Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest Tenderer | |
| 2 | L2₹37.9 L+₹6.5 L (20.8%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹38.4 L+₹7.0 L (22.4%)Rejected-Finance | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹42.9 L+₹11.6 L (37.0%)Rejected-Finance GANESH MURTHI NAGAR PART III GALI NO 01 ROOM NO 82 A CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹47.3 L+₹15.9 L (50.8%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹44.9 L
EMD Value
₹89,740
Closing Date
8 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIL KUMAR S GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8977 ADDITION/ALTERATION AND PROVISION OF TWO WASH ROOM ONE LADIES TOILET FOR WOMEN OFFICERS AND ONE COMMON TOILET FOR COMMAND MET OFFICE ADDITION ALTERATION TO OFFICE SPACES OF CQAE WS MUMBAI ADDITION ALTERATION OF REAR BOUNDARY P1 J WITH GATE, DG
2024_MES_646976_1
8977/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹89,740
Yes
9 May 2025
18 Mar 2024
10 Apr 2024
23 Mar 2024
8 Apr 2024
25 Mar 2024
18 Mar 2024 - 23 Mar 2024
Amount
Demolition of brick work or stone boulder masonry built in cement moratar including all quoins,arches,pillars,etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed .
M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.
M&L for Water proofing plaster 15 mm thick on Brick masonry surface or surface in 1:6 and finished even and smooth without using extra cement complete all as specified and directed . (Note : WPC shall be measured and paid seperately).
M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishingcoat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions including necessary scafolding for high rise bldgs etc all as specified and directed. (Note : WPC shall be measured and paid seperately).
Supply only integral water proofing compound complete all as specified and directed .
M &L for applying two coats of oil bound distemper over newly plastered surfaces of wall all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed ..
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat Chalk whiting, on plastered surfaces complete all as specified and directed .
M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed
M&L preparation of old decorated surfaces of walls, soffits, roof facia & applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified & directed.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (fittins shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dashfasteners of required dia and size including necessary filling up the gaps at junctions i,e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling CP brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed ..
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed .
S & F 100mm size Stainless steel butt hinges complete all as specified and directed .
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc complete all as specified and directed .
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed .
S&F in repairs 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified
S & F Aluminium extruded body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and ofweight not morethan 35 kg and fixed complete all as specified and directed .
S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed .
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed .
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed .
S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and directed .
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed .
M & L 4mm thick designed non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work complete all as specified and directed .
Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed .
M & L cutting openings through brick walls fpor door window and other openings or enlarging existing openings converting window into door openings etc or cutting out defective brick work for under pinning including providing fixing and removing shoring cleaning and staking bricks removing surplus serviceable bricks hard core etc to stone and rubbish not exc 50 mtr built in cement mortar complete all as specified and directed .
Steel work in tubular trusses 50 mm dia including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including all fastener for fixing purpose etc complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed .
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.
M&L for machine cut cudappa stone slab 20-25 mm thick fixed independently and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course complete all as specified and directed .
M&L for cement concrete 1:3:6 type C-1 , (20 mm graded stone agg) as in foundation filling, sub base ect etc all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc complete all as specified and as directed .
All as per item No. 41 but for 75 mm bore complete all as specified and as directed .
S & F PVC (SWR) vent cowl 110 mm complete all as specified and as directed .
All as per item No. 43 but for 75 mm bore complete all as specified and as directed .
M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement75 mm dia complete all as specified and as directed .
S&F in repairs 160mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :-Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.
S & F UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls,ceilings or in floors etc any type of pipe 15 mm bore complete all as specified and as directed .
All as per item No. 47 above but for but 20 mm bore complete all as specified and as directed .
S&F Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified and as directed .
S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed ..
S&F water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and as directed ..
Supply only PVC (SWR) 'P' trap 110mm dia complete all as specified and as directed .
S&F wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed .
S&F Corner type wash hand basin vitreous china white including bracket 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed .
S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) complete all as specified and as directed .
S&F fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and as directed .
S&F fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and as directed .
S&F stop valves/angle cock fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and as directed .
S & F Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed .
S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed .
S/F PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets complete all as specified and as directed .
S&F Soap dish any type fixed to plugs with chromium plated brass screws (Apprximate size 160x160x90mm) complete all as specified and as directed .
S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) complete all as specified and as directed in SSR Part I.
S&F rotational moulded polythylene water storage loft tank tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.
S&F health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed .
S&FCorner glass shelf with brackets complete all as specified and as directed .
S&F aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and as directed .
M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.
Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing complete all as specified and as directed .
M&L for RCC type B1 1:2:4 (20 mm graded agg) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed .
M& L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including suo supports, overhangs, etcalso splays between floors and beams etc flat surfaces complete all as specified and as directed .
S&F Mild steel TMT Bars epoxy coated 10mm dia and over, cut to length, bent to shape required, including cranking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia, or securing with clips complete all as specified and as directed .
All as per item No. 73 above but in stirrups complete all as specified and as directed .
M & L excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out hard/dense soil complete all as specified and as directed .
M&L for PCC 1:4:8 type D-2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed .
M&L for RCC (design mix), M-30 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed .
M&L for RCC (design mix), M-30 in Columns, pillars, piers, posts and struts etc complete all as specified and as directed .
M& L for form work to sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and soffits ( if any) of foundation and plinth beams; and similar work; vertical or to batter in flat surfaces complete all as specified and as directed .
M& for form work & props to Columns, pillars, piers, posts and struts etc in square, rectangular or polygonal surfaces complete all as specified and as directed .
M&L rendering 15mm thick in CM 1:4 on brick surfaces, finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather acrylic base paint (100 % acrylic) over one coat of cement based primer all as specified and as directed.
M&L for cement concrete type B1 1:2:4 (20 mm graded agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed .
S&F mild steel framed work such as grills, gratings,chequred plates etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
S&F galavanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specifed (each line wire to be measured)
S & F in repairs barbed razor type concertina coil, 9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm, zinc coating 250 to 300 gms/Sqm, dia of coil when un streched shall be 600 mm having minimum of coil (GI strip) 1.625 Kg/RM , hot dip galvanized razor ribbon tape of size .50 mm thickness, 19 mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips (minimum 25 Nos /RM ) and special nut and bolts to hold two coils together and extra rows paralled wire of 10 gauhe complete all as specified and as directed.
M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed .
M& L for 100mm thick PCC 1:4:8 type in foundation type D2 using 40mm graded granite stone aggregate as in subbase finished fair and even including necessary formwork complete all as specified and directed .
M & L 100 mm thick cement concrete type B2 1:2:4 (40 mm graded agg) including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed
S & F Rolled section Fe 410-W (Gde E-250 quality A) as in main and cross beams, hip and jack rafters; purlins, vertical post, plates, pipes where connected to common rafter and running rails and fixing with angle cleats or other connection plates also fixing wind tie bars etc. complete all as specified and directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M & L for prepartion of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise describe and applying two coat of synthetic enamal paint paint oner one coat of red oxide primer complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutter from frame) exc 1.5 sqm but n exc 4 sqm each complete all as secified.
Taking down cement plaster on brick/ surfaces built in cement mortar including raking out joints, bedding for key scrubbing down with water etc complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof covering complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410-W (Gde-E-250 quality-A) complete all as specified and directed.
S&F 1mm thick Plain, galvanised, mild steel sheeting in valley gutters, eaves, hips, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified & directed.
M&L preparation of newly plastered surfaces of wall, applying two coats of oil emulsion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and directed.
M&L for preparing old decorated plastered surfaces of walls by broming down or by steel wire brushing scrapping down smoke soot, moulds, moss and efflorescenet salts and trading oil and greasy spots and applying one coat of white wash complete all as specified & directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing unserviceable tiles, debris and rubbsh to a distance not exc 100m complete all specified and directed.
S&F Powder coated aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F 4mm thick bakelite with decorative choice laminated on both side completion as specified and as directed
Dismantling water tanks and exc 1000 litres & n exc 2000 litres capacity complete all as specified and directed.
S&F rotational moulded polythene water storage tank of 5000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed .
S&F PVC ball valve 20mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule and fixed in repairs complete all as specified and directed.
Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
All as per item No. 108 above but 20mm bore GI tubing complete all as specified and directed.
S&F 15mm dia medium grade galvanised steel tubing with all fittings like tee, bend, elbowetc, fixed to walls, ceilings or laid under floors. Complete all as specified and directed.
As per item No 110 above but for 20mm dia medium GI Pipe complete all as specified and directed.
Taking down eaves gutter ,PVC wastages and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, including cleaning or reflexing or removal to store etc complete all as specified and directed.
S&F 160mm dia PVC (SWR)grade double T/Y with access doos including fixing clips complete all as specified and directed.
All as per item No 113 above but for 110mm dia complete all as specified and directed.
Supply only waterproofing chemical pidiproof+ Dr Fixit or equivalent from list of manufactures.
S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with MS clamps complete all as specified and as directed .
S&F in repairs CI Bends100 mm bore (any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and as directed .
M&L for 100 mm Y Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches all as specified and directed.
S&F for 100 mm Cast iron cowls all as specified and directed.
M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc complete all as specified and directed.
M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed .
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
Demolition of cement concrete (reinforced) other than ground floor roof,floor ,beams,stair case,landing,chajja etc complete all as specified.
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed.
M&L for concealed point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC Conduit with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular box and cover plate all as specified.Notes: a) Colour coding shall be followed as given below:- i) Phase - Red ii) Neutral - Black iii) Earth - Green b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Benlo c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (a) (a) One light point point controlled by one 5A switch
All as per item No. 127 above but for One Fan point/Exhaust fan point controlled by one 5A switch
All as per item No. 127 above but for One 5A flush type switch socket point on same board board
All as per item No. 127 above but for One 5A flush type switch socket point on independent board
M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm PVC Conduit with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including required number and size of modular box with cover plate frame in any module complete necessary electric connection for each workstation point comprising of 02 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately.
S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.
S & F modular switch 1 way 6A all as specified and directed . .
S & F modular switch 1 way 16A all as specified and directed .
S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed .
S & F modular switch socket combination 16A,3 module all as specified and directed .
Disconnecting and taking down the fan and Overhauling of exhust fan any size and make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust, rust and applying two coat gray paint over a coat of steel primer, assembling and refixing at same position complete all as specified.
Supply and fixing in repair new generation walll/surface mounted 1x 20W LED batten fitting, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed . Make : Jaguarcat No LGLZ01x020XC or equivalent manufactures from list of manufactures
Supply and fixing in repair of LED 60W Street/building security light fittings with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed. Make : Jaguar cat No LSRT01S060XC or equivalent manufactures from list of manufactures
Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed.
M&L for concealed sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note (i) : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex Note(ii) : 2 runs of 6.0 Sqmm and one run of PVC conduit shall be measured as one unit
S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar, IP 54, IK 09 suitable for flush mounting and surface mounting complete all as specified and directed.
S & F MCB SP 6-32 Amps,10KA, 'C' curve complete all as specified and directed.
S & F MCB SP 40 Amps,10KA, 'C' curve complete all as specified and directed.
S & F TP 63 Amps,10KA , 'C' curve complete all as specified and directed.
Disconnecting, and refixing the DG set with Panel and from one location to other location with and including foundation of DG Set with all accessories and equipments complete all as specified and directed.
Supply and fixing in repair new generation LED Luminaire 20 watt, Batten fitting , high quality ecomonic energy saving light complete all as specified and directed.
M&L for sub-main wiring with 4 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note(i) : (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex note (ii) 4 runs of 10 Sqmm cable and one run of PVC conduit shall be measured as one unit
S&F in repair sheet metal enclosure TPN DB VTPN 6 Way,415V with 250A copper busbar, double door type IP-54, IK-09 protection suitable for housing MCCB 100Amp 4 pole incl required numbers of suitable size of gland complete etc all as specified and directed by EIC. Make: Siemens/Legrand /GE Note : DBs shall be conceeled in wall where ever posible including making good the surface to match with surrounding complete all as specified and directed.
S & F MCCB FP 125 Amps,16KA, thermal magnetic,415volts complete all as specified and directed. Make : Legrand cat No 420016 or equivalent make in list of makes
S & F MCB SPN 63 Amps,10KA , 'C' curve complete all as specified and directed.
S & F MCB SPN 40 Amps,10KA , 'C' curve complete all as specified and directed.
M&L for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified and directed.
Disconnecting & taking down old Unservicable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core complete all as specified and directed .
Disconnecting & taking down old Unservicable cable & Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified and directed
Supply of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
S& F GI cable tray perforated type 2 mm thick of size 250x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) , alloy 31000 H4 in ridges, Hips vally gutter cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories complete bending,shaping,drilling,welding, cutting & all fixing arrangement complete etc all as directed
M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:- One 5pin, 15 Amps switch socket combination on same board
M&L for submain wiring with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed. Note: 2 run of 4 Sqmm cable and one run of PVC conduit shall be measured as one unit
S&F LED recess mounted type fitting 36W 2'x2' CRCA LED Slim panel with recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified .
Supply and fix modular fan regulator electronic 2module 120W, 240 Volts AC complete all as directed and specified .
S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar complete all as directed and specified .
MADHU ENTERPRIZES
georson constructions
H R Enterprises
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .