Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹18.6 L
EMD Value
₹37,274
Closing Date
8 Dec 2026, 4:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Eastern Rivers Division, CWC
Plot No. A- 13 and 14, Bhoi Nagar, Vani Vihar, Bhubaneswar, Odisha, PIN- 751022
Construction of Parking Shed and Laying of Paver Blocks in the back side of Mahanadi Bhawan, MERO, CWC, Bhubaneswar
2026_CWC_930379_1
ERD/JE(HQ)/NIT/2026/2197-2210
Open Tender
Civil Works
Item Rate
90 days
Bhubaneswar
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Central Water Commission- DoWR- RD and GR
₹37,274
Yes
Bhubaneswar
17 Nov 2026
17 Nov 2026
9 Dec 2026
17 Nov 2026
8 Dec 2026
18 Nov 2026
21 Nov 2026
120 days
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1PARKING SHED | |||||
| 1.01 | Earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil. (Foundation of column footings) | 16.2 | Cum | - | - |
| 1.02 | Providing and laying in position cement concrete of specific grade excluding the cost of centering and shuttering - all works up to plinth level: 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size). (75 mm thick bottom layer of column footing) | 1.01 | Cum | - | - |
| 1.03 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering and reinforcement - all works up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (Column base 250 mm thick and 500 x 500 mm pedestal, M20) | 4.91 | Cum | - | - |
| 1.04 | Steel reinforcement for RCC work including straightening, cutting, bending and placing in position and binding all complete up to plinth level: thermo-mechanically treated bars of grade Fe-500D or more. | 222.6 | Kg | - | - |
| 1.05 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (Columns SHS 150x150x6.0, trusses, purlins RHS 122x61x5.4, eave girders SHS 100x100x4.0, tie runners, bracings and base plates, as per drawings) | 5,185.11 | Kg | - | - |
| 1.06 | Providing and fixing at all heights, levels and locations colour finish aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS 2676, with characteristics of good formability and corrosion resistance. Profile sheets to be fixed to truss members in slope or required pitch with hex cap headed self-drilling/ tapping stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer, all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-in-charge (cost of truss/ frame work paid separately). 0.56 mm aluminium colour coated troughed profile with centre to centre pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000 mm. | 215.51 | Sqm | - | - |
| 1.07 | Providing and fixing of pre-coated colour or mill finish aluminium roofing accessories in 0.71 mm thickness, alloy 31500 (IS designation) [aluminium alloy AA 3004 (ISO designation)]; coating of 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50 mm with 3 mm thick EPDM seal and SS plain washer complete: | - | - | - | - |
| 1.071 | (a) Pre-coated/ mill finish aluminium ridges plain (500-600 mm) | 15.3 | meter | - | - |
| 1.072 | (b) Pre-coated/ mill finish aluminium gutter (600 mm over all girth) | 47.8 | meter | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.59 MB
BOQ_977732.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .