar cat part No URS-WHT-13261 or equivalent in Hindware/Parryware)

S&F in repair 15mm Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make : Jaqaur Cat Part No PRS-CHR-077 or equivalent in Marc/ Kohlar)

S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal with acess door etc completed all as specified and directed

S&F CP Plated Stainless Steel grating doom 100mm dia complete.

S&F in repair viterous china white soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.

S& F 75 mm PVC (SWR) junction single (Single T) equal or unequal with access door

Dismantling existing water tanks of capacity exc 500 Ltr & n. exc 1000 ltr any type and any position and removing to store complete all as specified.

S&F rotational moulded polythene, water storage tank Triple Layered 1000 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position complete all as specified and dirtected by Engr-in-Charge .

S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed.

S&F of RCC Precast Concrete Post (M-30) of size 150mm X 150mm X 2435mm height having two grooves of size 50 x 30mm, so as to receive 6 Nos. including Provn of 6 Nos of Precast concrete RCC Panels between Two post of size 1500mm X 300mm X 40mm thickness The post is reinforced with 4 Nos. 8mm dia Tor Bars with 4mm dia stir-ups @ 1.615m centre to centre150mm c/c; Panels are reinforced with 3 Nos. longitudinal bar of 8mm dia Tor steel & 6mm plain M.S Stir ups @ 150mm c/c. Manufactured by M-30 graded of concretes complete all as specifed and as directed. Note :- (a) Above ground level height will be measured for payment purpose. (b) Excavation of post holes for fixing of Columns shall be measured and paid seprately (c) The post may be fixed to the ground by digging a hole of 500 x500 x600mm and filled with 1:3:6 concrete (concrete shall be measured & paid separately) the post has been aligned in these holes. The post will be erected @ 1.615 m center to center. (Make- Kreative concrete company or equivalent as approved by GE).

S& F Roof Trusses frames, truseed purlins, crane gantries, rails nd fastening and heavy bracket framing (beam ,tee, angle channel , tubular sections made to shape as directed including distant pieces, cleats etc welding/joinitng with nuts and washer complete all as specified and directed

M&L for Providing, cement concrete 1:2:4 using 20mm graded stone aggregate as in copings, kneelers, apex stones, bed plates watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L cutting holes exc half bricks but not excd one brick thick in brick walls in but in brick wallsbuilt in cement mortar or for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4

PCC (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in brenching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed.

Dismantling of mild steel work of any description and in any position complete all as specified and directed.

S&F for 35 mm thickness flush shutters, solid core construction, with particle board core and plywood face panels both faces covered with decorative face veneer with lipping incl edge to match frame complete all as specified and directed.

S& F 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S& F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified and directed

M&L for Rubber Moulded Prepolished Chequered cementconcrete tiles 30cm x 30cm x 25mm thick, with grey pigment cement an pigments set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed.

Preparation of new Wooden Surfaces Surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S& F Aluminium Anodised Tower Bolt of 150mm complete all as specified and directed

S&F 150mm Size aluminium anodised handle complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.

S & F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; frames over chajjas, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

Applying two coats of oil bound distemper over a coat of interior primer on prepared surfaces of walls and ceiling surface complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall inclduing dismantling of the cement asbestos sheet fixed with self tapping screws as specified.

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per item No.113 here-in-before but one socket outlet point 5 amps on the same board.

All as per item No.113 here-in-before but one socket outet point 5 amps on the independent board.

All as per srl item No.113 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire independent board complete all as directed.

All as per item No.113 here-in-before but with 4.0 Sqmm cable for independent point and using 4.0 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed.

S&F in replacement modular switch flush type, 6 amps one way,SP,230 volts AC complete all as specified and directed.

S&F in replacement modular socket outlet 6 amps complete all as specified and directed.

S&F in replacement modular socket outlet 6 & 16 amps complete all as specified and directed.

S&F in replacement modular switch flush type, 16 amps one way,SP,230 volts AC complete all as specified and directed.

S & F in replacement of Ceiling rose, 3 terminal , pvc/polycabonate, isulated body all as specified and directed.

S&F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S&F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

S&F in replacement of Ventilating fan 250 mm sweep plastic body type including self cousing louver and making all electric connections complete all as specified and as directed.

Taking down of Exhaust fan any type size complete with blades, fan clamp etc and depositing to MES store yard after dismentling blade complete all as specified and as directed.

Supply and fixing exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

Taking down of geyser any type, size depositing to MES store yard complete all as specified and as directed.

S&F Geyser 50 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging all accessories such as safety valve, thermostat, NRV, inlet & outlet 304 grade stainless steel connection pipe with SS nut complete all as specifed and as directed.

S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F in repair Modular Metal Flush Box 6/8 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F in repair Modular white cover plate with frame 1 module all as directed

S&F in repair Modular white cover plate with frame 2 module all as directed

S&F in repair Modular white cover plate with frame 3 module all as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

S&F in repair Modular white cover plate with frame 8 module all as directed

Earthing complete with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers protected by and including 15 mm bore GI Pipe “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part –I including testing on completion complete all as specified and directed.

S & F Modular Fan regulator step type ,120 watts, complete all as directed.

S&F sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc and one run of 4 Sqmm FRLS PVC insulated copper conductor and making good to match with existing surfaces complete all as specified and as directed. Make :- Havells/ Note:- (Two run of cable along with one run of earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F sub main wiring with 2 runs of 10 Sqmm FR, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 25 mm dia, PVC rigid, non metallic conduit, medium grade inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc and one run of 10 Sqmm FR, PVC insulated copper conductor and making good to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with one run of earth conductor including PVC rigid conduit shall be measured as one RM length).

Supply and fixing LED luminaire 2'x2, 35/36 W ,220volt AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver ,holders & LED lamp suitable for roof etc as specified and directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

S&F in replacement of MCB DB conforming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar with connection complete all as directed.

S&F in replacement of isolator SPN 63Amp complete all as directed.

S&F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed.

Vipul Construction (BID ID -3274436)

THE LOTUS BUILDTECH (BID ID -3273899)

Akhil Enterprises (BID ID -3274383)

M/s Shubh Enterprises (BID ID -3277994)