Construction of Balance work of JNV Aglar Shopian

Amount

Job Estimate for Balance items of work for Main School Building at JNV Aglar Shopian.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal cement sand plaster of thickness 12mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand.Coarse sand

Labour Charges for rubbung and grinding of already laid 40 mm thick Terrazo marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement

40 mm thick Terrazo marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3 :6 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges75x60x3.10 mm mm with necessaryscrews.

Providing and fixing of Kailwood wire gauge shutters 35 mm thick using stainless steel grade 304 wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including with hinges Hinges75x60x3.10 mm and necessary screws : 9.22.1 lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size

Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Supply and application of of Snowcem in external surface including scaffolding and staging from NSL (height upto 44'0")

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 8.2.2.1 Area of slab over 0.50 sqm

Providing and fixing of MILD steel Grill panels INstair railing in Stairs and Verandahsfabricated from mild steel sections (square bars,flats,ISA ETC.) inclusive electric,machinery charges, adhesives like araldite complete job.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job..

I)P/F CP Brass Sink MIXER(jaquar/marc)

I)P/F CP Brass Wall MIXER(jaquar/marc)

I)P/F CP Brass Basin MIXER(jaquar/marc)

III)P/F CP Brass Bibcock(jaquar/marc)

III)P/F CP Brass Angle valve(jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

P/F CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

P/F CP Brass Toilet paper holder

IV)Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

1. Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm Dia GI Pipe (1.0'inch)

iv) 32mm Dia GI Pipe (1.25'inch)

vi) 50mm Dia GI Pipe (2.0'inch)

2. Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i)ball valve (1")

ii)ball valve (1 1/4")

iii)union (1")

iv)union (1 1/4")

v)Tank nipple (1")

vi)Tank nipple (1 1/4")

viii)ball cock

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern

9.providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i)160mm OD UPVC Prince B Type

i)110mm OD UPVC Prince B Type

i)75mm OD UPVC Prince B Type

2.supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

i)4"floor trap

ii) 4" p trap

iii) 4"door bend

iv)4"door T

v)4" Cowel

vi)4" cap

vii)3" door bend

viii)3" door Tee

ix)6" bend

X)3"floor trap

Providing and fixing of Builders Hardware

Providing and fixing IS : 1341 MS heavy weight butt hinges (heavy weight) with stainless steel screws etc. complete: 9.71.1 125x90x4.0 mm Fixing charges included above Schedule rate

AlUMUNIUM Aldrops

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 6" Handles

AlUMUNIUM 4" Handles

5.P/F OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet(Venus)make.50 LTR. Capacity

Job Estimate for Balance items of work for Kitchen and Dinning Block at JNV Aglar

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal cement sand plaster of thickness 12mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand.Coarse sand

40 mm thick Terrazo marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges75x60x3.10 mm mm with necessaryscrews.

Providing and fixing of Kailwood wire gauge shutters 35 mm thick using stainless steel grade 304 wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including 9.22.1 lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size

Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Supply and application of of Snowcem in external surface including scaffolding and staging from NSL (height upto 44'0")

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 8.2.2.1 Area of slab over 0.50 sqm

Providing and fixing of MILD steel Grill panels fabricated from mild steel sections(square bars,flats,ISA ETC.) inclusive electric, machinery charges,adhesives like araldite complete job.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

.Providing and fixing of mild steel sheets 18 gauge in eaves boarding including scaffolding,c/o electrodes,electric and machinery charges complete job.

.Providing and fixing of mild steel sheets 18 gauge in soffit work of chajjas, including scaffolding,c/o electrodes,electric and machinery charges complete job.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m2

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/ m2

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (incl hold fast lugs or with dash fasteners ): 9.1.5 First class kail wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo wood

..Providing and fixing of 12mm thick ply sheets as a base for ceiling veneer over structural framework of Budloo wood joists including cost of nails of variety etc. including scaffolding (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.19.1 Ordinary cement finish using ordinary cement

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job..

I)P/F CP Brass Sink MIXER(jaquar/marc)

I)P/F CP Brass Wall MIXER(jaquar/marc)

I)P/F CP Brass Basin MIXER(jaquar/marc)

III)P/F CP Brass Bibcock(jaquar/marc)

III)P/F CP Brass Angle valve(jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

P/F CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

P/F CP Brass Toilet paper holder

IV)Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

1. Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm Dia GI Pipe (1.0'inch)

iv) 32mm Dia GI Pipe (1.25'inch)

vi) 50mm Dia GI Pipe (2.0'inch)

2. Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i)ball valve (1")

ii)ball valve (1 1/4")

iii)union (1")

iv)union (1 1/4")

v)Tank nipple (1")

vi)Tank nipple (1 1/4")

viii)ball cock

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 2.5 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of sintex OR Comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

9.providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i)160mm OD UPVC Prince B Type

i)110mm OD UPVC Prince B Type

i)75mm OD UPVC Prince B Type

2.supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

i)4"floor trap

ii) 4" p trap

iii) 4"door bend

iv)4"door T

v)4" Cowel

vi)4" cap

vii)3" door bend

viii)3" door Tee

ix)6" bend

X)3"floor trap

Providing and fixing IS : 1341 MS heavy weight butt hinges (heavy weight) with stainless steel screws etc. complete: 9.71.1 125x90x4.0 mm Fixing charges included above Schedule rate

AlUMUNIUM Aldrops

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 6" Handles

AlUMUNIUM 4" Handles

5.P/F OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet(Venus)make.50 LTR. Capacity

Abstract of Quantity Schedule for Balance items of work for Dormitory Boys A (For 96 Students) at JNV AglarShopian.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

Brick work with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand).

Dry Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal cement sand plaster of thickness 12mm) with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement, sand Coarse sand

Labour Charges for rubbung and grinding of already laid 40 mm thick Terrazo marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement

40 mm thick Terrazo marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3 :6 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges75x60x3.10 mm mm with necessaryscrews.

Providing and fixing of Kailwood wire gauge shutters 35 mm thick using stainless steel grade 304 wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including with hinges and necessary screws : 9.22.1 lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size 9:

Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Supply and application of of Snowcem in external surface including scaffolding and staging from NSL (height upto 44'0")

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 8.2.2.1 Area of slab over 0.50 sqm

Providing and fixing of MILD steel Grill panels in Stairs and Verandahsfabricated from mild steel sections(square bars,flats,ISA hollow tube sections ETC.) inclusive electric,machinery charges,adhesives like araldite complete job. inclusive electric,machinery charges, adhesives like araldite complete job.

Providing and fixing 18 mm Block Board with commercial ply veneering on both sides,

Providing wood work in frames , jam work partitions etc. sawn and fixed in position Budloo wood

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job..

I)P/F CP Brass Sink MIXER(jaquar/marc)

I)P/F CP Brass Wall MIXER(jaquar/marc)

I)P/F CP Brass Basin MIXER(jaquar/marc)

III)P/F CP Brass Bibcock(jaquar/marc)

III)P/F CP Brass Angle valve(jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

P/F CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

P/F CP Brass Toilet paper holder

IV)Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

1. Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm Dia GI Pipe (1.0'inch)

iv) 32mm Dia GI Pipe (1.25'inch)

vi) 50mm Dia GI Pipe (2.0'inch)

2. Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i)ball valve (1")

ii)ball valve (1 1/4")

iii)union (1")

iv)union (1 1/4")

v)Tank nipple (1")

vi)Tank nipple (1 1/4")

viii)ball cock

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 2.5 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of sintex /comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

9.providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i)160mm OD UPVC Prince B Type

i)110mm OD UPVC Prince B Type

i)75mm OD UPVC Prince B Type

2.supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent. Prince

i)4"floor trap

ii) 4" p trap

iii) 4"door bend

iv)4"door T

v)4" Cowel

vi)4" cap

vii)3" door bend

viii)3" door Tee

ix)6" bend

i)3"floor trap

Providing and fixing of Builders Hardware

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete 9.56.1 125x90x4.00 mm

AlUMUNIUM Aldrops

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 6" Handles

AlUMUNIUM 4" Handles

5.P/F OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet (Venus,Racold,Havells)make 50 LTR. Capacity

13.69 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : 13.69.1 New work

Abstract of Quantity Schedule for Balance items of work for Dormitory Boys B (For 96 Students) at JNV Aglar

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil.

Brick work with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand).

Dry Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal cement sand plaster of thickness 12mm(under coat 15mm and finishing coat 5mm) with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand.

40 mm thick Terrazo marble chips flooring, rubbed and polished to graNolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm Nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm Nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm Nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm Nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1 :2 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm Nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm Nominal size. .

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges 75x60x3.10 mm with necessaryscrews.

Providing and fixing of Kailwood wire gauge shutters 35 mm thick using stainless steel grade 304 wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows including ISI marked MS Butt Hinges 75x60x3.10 mm with necessary screws including

Providing and fixing of Kailwood Door shutters 35 mm thick using ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Supply and application of of Snowcem in external surface including scaffolding and staging from NSL (height upto 44'0").

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 8.2.2.1 Area of slab over 0.50 Sqm.

Providing and fixing of Providing and fixing of MILD steel Grill panels fabricated from mild steel sections(square bars,flats,ISA ,hollow tube sectionsETC.) inclusive electric,machinery charges, adhesives like araldite complete job.and in stair railing in Stairs and Verandahs inclusive electric,machinery charges,adhesives like araldite complete job.

Providing and fixing 18 mm Block Board with commercial ply veneering on both sides,

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing of mild steel sheets 18 gauge in soffit work of chajjas, including scaffolding,c/o electrodes,electric and machinery charges complete job.

Providing and fixing of mild steel sheets 18 gauge in eaves boarding including scaffolding,c/o electrodes,electric and machinery charges complete job.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating Not less than 275 gm/ m2

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating Not less than 275 gm/ m2

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (incl hold fast lugs or with dash fasteners ): 9.1.5 First class kail wood

Providing wood work in frames of false ceiling, jam work partitions etc. sawn and fixed in position Budloo wood

Providing and fixing of 12mm thick ply sheets as a base for ceiling veneer over structural framework of Budloo wood joists including cost of nails of variety etc. including scaffolding (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm Nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.19.1 Ordinary cement finish using ordinary cement

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job.

I)P/F CP Brass Sink MIXER(jaquar/marc)

I)P/F CP Brass Wall MIXER(jaquar/marc)

I)P/F CP Brass Basin MIXER(jaquar/marc)

III)P/F CP Brass Bibcock(jaquar/marc)

III)P/F CP Brass Angle valve(jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

P/F CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

P/F CP Brass Toilet paper holder

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm Dia GI Pipe (1.0'inch)

iv) 32mm Dia GI Pipe (1.25'inch)

vi) 50mm Dia GI Pipe (2.0'inch)

Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i) Ball valve (1")

ii) Ball valve (1 1/4")

iii) Union (1")

iv) Union (1 1/4")

v) Tank nipple (1")

vi) Tank nipple (1 1/4")

viii) Ball cock

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 2.5 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of sintex /comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

Providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i) 160mm OD UPVC Prince B Type

i) 110mm OD UPVC Prince B Type

i) 75mm OD UPVC Prince B Type

Supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

i) 4"floor trap

ii) 4" p trap

iii) 4"door bend

iv) 4"door T

v) 4" Cowel

vi) 4" cap

vii) 3" door bend

viii) 3" door Tee

ix) 6" bend

X) 3"floor trap

Providing and fixing of Builders Hardware

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete 9.56.1 125x90x4.00 mm

AlUMUNIUM Aldrops

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 6" Handles

AlUMUNIUM 4" Handles

5.P/F OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outletVenus,Racold,Havells)make 50 LTR. Capacity

13.69 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : 13.69.1 New work

Abstract of Quantity Schedule for Balance items of work for Dormitory Girls (For 96 Students) at JNV Aglar Shopian.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones

Application of internal cement sand plaster of thickness 12mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand.Coarse sand

40 mm thick Terrazo marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 9 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4 mm to 7 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume, including cement slurry etc. complete.Dark shade pigment with Ordinary cement

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges75x60x3.10 mm mm with necessaryscrews.

Providing and fixing of Kailwood wire gauge shutters 35 mm thick using stainless steel grade 304 wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including 9.22.1 lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size

Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Supply and application of of Snowcem in external surface including scaffolding and staging from NSL (height upto 44'0")

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 8.2.2.1 Area of slab over 0.50 sqm

Providing and fixing of Providing and fixing of MILD steel Grill panels in stair railing in Stairs and Verandahs fabricated from mild steel sections (square bars, flats, ISA , tube sectionsETC.) inclusive electric,machinery charges,adhesives like araldite complete job. inclusive electric,machinery charges, adhesives like araldite complete job.

Providing and fixing 18 mm Block Board with commercial ply veneering on both sides,

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing of mild steel sheets 18 gauge in soffit work of chajjas, including scaffolding,c/o electrodes, electric and machinery charges complete job.

Providing and fixing of mild steel sheets 18 gauge in eaves boarding including scaffolding,c/o electrodes, electric and machinery charges complete job.

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m2

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/ m2

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo wood

..Providing and fixing of 12mm thick ply sheets as a base for ceiling veneer over structural framework of Budloo wood joists including cost of nails of variety etc. including scaffolding (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.19.1 Ordinary cement finish using ordinary cement

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

P/F of below mentioned CP fittings(Jaquar series) including c/o screws electric and machinery charges complete job..

I)P/F CP Brass Sink MIXER(jaquar/marc)

I)P/F CP Brass Wall MIXER(jaquar/marc)

I)P/F CP Brass Basin MIXER(jaquar/marc)

III)P/F CP Brass Bibcock(jaquar/marc)

III)P/F CP Brass Angle valve(jaquar/marc)

III)P/F CP Brass Nipples 15mm dia and 20 mm long

III)P/F CP Brass Grating

III)P/F CP Brass Soap case

P/F CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

P/F CP Brass Toilet paper holder

IV)Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

1. Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

i) 15mm Dia GI Pipe(.5'inch)

ii) 20mm Dia GI Pipe (.75'inch)

iii) 25mm Dia GI Pipe (1.0'inch)

iv) 32mm Dia GI Pipe (1.25'inch)

vi) 50mm Dia GI Pipe (2.0'inch)

2. Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i)ball valve (1")

ii)ball valve (1 1/4")

iii)union (1")

iv)union (1 1/4")

v)Tank nipple (1")

vi)Tank nipple (1 1/4")

viii)ball cock

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 2.5 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of sintex overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

9.providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i)160mm OD UPVC Prince B Type

i)110mm OD UPVC Prince B Type

i)75mm OD UPVC Prince B Type

2.supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

i)4"floor trap

ii) 4" p trap

iii) 4"door bend

iv)4"door T

v)4" Cowel

vi)4" cap

vii)3" door bend

viii)3" door Tee

ix)6" bend

X)3"floor trap

Providing and fixing of Builders Hardware

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete 56.1 125x90x4.00 mm

AlUMUNIUM Aldrops

AlUMUNIUM 6" Tower bolts

AlUMUNIUM 4" Tower bolts

AlUMUNIUM 6" Handles

AlUMUNIUM 4" Handles

5.P/F OF STORAGE TYPE VERTICAL HOT WATER HEATER(Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet (Venus)make.50 LTR. Capacity

13.69 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : 13.69.1 New work

Abstract of Quantity Schedule for Balance items of work for Development and Miscellaneous Work at JNV Aglar Shopian.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 2.10.1 All kinds of soil 2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1(50%Ordinary Soil and 50% ordinary rock)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2.1.1 All kinds of soil

Brick work with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:6 (1 cement : 6 coarse sand).

Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : 7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Supply and filling of boulders as a filter media/bacfiliing incl carriage,loading and unloading complete job.

Application of internal cement sand plaster of thickness 12mm( with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of ement,sand.Coarse sand

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone -III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2 :4 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm Nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm Nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3 :6 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. .

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 18 mm Block Board with commercial ply veneering on both sides,

Providing wood work in jam work,frames of false ceiling, partitions etc. sawn and fixed in position Budloo wood

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs in external works i/c trenching and refilling providing of Yarn at joints, inclusive eletric and machinary charge.

iii) 25mm Dia GI Pipe (1.0'inch)

vi) 50mm Dia GI Pipe (2.0'inch)

Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

i) Ball valve (1")

iii) Union (1")

Providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

i) 110mm OD UPVC Prince B Type

Supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

iii) 4"door bend

iv) 4"door T

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5i ncl Cover

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Supply and filling of GSB /Nallah muck in layers not exceeding 20 cm in depth including levelling ,dressing and consolidation ,watering etc with power road roller 8-10 MT Capacity including carriage upto site of work complete.

16.3 Supplying and stacking at site. 16.3.1 90 mm to 45 mm size stone aggregate

16.3.2 63 mm to 45 mm size stone aggregat

16.3.3 53 mm to 22.4 mm size stone aggregate

16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density

16.6 Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling. 16.6.1 With road roller/ hand roller

16.30 Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications 16.30.1 On W.B.M. @ 0.75 Kg / sqm

16.57 Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 16.57.1 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.

16.56 Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-inCharge. 16.56.1 25 mm compacted thickness with bitumen of grade VG30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity

16.40 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete.

23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.(400mm dia) 23.1.1 (50%All types of soil and 50% 23.1.2 Rocky strata including Boulder

23.11 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including slotted length and painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge 23.11.3 200 mm nominal size dia

1. Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge. 100mm

23.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

23.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200mm dia

23.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 23.14.1 200 mm clamp

23.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 23.15.1 200 mm dia

23.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

23.8 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

23.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.

Shifting of machinery and stabilization of drilling plant machinery

Submersible pump as per discharge of well along with flow control devices.

ESTIMATE FOR INTERNAL ELECTRIFICATION OF MAIN SCHOOL BUILDING AT JNV AGLAR SHOPIAN

Wiring for light point / Fan point / Exhaust fan point / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / Recessed medium class PVC conduit with modular switch, modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required. (Excluding PVC conduit and GI boxes)

Wiring for light plugs with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required (excluding PVC conduit)

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required(excluding PVC conduit)

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required.(excluding PVC conduit)

2x2.5sqmm + 1 no.2.5sqmm pvc insulated copper conductor for Earthing

2x4sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x6 sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x10sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch including connections and civil work excluding G.I box and cover plates

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch including connections and civil work excluding G.I box & cover plates

Supply & fixing of 8 way Double door TPN sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply and fixing of 6-32Amp SP 240V " C " series miniature circuit breaker ( MCB) suitable for lighting and other loads in the existing MCB DB"s complete with connections, testing & commissioning etc as per technical specifications

Supply, installation, testing and commissioning of following rating DP MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge 32-40Amp

Supply, installation, testing and commissioning of Ceiling fans complete with double ball bearig, motor bearing, r, blades, down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required 5 star rating. 1400 mm Sweep

Supply, installation, testing & commissioning of 900 RPM 300mm Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers, shutters etc complete as required

Supply, Installation, testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement powder coated INCOMERS. MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1N0 Anaolog-meter 1 set Indicating Lamps ( RYB ) 1 set Current-Transformer ( 600/5A 10VA burden) class-1 2set Aluminium bus-bar 200 Amp FP E-91 Electrolytic AL 2sets. Out-Goings

MCB 80 Amp DP with Breaking capacity 10 KA 08 Nos MCB 40 Amp DP with Breaking capacity 10 KA 08 Nos

Load Bearing Member to be made out of 2.0mm CRCA Sheet Partition to be made out of 1.6mm CRCA Sheet

Supply, Installation ,Testing of indoor surface Downlight suitable for output of 1500 lumens and maximum Wattage of 15 watt, housing should be made of Die cast aluminium and polycarbonate diffused .The luminaire should have CRI>80 and CCT of 6500K.The luminarie shall be compliant with IP 20 classification .The fixture shall have a minimum efficiacy of 100 lumens/ watt and a minimum system lumen output of 1200lumens and maximum system wattage of 12 watts. The lumainaire shall be designed so as to ensure lumen depreciation of upto 30% over 50K burning hours @ design ambient temp. of 45 deg c.The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC. The LED driver shall comply to IEC 61000-3-2 ed .3.2 2009 for harmonics . Manfacturer shall have inhouse lab. approved by NABL oe ministry of science of Govt. of India. LM 70 and LM 80 reports needed to be submitted from a NABL / UL accredited Lab.

Supply, Installation, Testing of integral 4 ft luminaire with CRCA housing PC GLOSSY Cover. The luminarie should have a color consistency SDCM < 5,CRI > 80 and CCT of 6500 K. The luminarie shall be compliant with IP 20 classification .The luminary shall be designed to emit atleast 2000 nominal lumens at a system efficacy of atleast 115 lumen / watt. with a maximum system wattage of 19watts. .The lumainaire shall be designed so as to ensure lumen depreciation of upto 30% over 50K burning hours @ design ambient temp. of 45 deg c. The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC. The LED driver shall comply to IEC 61000-3-2 ed .3.2 2009 for harmonics. Manufacturer shall have inhouse lab. approved by NABL oe ministry of science of Govt. of India. LM 70 and LM 80 reports needed to be submitted from a NABL / UL accredited Lab.

Providing and fixing of Bulk head/Bracket light 20 watt or equal to 20 watts

Supply and fixing of following size / modules G.I box along with Modular base / Cover plate for Modular Switches/ sockets in recess etc

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mm x 5mm G.I strip for earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excavation, refilling as required

Supply and fixing of blanking plates

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same 25mm dia

supply and fixing of Backlite sheet of white colour 2 mm thick for inspection cover and etc.

ESTIMATE FOR INTERNAL ELECTRIFICATION OF KITCHEN/DINNING BLOCK AT JNV AGLAR. (SHOPIAN)

Wiring for light point / Fan point / Exhaust fan point / call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / Recessed medium class PVC conduit with modular switch, modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for light plugs with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. Of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required.

2x2.5sqmm + 1 no.2.5sqmm pvc insulated copper conductor for Earthing

2x4sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x6 sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

2x10sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch including connections and civil work

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch including connections and civil work

Supply & fixing of 4 way Double door TPN sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply and fixing of 6-32Amp SP 240V " C " series miniature circuit breaker ( MCB) suitable for lighting and other loads in the existing MCB DB"s complete with connections ,testing & commissioning ets as per technical specifications

Supply, installation, testing and commissioning of following rating DP MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge 32-40Amp

Supply, installation, testing and commissioning of Ceiling fans complete with double ball bearig, motor bearing, r, blades, down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required 5 star rating 1400 mm Sweep

Supply, installation, testing & commissioning of 900 RPM 300mm Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers, shutters etc complete as required

Supply and fixing of industrial plug 32 amps SPN socket outlet with 2 pole and earth metal enclosed plug top along with 32 amp c curve SP McB in sheet steel enclosure, on surface or recess with chained metal cover for the socket outlet and complete with connections is required.

Supply, Installation, testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement powder coated with INCOMERS as follows MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1No Analog-meter ( A&V) 2 Sets Indicating Lamps ( RYB ) 2 set current-Transformer ( 600/5A 10VA burden) class-1 2set Aluminum bus-bar 200 Amp FP E-91 Electrolytic AL 2 sets. Out-Goings

MCB 63 Amp DP with Breaking capacity 10 KA 6 Nos MCB 40 Amp DP with Breaking capacity 10 KA 6 Nos Change over switch 4pole 63 Amp 01 N0s

Load Bearing Member to be made out of 2.0mm CRCA Sheet partition to be made out of 1.6mm CRCA Sheet (16SWG)

Supply, Installation, Testing of indoor surface Downlight suitable for output of 1500 lumens and maximum Wattage of 15 watt, housing should be made of Die cast aluminium and polycarbonate diffused. The luminaire should have CRI>80 and CCT of 6500K.The luminarie shall be compliant with IP 20 classification .The fixture shall have a minimum efficiacy of 100 lumens/ watt and a minimum system lumen output of 1200lumens and maximum system wattage of 12 watts.. Manfacturer shall have inhouse lab. approved by NABL oe ministry of science of Govt. of India. LM 70 and LM 80 reports needed to be submitted from a NABL / UL accredited Lab.

Supply, Installation, Testing of integral 4 ft luminaire with CRCA housing PC GLOSSY Cover. The luminarie should have a color consistency SDCM < 5,CRI > 80 and CCT of 6500 K. The luminarie shall be compliant with IP 20 classification .The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.The LED driver shall comply to IEC 61000-3-2 ed .3.2 2009 for harmonics. Manfacturer shall have inhouse lab. approved by NABL oe ministry of science of Govt. of India. LM 70 and LM 80 reports needed to be submitted from a NABL / UL accredited Lab.

Providing and fixing of Bulk head/Bracket light 20 watt or equal to 20 watts

Supply and fixing of following size / modules G.I box along with Modular base / Cover plate for Modular Switches/ sockets in recess etc

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip fpr earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excavation, refilling as required

Supply and fixing of blanking plates

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same 25mm dia

supply and fixing of Backlite sheet of white colour 2 mm thick for inspection cover and etc.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185sq. mm

Design, fabrication, assembling, supply, installation, testing and commissioning of MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system. with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels. Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.(double door) lockable.I) 5cft panels.

MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1No

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3.5core 120mmsq

ESTIMATE FOR INTERNAL ELECTRIFICATION OF DORMITORY BLOCK A FOR BOYS AT JNV AGLAR SHOPIAN

Wiring for light point / Fan point / Exhaust fan point / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / Recessed medium class PVC conduit with modular switch, modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.(Excluding PVC conduit)

Wiring for light plugs with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as requierd(excluding PVC conduit)

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. Of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required(excluding PVC conduit)

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required.(excluding PVC conduit) 2x2.5sqmm + 1 no.2.5sqmm pvc insulated copper conductor for Earthing

2x4sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x6 sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x10sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch with indicator type including connections and civil work exluding G.I box and cover plates

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch with indicator type including connections and civil work excluding G.I box & cover plates

Supply & fixing of 4 way Double door TPN sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply & fixing of 16 way Double door single pole and neutral sheet steel MCB distribution board 240V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply and fixing of 6-32Amp SP 240V " C " series miniature circuit breaker ( MCB) suitable for lighting and other loads in the existing MCB DB"s complete with connections, testing & commissioning ets as per technical specifications

Supply, installation, testing and commissioning of following rating TPN MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge 32-40Amp

Supply, installation, testing and commissioning of Ceiling fans ( crompton greaves High Breez or approved equivalent ) complete with double ball bearig, motor bearing, r, blades, down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required 5 star rating 1200 mm Sweep

Supply, installation, testing & commissioning of 900 RPM 300mm ( Crompton Greaves trans Air or approved equivalent ) Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers, shutters etc complete as required

Supply, Installation, testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement powder coated INCOMERS MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1No Analog meter 2 sets Indicating Lamps ( RYB ) 2 set Current-Transformer (600/5A 10VA burden) class-1 2 set Aluminium bus-bar 200 Amp FP E-91 Electrolytic AL 2sets. Out-Goings

MCB 63 Amp DP with Breaking capacity 10 KA 5 Nos MCB 40 Amp DP with Breaking capacity 10 KA 5 Nos Change over switch 4pole 100 Amp 01 Nos load Bearing Member to be made out of 2.0mm CRCA Sheet Partition to be made out of 1.6mm CRCA Sheet Gland Plates to be made3.0 mm thick Complete job

Supply, Installation, Testing of indoor surface Downlight suitable for output of 1500 lumens and maximum Wattage of 15 watt, housing should be made of Die cast aluminium and polycarbonate diffused. The luminaire should have CRI>80 and CCT of 6500K. The fixture shall have a minimum efficiacy of 100 lumens/ watt and a minimum system lumen output of 1200lumens and maximum system wattage of 12 watts. over 50K burning hours @ design ambient temp.of 45 deg c.The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.

Supply, Installation, Testing of integral 4ft luminaire with CRCA housing PC GLOSSY Cover. The luminarie should have a color consistency SDCM < 5,CRI > 80 and CCT of 6500 K.. The luminary shall have efficiency of atleast 115 lumen / watt. with a maximum system wattage of 19watts. over 50K burning hours @ design ambient temp of 45 deg c. The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.

Providing and fixing of Bulk head/Bracket light 20 watt or equal to 20 watts

Supply and fixing of following size / modules G.I box along with Modular base / Cover plate for Modular Switches/ sockets in recess etc 4M

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip fpr earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excuvation, refilling as required

Supply and fixing of blanking plates

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same 25mm dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185sq. mm

Design, fabrication, assembling, supply, installation, testing and commissioning of MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system. with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels. Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.(double door) lockable. I) 5cft panels.

MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1N0

P/F of MCB 63 amps DP

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3.5core 120mmsq

supply and fixing of Backlite sheet of white colour 2 mm thick for inspection cover and etc.

INTERNAL ELECTRIFICATION OF DORMITORY BLOCK B FOR BOYS AT JNV AGLAR SHOPIAN

Wiring for light point / Fan point / Exhaust fan point / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / Recessed medium class PVC conduit with modular switch, modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.(Excluding PVC conduit)

Wiring for light plugs with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required (excluding PVC conduit)

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. Of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required(excluding PVC conduit)

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required.(excluding PVC conduit)

2x2.5sqmm + 1 no.2.5sqmm pvc insulated copper conductor for Earthing

2x4sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x6 sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x10sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch with indicator type including connections and civil work exluding G.I box and cover plates

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch with indicator type including connections and civil work exluding G.I box & cover plates

Supply & fixing of 4 way Double door TPN sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply & fixing of 16 way Double door single pole and neutral sheet steel MCB distribution board 240V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, Interconnection powder painted including earthing etc.

Supply and fixing of 6-32Amp SP 240V " C " series miniature circuit breaker ( MCB) suitable for lighting and other loads in the existing MCB DB"s complete with connections, testing & commissioning ets as per technical specifications

Supply, installation, testing and commissioning of following rating TPN MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge 32-40Amp

Supply, installation, testing and commissioning of Ceiling fans (crompton greaves High Breez or approved equivalent ) complete with double ball bearing, motor bearing, blades, down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required 5 star rating 1200 mm Sweep

Supply, installation, testing & commissioning of 900 RPM 300mm ( Crompton Greaves trans Air or approved equivalent ) Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers, shutters etc complete as required

Supply, Installation, testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement powder coated INCOMERS

MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1N0 Analog meter 2 sets Indicating Lamps ( RYB ) 2 set Current-Transformer ( 600/5A 10VA burden) class-1 2set Aluminium bus-bar 200 Amp FP E-91 Electrolutic AL 2sets. Out-Goings

MCB 63 Amp DP with Breaking capacity 10 KA 5 Nos MCB 40 Amp DP with Breaking capacity 10 KA 5 Nos Change over switch 4pole 100 Amp 01 N0s

Load Bearing Member to be made out of 2.0mm CRCA Sheet Partition to be made out of 1.6mm CRCA Sheet Gland Plates to be made3.0 mm thick Complete job

Supply ,Installation, Testing of indoor surface Downlight suitable for output of 1500 lumens and maximum Wattage of 15 watt, housing should be made of Die cast aluminum and polycarbonate diffused. The luminaire should have CRI>80 and CCT of 6500K. The fixture shall have a minimum efficacy of 100 lumens/ watt and a minimum system lumen output of 1200lumens and maximum system wattage of 12 watts. over 50K burning hours @ design ambient temp. of 45 deg c.The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.

Supply, Installation, Testing of integral 4 ft luminaire with CRCA housing PC GLOSSY Cover. The luminarie should have a color consistency SDCM < 5,CRI > 80 and CCT of 6500 K.. The luminary shall have efficiency of atleast 115 lumen / watt. with a maximum system wattage of 19watts. over 50K burning hours @ design ambient temp. of 45 deg c. The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.

Providing and fixing of Bulk head/Bracket light 20 watt or equal to 20 watts

Supply and fixing of following size / modules G.I box along with Modular base / Cover plate for Modular Switches/ sockets in recess etc 4M

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip fpr earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excavation, refilling as required

Supply and fixing of blanking plates

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same 25mm dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185sq. mm

Design, fabrication, assembling, supply, installation, testing and commissioning of MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system. with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels. Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel. (double door) lockable.I) 5cft panels.

MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1No

P/F of MCB 63 amps DP

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3.5core 120mmsq

supply and fixing of Backlite sheet of white colour 2 mm thick for inspection cover and etc.

ESTIMATE FOR INTERNAL ELECTRIFICATION OF DORMITORY BLOCK FOR GIRLS AT JNV AGLAR SHOPIAN

Wiring for light point / Fan point / Exhaust fan point / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / Recessed medium class PVC conduit with modular switch, modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.(Excluding PVC conduit)

Wiring for light plugs with 2 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as requierd(excluding PVC conduit)

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. Of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required (excluding PVC conduit)

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required.(excluding PVC conduit)

2x2.5sqmm + 1 no.2.5sqmm pvc insulated copper conductor for Earthing

2x4sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x6 sqmm + 1 no.4 sqmm pvc insulated copper conductor for Earthing

2x10sqmm + 1 no.6 sqmm pvc insulated copper conductor for Earthing

Supply and fixing of 3 pin 5/6 amp modular socket outlet with shutters and 5/6 amp modular type switch with indicator type including connections and civil work excluding G.I box and cover plates

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch with indicator type including connections and civil work excluding G.I box & cover plates

Supply & fixing of 4 way Double door TPN sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply & fixing of 16 way Double door single pole and neutral sheet steel MCB distribution board 240V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Supply and fixing of 6-32Amp SP 240V " C " series miniature circuit breaker ( MCB) suitable for lighting and other loads in the existing MCB DB"s complete with connections, testing & commissioning etc as per technical specifications

Supply, installation, testing and commissioning of following rating TPN MCB"s with breaking capacity of 10KA as per IEC 60947-2 and as per the satisfaction of Engineer incharge 32-40Amp

Supply, installation, testing and commissioning of Ceiling fans (crompton greaves High Breez or approved equivalent) complete with double ball bearig, motor bearing, r, blades, down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required 5 star rating 1200 mm Sweep

Supply, installation, testing & commissioning of 900 RPM 300mm ( Crompton Greaves trans Air or approved equivalent ) Exhaust Fan suitable for single phase 230v 50HZ AC supply Complete with motor louvers, shutters etc complete as required

Supply ,Installation, testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement powder coated INCOMERS

MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1No Analog meter 2 sets Indicating Lamps ( RYB ) 2 set Current-Transformer ( 600/5A 10VA burden) class-1 2set Aluminium bus-bar 200 Amp FP E-91 Electrolytic AL 2sets. Out-Goings

MCB 63 Amp DP with Breaking capacity 10 KA 5 Nos MCB 40 Amp DP with Breaking capacity 10 KA 5 Nos Change over switch 4pole 100 Amp 01 N0s Load Bearing Member to be made out of 2.0mm CRCA Sheet Partition to be made out of 1.6mm CRCA Sheet Gland Pltes to be made3.0 mm thick Complete job

Supply, Installation, Testing of indoor surface Downlight suitable for output of 1500 lumens and maximum Wattage of 15 watt, housing should be made of Die cast aluminium and polycarbonate diffused. The luminaire should have CRI>80 and CCT of 6500K. The fixture shall have a minimum efficiacy of 100 lumens/ watt and a minimum system lumen output of 1200lumens and maximum system wattage of 12 watts. over 50K burning hours @ design ambient temp. of 45 deg c. The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.

Supply, Installation, Testing of integral 4 ft luminaire with CRCA housing PC GLOSSY Cover. The luminarie should have a color consistency SDCM < 5,CRI > 80 and CCT of 6500 K.. The luminary shall have efficiency of atleast 115 lumen / watt. with a maximum system wattage of 19watts. over 50K burning hours @ design ambient temp. of 45 deg c. The electronic driver used shall have a power factor > 0.95, THD < 10%.and suitable for a system voltage range 140-270V AC.

Providing and fixing of Bulk head/Bracket light 20 watt or equal to 20 watts

Supply and fixing of following size / modules G.I box along with Modular base / Cover plate for Modular Switches/ sockets in recess etc 4M

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip fpr earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excuvation, refilling as required

Supply and fixing of blanking plates

Supply and laying of following dia PVC Conduit B class 2 mm thick along with accessories recess/ surface including cutting of walls and making good the same 25mm dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185sq. mm

Design, fabrication, assembling, supply, installation, testing and commissioning of MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system. with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels. Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel. (double door) lockable.I) 5cft panels.

MCCB 160 Amp 4 Pole with breaking capacity 36 KA 1N0

P/F of MCB 63 amps DP

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3.5core 120mmsq

supply and fixing of Backlite sheet of white colour 2 mm thick for inspection cover and etc.

ESTIMATE FOR ELECTRIFICATION OF PUMP HOUSE, EXTERNAL ILLUMINATION, FEEDER PILLARS AND CABLES ETC AT JNV AGLAR SHOPIAN

Supply & fixing of 6 way Double door SPN sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection powder painted including earthing etc.

Wiring for light point / Fan point / Exhaust fan point / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / Recessed medium class PVC conduit with modular switch, modular base/ Cover plate suitable G.I box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.(Excluding PVC conduit and GI boxes)

Wiring for power plugs with 2x4qmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 1no. Of 4 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required(excluding PVC conduit)

Supply and fixing of 3 pin 15/16 amp modular socket outlet with shutters and 15/16 amp modular type switch with indicator type including connections and civil work excluding G.I box & cover plates

Supply and fixing of industrial plug 32 amps SPN socket outlet with 2 pole and earth metal enclosed plug top along with 32 amp c curve SP McB in sheet steel enclosure, on surface or recess with chained metal cover for the socket outlet and complete with connections is required.

Providing and fixing of pole box of 18SWG 6"x8" suitable for Mcbs and 10 amps connector complete with nuts and bolts, clamp etc.

Earthing with G.I Earth Plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip fpr earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excavation, refilling as required

Providing and fixing of LED 60W or close to 60 watts Flood lights CCT 6000.

Erection of steel tubular pole in cement concrete 1;3;6 foundation including excavation and refilling as per standard

Supplying of steel tubular poles 9mts long SP 33 duly wedged in three parts as per IS standard with MS base plate and top.ST pole shall be drilled by suitable holes for channel mounting etc.

Supply and fixing of GI pipe 50 mm dia medium gauge to be made as ring/square(1x1 Mt) for mounting of light fixture as per design of 60 watt light fixture.

Supply and fixing of GI pipe 50 mm dia to be made as cable entry point to pole box including bends as required 1.5 Mt from bottom of pole to pole box

Design, fabrication, assembling, supply, installation, testing and commissioning of MAIN FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system. with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels. Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel. (double door) lockable.I) 5cft panels.

MCB 63Amps 2 Pole

Design, fabrication, assembling, supply, installation, testing and commissioning of FEEDER PILLAR suitable for 415 V, 3 phase, 50 Hz, 4 wire power supply system. with 100 amps Al bus bar 3 phase as per system requirement for main panel n single phase for feeder panels. Panels shall be fabricated out of 2 mm thick CRCA sheet steel in cubical formation, compartmentalized in Form 3b Construction, floor mounted, free standing and shall be dust and vermin proof. 3 mm thick cable gland plate, shall be provided both at the top and the bottom of the panel.(double door) lockable.I) (2.5’”x1.5’x1’) =3.75cft feeder panels

P/F of MCB 2pole 63 amp

P/F of MCB 2 pole 40 amp

P/F of MCB single pole c curve 16/10amp

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 10 sq. mm and upto 95 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 2core 25mmsq

2core16mmsq

2core10mmsq

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

2core 25mmsq

2core16mmsq

2core10mmsq

Supply, Installation, testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement powder coated INCOMERS voltmeter/ ammeter 2 no Indicating Lamps ( RYB ) 2 set Current-Transformer ( 600/5A 10VA burden) class-1 2set Aluminum bus-bar 800 Amp FP E-91 Electrolytic AL 2sets.

MCCB 630 Amp MCCB 4 P with Breaking capacity 50KA

MCCB 200 Amp MCCB 4 P with Breaking capacity 36KA

Supplying of cables for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 1core 400mmsq

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, and refilling the trench etc. as required. Above 185 sq. mm and upto 400sq. mm

Providing/fixing of PVC conduit

P/D/L of 0.1 aluminium conductor

2x10 sqmm + 1 x 6 sqmm pvc insulated copper conductor for Earthing

Providing/fixing of angle / batton holder

ESTIMATE FOR PROVIDING AND FIXING OF 315 KVA DISTRIBUTION TRANSFORMER AND 250 KVA AVR AT JNV AGLAR SHOPIAN

315 KVA, DISTRIBUTION TRANSFORMER

Supply/ Installation/ testing/ commissioning of 315 KVA, Distribution Transformer, Copper Wound, with following specifications: -

a) Outdoor type.

b) Oil cooled.

c) 3 phase, 50 HZ

d) Input voltage range = 1 1000V (Delta Connected)

e) Output voltage range = 433 Volts (Star Connected)

f) Operating ambient temperature = 45 Deg. To (-) 5 Deg

g) The Transformer shall be supported on heavy-duty wheels for easy portability.

h) Purity of copper = 99.9% (Birla copper)

i) Transformer oil will be fresh and of first quality of APAR / SAVITA make.

j) Cold rolled grain oriented High grade silicon lamination sheet for minimum losses.

k) Sheet steel tank made out of 3 mm thick sheet steel, provided with cooling radiators for effective cooling. I) Silica gel breather along with conservator tank will be provided.

m) Explosion vent for release of pressure will be provided on the tank cover

n) 4-Nos. Lifting hooks will be provided for easy loading and unloading

o) Earthing terminals 2 no will be provided

p) Dielectric strength of the transformer oil will be more than 40KV

250KVA. SERVO VOLTAGE STABILIZER

S/I/T and commissioning of copper wound servo controlled automatic voltage stabilizer with following specifications:‑

a) Input voltage range = 270 to 440 volts (Phase to Phase)

b) Output voltage range = 415 volts ± 1% (Phase to Phase)

c) Frequency: 50 HZ.

d) Capacity overload: 20 % overload for one hour.

e) Protection : Over Load, Short Circuit, Over Voltage, Under Voltage with Bypass Arrangement Indoor type

g) Unbalance type

h) It shall Suitable for all power Factor.

i) Cooling shall be ONAN.

NAZIR AHMAD WANI

MS ABRAQ INFRASTRUCTURES LLP