Replacement of damaged doors, windows and Repairs to toilets of General Hospital, Mahe.

Amount

Code No. 2.6.1:- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including disposal of excavated earth ,lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.- All kinds of soil.

Code No. 4.1.3:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No.4.5.1:-Providing and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain windows sills, shelves, louvers, steps, stair cases etc., including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Code No.7.100.1:- Laterite Stone Masonry for building work using neatly dressed Laterite Stone of size 30x20x20 cm in cement mortar 1:4 (1 cement : 4 Coarse sand ) for foundation and basement

Code No.9.1.2I:-Providing wood work in frames of doors, windows,clerestory windows and otherframes, wrought framed and fixed in position - Irul wood

Code No. 9.5.1.2M:-Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. - Malabar teak wood - 30mm thick shutters

Code No.9.7.1M:-Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Malabar teak wood

Code No.9.62.1:- Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. complete - 300x16mm

Code No.9.82:-Providing and fixing bright finished brass hanging type floor stopper with necessary screws, etc.complete

Code No. 9.84:-Providing and fixing IS:3564 make aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc.complete

Code No.9.97.4:- Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour orshade with necessary screws etc.complete :- 150x10mm

Code No. 9.100.1:- Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-125mm

Code No. 9.134.1:-Providing and fixing of 65mm Godrej Navtal lock of 6 levers etc complete

Code No.10.25.2:-Steel work welded in built up section/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder,

Code No. 11.37:- Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacture) of 1st quality conforming to IS : 15622 of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian ) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Code No.11.41.2A:- Providing and laying fully vitrified floor tiles of size 60x60cm (thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Rak/ Johnson / Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.

Code No.12.41.2:- Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Code No. 13.47.1:- Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade - New work (Two or more coats applied @ 1.43 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm).

Code No.14.1.1:-Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - With cement mortar 1:4 (1 cement : 4 fine sand)

Code No.14.54.1:- Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade - One or more coats on old work.

Code No. 15.12.1:- Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 m lead - Of area 3 sq. metres and below.

Code No.15.56:-Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.

Code No.16.117:- Supply and fixing of side hung window at all levels made out of unplasticised Poly vinyl chloride frame from approved make of natural colour with casement outer frame of size 56x48x30mm , shutter frame 66x56x30mm with wall thickness of 1.8mm (+/-0.3mm) and 5mm thick , clear glass . The gasket should be made of EPDM (Ethylene propylene dimonomer) with double gasket sealing and applying silicone sealants outside and acrylic sealent inside. The sections should be reinforced with GI sheet of 1.5mm thick with suitable drainage grouting including all necessary hardware fittings etc., all complete as per arcchitectural drawings and the engineer -in - charge.

Code No. 17.2.1:- Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever, conforming to IS: 7231, with all fittings and fixtures complete) including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid

Code No. 17.7.1:- Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630x450mm with a pair of 15mm CP brass pillar taps.

Code No. 17.9.1:- Providing and fixing Kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste complete, including paintings the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

Code No. 17.18.2:- Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231 with all fittings and fixtures complete - 10 litre capacity coloured.

Code No. 17.20.1:- Providing and fixing solid plastic seat with lid for pedestal type WC pan complete White solid plastic seat with lid.

Code No. 17.78.1:- Providing and fixing CP brass health faucet of approved quality - 15mm nominal bore

Code No. 18.7.1:- Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete (Internal work exposed on wall) -15mm nominal outer dia pipes.

Code No. 18.7.3: -Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete.(Internal work exposed on wall) - 25mm nominal outer dia pipes

Code No. 18.7.5:- Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete.(Internal work exposed on wall) - 40mm nominal outer dia pipes

Code No. 21.3.1:- Providing and fixing glazing in aluminimum door, window, ventilator shutters and partitions etc., with PVC / neoprene gasket etc., complete as per the architectural drawings. (cost of aluminimum snap beading shall be paid in basic item) : With float glass panes of 4.0mm thickness

Code No. 30.26B:- Providing and laying filter media using HBG metal of 20mm size to a required thickness

Code No. 31.160.1I:- Providing, laying and jointing UPVC pipes(Finolex/Jain) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.

Code No. 31.161.1C:- Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 63mm dia.

Baiju t a