REPAIR REPLACEMENT IMPROVEMENT OF LT ELECTRIC DISTRIBUTION SYSTEM AND APFC PANEL AND OTHER CONNECTED WORK AT MH GOLF VIEW AND NEARBY AREA AT UNDER GE MIS MHOW

Amount

Supply and fix in repair of all-in -one integrated solar street light 30 W compact,Asthetic, Ecofriendly & Modern integrated solar streetlight in extruded aluminium construction with high efficiency monocrystalline silicon photo voltaic panel,high efficacy SMD LED 6500 K having secondary lens optics for street lighting distribution,high performance lithium battery, MPPT charge controller and intelligent control module/sensor with higher reliability, long service life,suitable for easy and quick installation.MAKE:- WIPRO/BAJAJ Or equivalent in Havells. HAVELLS CAT PART NO:LHSTAKU7CBAF030. NOTE:- Cat part no. given above are exclusive of poles.

Supply and fixing in replacement LED street light fittings of capacity 70 watts rating 240 Volt, 50 Hz and IP-66 protection. complete all as specified and as directed by Engr-in-Charge . Make :- Havells/CG or equivalent in Wipro and Bajaj. HAVELLS CAT PART NO-ENDURACITYLINERNEOSL70WLED757PASYBOTG

Supply and fixing in replacement LED street light fittings of capacity 60 watts rating 240 Volt, 50 Hz and IP-66 protection. complete all as specified and as directed by Engr-in-Charge . Make :- Havells/CG or equivalent in Wipro and Bajaj. HAVELLS CAT PART NO- ENDURAPEARLNEOSL60WLED757PASYTOPC

Supply and fixing in replacement LED street light fittings of capacity 45 watts rating 240 Volt, 50 Hz and IP-66 protection. complete all as specified and as directed by Engr-in-Charge . Make :- Havells/CG or equivalent in Wipro and Bajaj. HAVELLS CAT PART NO- ENDURAPEARLNEOSL45WLED757PASYTOPC

Supply and fixing in replacement of Matal halide lamp 400 W, 230V, AC elect supply suitable for MH Lamp Fittings street lights spares of branded made as specified.

Supply and fixing in replacement of Matal halide lamp 150 W, 230V, AC elect supply suitable for MH Lamp Fittings street lights spares of branded made as specified.

Supply and fixing in replacement of open construction copper wound ballast suitable for HPSV / MH fittings for wattage 150 Watt complete all as specified and directed.

Supply and fixing in replacement of open construction copper wound ballast suitable for HPSV / MH fittings for wattage 400 Watt complete all as specified and directed.

Supply and fixing in replacement of electronic ignitor suitable for light fittings 70 to 400 watt complete all as specified and directed.

Supply and fixing in replacement of Lamp holder threaded type 40mm dia porcelain body suitable for HPSV/HPMV lamp fittings complete all as specified and directed.

Supply and fixing in repairs of street light brackets made out of GI tubing, light grade, 40mm bore 1200 mm Long bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40x6 mm including bolts, nuts and washer of suitable size, complete and paintign one coat of aluminium paint over a coat of red oxide primer.

Maintenance of 33/11 KV substation (TOP-II) by cleaning of all vegetation and grass, cleaning of earth pits, watering to all earth pits (appx 65 Nos), dusting out the transformers and equipments of indoor/out door types complete to keep the installation premises in a presentable manner all as directed at site.

Maintenance of indoor/outdoor sub stations, including cleaning of premises and surroundings upto 5m from outer face of wall, checking of oil level of transformers, cleaning and dusting out of transformers, panel boards, cleaning of earth pits to keep free from vegetation etc all as directed at site.

Trimming/pruning of tree branches touching to the LT over head line or near to the LT over head line as per direction of AGE E/M /JE in charge complete including removing the tree branches from site complete all as specified and directed . NOTE - (a) written shut down shall be obtained from concerned JE / AGE E/M before taking the trimming work in hand by contractor (b) span from one pole to next pole (30 to 50 m) will be considered as a job. (c) T & P such as lader , rope, cutter , axes and other related material will be provided by the contractor

Material and labour for spreading and leveling evenly (any thickness) 20 mm graded stone aggregated complete all as specified and directed.

Supply & Fixing in repairs of AC single phase keypad based, BIS marked pre-payment static Energy meter ,current rating 10-60 /20-100 A , 240 V (L-N) With bluetooth compatibility and mobile app . MAKE:- SECURE/L&T/HPL Note :- Dismantled electric meter to be diposite in AGE E/M No-1 store Yard.

S & F in replacement of XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of size 10 sqmm 2 core in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified & directed for the following sizes:- Note : (a) Excavation shall be measured and paid seperately under respective items of Sch 'A' (b) All redq lugs of suitable sizes according to laying of cable is deemed to be included in the rate coated.

All as per item No 17 but 16 Sqmm 4 core.complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

Sand cushioning with fine dry unwashed sand in trenches for protection of cables complete.

M & L for replacement Old size sub class ‘B’ bricks, laid in trenches as cable covers complete.

Supply and laying in replacement of 40mm dia GI pipes light grade in trenches/under floors or roads/along the poles or wall for protection of UG cables including sealing ends & all required fittings complete all as specified & directed

M & L for replacement MCCB 3 pole, 415 volts, fixed type 25-100 amps with breaking capacity 16 KA. complete all as specified & directed

All as per item No 25 above but 125 amps. complete all as specified & directed

M & L for replacement MCCB 3 pole, 415 volts, adjustable type 160 amps with breaking capacity 36 KA . complete all as specified & directed

All as per item No 27 above but 200 amps.

All as per item No 27 above but 250 amps.

All as per item No 27 above but 350 amps.

All as per item No 27 above but 400 amps.

Supply and fix in replacement of vice type connectors consisting of aluminium plates, and two steel bolts and nuts for 2 conductors of equal or unequal sizes, upto 13mm dia for non-tension connetions including treatment of connector and ACSR conductor with conducting jelly.

M & L for replacement of pin type porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade. complete all as specified & directed

M & L for replacement of pin type porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150 mm height, 150 mm dia for 11000 volts grade. complete all as specified & directed

M & L for replacement of shackle type porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of height 75 mm and max dia 90 mm suitable for working pressure 1100 volts grade. complete all as specified & directed

M & L for replacement of shackle type porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of height 150 mm and max dia 150 mm suitable for working pressure 11000 volts grade. complete all as specified & directed

M & L for replacement disc insulator, porcelain, vitreous 145 mm high and 255,, dia ball and socket type, white, brown or green suitable for single disc asst for tension with tension clamps for conductors, working pressure 11000 volts grade.Make : Jaipuria, Souhern insulators.

M & L for disconnecting from over head conductor, cutting worn out portion of LT U/G service cables of any type and size, repair including take out of cable from under ground loop and rejoint the same to restore elect supply all as directed.

All as per item NO 38 above but from switch gears/main switch board of any type and size including suitable size of aluminium cable lugs as directed.

Restringing of loose over head conductor/GI earth wire of any size and type after untyeing binding wire from insulators/cross arms to achieve permissible sag limit of over head line including new binding wire of proper size and pruning of tree branches of concerned spans and jointing of jumpers properly complete all as specified and directed at site.

M &L for repalcement straight through joint ( Epoxy joint) for following size PVC insulated and sheathed aluminium cable complete for following sizes :-

16 sqmm 2 core to 25 sqmm 4 core

25 to 35 sqmm 3.5 core

50 sqmm 3.5 core

70 sqmm 3.5 core

95 sqmm 3.5 core

120 to 150 sqmm 3.5 core

185 sqmm 3.5 core

All as per item No 41 above but for 11 KV (E) straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cabe of size 50 to 95 sq mm. complete all as specified and directed.

All as per item No 41 above but outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE aromoured aluminium conductor cable of size 50 sq mm to 95 sq mm. complete all as specified and directed.

All as per item No 41 above but for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE aromoured aluminium conductor cable of size 50 sq mm to 95 sq mm. complete all as specified and directed.

Material and labour in welding and painting (both welding and painting whenever required) of old existing LT panel of any size. NOTE- repairs to LT panel boards complete with necessary welding works to door , replacement of unserviceable hings and all drop bolt , complete and painting with one coat of synthetic enamel paint of approved colour internally and externally complete all as specified and directed

Vinayak Trading House

AGARWAL BUILDERS