Various Balance works in respect of AMC and H under SOPD ODS for the year 2017-2018 1Repair Renovation of Obst and Gynocology deptt 2 Pediatric deptt 3 Room in Radiology deptt 4Rcc 3 storied emergency casuality wards 5Medicine Complex

Amount

Providing and fixing flush doors shutters solid core construction with frame of 1st class hard wood etc. [b] Non-decorative type block board core. [ii] 35mm thick.

Providing fitting and fixing 40mmx48mm wood-reinforced PVC chowkhats fixed to the column……..etc.

15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level incl. arises, internal rounded angles, not exceeding 80mm girth and finished……smooth incl. curing complete as directed. [A] Fair Side. [B] In prop. 1:3.

Plain cement concrete works of 1:3:6 for footings steps, walls bricks works etc…complete. [a] In prop. 1:3:6.

Providing fitting and fixing 24mmx29mm thick polymer-reinforced molded PVC door shutters…etc. [b] 29mm thick.

[a] Removing white colour by steel wire brushing/and scraping, sand papering and preparing the wall surface etc.

Providing two coats of Birla white wall care putty after removing all loosely….complete. [i] Thickness-1.5mm thick (Approx 30% of the total quantity of cement plaster brought from the passed bill for the building]

[c]: -Applying one coat of distemper primer of approved brand and manufactures on walls surface after thoroughly brushing etc.

[F] Distempering with dry distemper of approved brand and manufacture [two coats] and of required shade on new wall surface……..complete.

[i] Extra over item no. [f], [g] and [h] above for distempering every subsequent coat of distempering with dry distemper…complete.

[e] [i] Extra over item no. [f] and [d] above for applying one coat of distemper primer/akali resistant primer …complete.

[j] Extra over item no. [f], above for distempering with dry distemper on ceiling and sloping roof.

Painting one-coat [excluding priming coat] on old ...based surface with enamel paint to give an even shade etc. [i] surface over 100mm in width and girth. [b] High gloss.

Extra over item no 13.6.5. and 13.6.6.for every subsequent coat of paint. [i] [b] High Gloss.

Painting two coat [excluding priming coat] on new steel and other metal surface etc. [b] High gloss Asian/Berger Paint.

Finishing old new wall with water proofing whether coat smooth anti fungal….exterior finish of approved brand of Asian Paint of required shades etc.

Providing fitting & fixing anodized aluminum framed glazed doors with anodized aluminum frame made of 100mm x 45mmx2.5mm section complete as directed and specified. [i] 6mm clear glass. Providing and fixing flush doors shutters solid core construction with frame of 1st class hard wood etc. of decorative type face panel and block board core. [ii] 35mm thick.

Providing fitting and fixing anodized aluminum partition walls of standard section of approved brand joint metered and welded….complete as directed. (iv) Prelaminated Board. 12x2.50x2.10=63.00m2

Preparing the RCC surface in roof slabs, chajjas, terraces, complete s directed.

Providing fitting and fixing anodized aluminum windows and ventilators of standard sections of approved brand complete as specified and directed.

[B] [iii] [i] [a] Providing Antiskid tile of approved quality, size, shape and thickness not less than 8mm on floor ….complete as directed.

{B} [iii] Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less 8mm on wall….complete as directed.

[ii] Supplying, fitting, fixing M/F suspended ceiling which includes GI perimeter channel of size…complete as directed.

Supplying, mixing, laying and applying the following water proofing system over raft, slabs, roof slab, terraces etc. incl. curing complete as specified and directed. [B] Using RHEOMIX 131 of BASF.

Retrofitting works: - Providing and applying two components epoxy resin based moister intensive low viscous Sikadur-53UF for high pressure injection grout with drilling and fixing of nozzle…complete.

15mm thick cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level incl. arises, internal rounded angles, not exceeding 80mm girth and finished……smooth incl. curing complete as directed. [A] On Rough Side. [B] In prop. 1:3.

Finishing old new wall with water proofing whether coat smooth anti fungal….exterior finish of approved brand of Berger Paint of required shades etc. [two coats].[quantity same as item No. 14/13.9.2.]

Providing, fitting and fixing in position ceiling tiles of natural fiber thermoses composite of jute polymer and chemical of Dorsum rand or equivalent as directed….

Providing and fixing in position 62mm thick double skin portion with well seasoned wood frame in size 75mmx38mm and internal frame of size 50x38mm….complete.

Providing SUN ROCK HIGH CTS/DEVI paver block /tiles of concrete gradeM-30 or above of approved quality, size, shape of specified thickness over a…complete. [a] 80mm thick.

Supply, installation, fixing of DRY CHEMICAL POWDER fire extinguisher confirming to IS:2171 with ISI mark and CO2 cartage will be confirming to IS:4947…complete.

Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick C C [1:3:6] base over one brick flat soling….complete.

Providing Vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floor etc. [a] Normal Range [vi] Marbito.

Providing plinth protection with brick flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement.

Providing & fixing Armstrong Mineral fiber Acoustical suspended ceiling system with fine fittured/classic lite [board/tegular] edge tiles…complete.

Demolishing CC floor of varous thickness etc.

Kota stone slab flooring of 18mm thick over 20mm thick base of cement plaster 1:6 ……complete.

Providing fitting and fixing M. S. Grill of required pattern for windows/clustery windows…complete.

Providing treatment of expansion joints by the following process as specified and directed by the department. [d] Providing and applying two coats of Master flex primer in both sides….complete.[ quantity same as item No. 27/5.8.1.]

Providing fitting and fixing vitreous water closet pan (Indian Type WC Orissa type [1.1.1.] Indian type WC Orissa pattern of size 580x440mm. [a] white. [ii] Hindware.

Renewing vitreous water closet squatting Pan [Indian Type] WC Orissa pattern with all fittings and fixtures complete… etc.[2.2.1.]Indian type WC Orissa pattern of size 580x440mm. [a] white. [iii] Hindware Make. White.

Supplying fitting and fixing automatic flushing cistern with all internal fittings with CI brackets etc……..complete as directed. [ii] Hindware Make. [a] White.

Providing vitreous china wash basin with CI brackets, C.P. brass chain with plug etc. [without pedestal]. [B] Hindware. [a] white. [ii] Standard.

Supplying fitting and fixing PVC pipe of 6 kg/cm2(supreme/prince) or other ISI approved incl. joining fitting and fixing………..etc. as directed. [a] In exposed surfaces or in trenches. [ii] 110mm

[iii] 90mm dia

Supplying fitting and fixing 87.5 degree PVC bend of (supreme/prince) or other ISI approved incl. joining fitting and fixing………..etc. as directed. [a] In exposed surfaces or in trenches. [ii] 110mm dia

[iii] 90mm dia

Supplying fitting and fixing PVC single Tee with door of (supreme/prince) or other ISI approved incl. joining fitting and fixing………..etc. as directed. [a] In exposed surfaces or in trenches. [ii] 110mm

[iii] 90mm dia

Supplying fitting and fixing of PVC Socket plugs of (supreme/prince) or other ISI approved incl. joining fitting and fixing………..etc. as directed. [a] 110mm

Clearance of service Septic tank and removing soil and disburse etc…complete as directed. [b] For 100 Users.

Providing and fixing CPVC pipes having thermal stability etc…complete as directed. [a] exposed in trenches. [e] 40mm nominal outer dia pipe

[c]25mm nominal outer dia pipe

Supplying fitting and fixing C.P. Bib cock 15mm dia of approved brand as directed and specified. [vi] Jaguar Make [a] Continental. [i] Standard.

Supplying fitting and fixing chrome plated (C.P.) stop cock of approved brand and size….etc.[i] Jaguar. [a] Continental. [i] 15mm dia

Supplying fitting and fixing C.P. pillar cock 15mm dia of approved brand as directed and specified. (i) Jaguar Make [a] Continental.

Cleaning and clearing the Inspection chamber which is partly filled with night soil etc….complete as directed.

Providing, fitting and fixing stainless steel kitchen sink of parry ware make with CI/MS brackets, CP brass Chain with rubber plug, PVC waste pipe etc….complete as directed.[B] NIRALI. [viii] Square plain Small.

Providing, fitting and fixing vitreous chine pedestal type water closet {European type} WC pan. [B] Hindware Make. [iii] Water closet POPULAR.

Supplying and fitting gun metal country pit valve as directed. [b] 40mm dia

[c] 25mm dia

Providing fitting and fixing mirror with plastic frame of size 500mmx400mm complete as directed.

Providing fitting and fixing CP soap tray/soap dish complete as directed and specified. [IV]American Standard. [a] Standard Soap Dish.

Supplying fitting and fixing PVC Reducer of ISI approved incl. joining, fitting and fixing etc as necessary complete at all levels.[a] In exposed surfaces or in trenches. [iii] 110mm x 90mm.

Supplying fitting and fixing PVC Single T of ISI approved incl. joining, fitting and fixing etc as necessary complete at all levels.[a] In exposed surfaces or in trenches. [ii] 110mm dia.

[iii] 90mm dia

Supplying fitting and fixing 87.5 degree PVC Bend of ISI approved incl. joining, fitting and fixing etc as necessary complete at all levels.[a] In exposed surfaces or in trenches. [ii] 110mm dia.

[iii] 90mm dia.

Renewing vitreous china pedestal type water closet with seat and lead, CP brass, hinges and rubber buffers….complete as directed. [B] Hindware Make. [a] White. [iii]Water Closet.

Renewing wash basin with CP brass chain with plug, PVC waste pipe incl. painting of brackets….complete as directed. [B] Hindware Make. [a] White. [ii]Standard.

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Medium point upto 6.00 m Length

Long point up to 10.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast or equivalent make as approved by the Deptt.) system including earth continuity. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd pin of the socket as required on the switch board in flat ISI marked casing 'n' capping system, when fitted on same board of light and fan.

Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A

Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 2 Ton capacity (Carrier make) Kurve/ Voltas make) Model PLATINUM 4S

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 5.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Overload Relay Range 6.0 -9.3 Amps for 3.7 KW

Supplying fitting and fixing industrial Plug & Socket in surface mounting SPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of DP MCB complete with making necessary connection etc. as specified and directed by the Deptt. 20A Capacity. (ABB, Schneider MG, legrand, Hager make)

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 125A

Supplying with fitting and fixing Four Pole switched neutral 415V 50Hz AC23A duty double break open execution panel mounting cubical type Switch Disconnection as approved by the Deptt.tor Fuse Unit (IP-20 protection) with HBC fuse of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.125A

Supplying, Installation, testing and Commissioning of the following indoor decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong/ Gypsum or similar ceiling mounting with necessary support with 1.5 sq. mm PVC insulated S. C. copper conductor as required and as directed by the department. 18 W, BBS 145 PIXDLED-4000 PSEAC/6000 PSE A/C/4000 PSE/ 6000 PSE Philips make LFDO plus recessed mounted down lighter with latest LED Technology or Equivalent.

Installation of Exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damages, testing, commissioning etc. as required complete

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.Domestic High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make)

Premium model 1400 mm Sweep ceiling fan (ORIENT PSPO make) /Premium model 1200 mm Sweep SS-390 Deco. Havells make)

Supplying fitting and fixing of ceiling fan regulator including connections etc. complete as required. Electronic Type type

Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories . directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department. Sleek Extruded Aluminium Channel type luminaries complete with ribbed extruded diffuser & aqua coloured flushed end caps and Electronic ballast with 1 X 18 watt Fluorescent tube18EB DAZZLE with Power Lux Lamp or equivalent ) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 3 & 1/2 Core A2XFY 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supplying and fitting fixing of electric storage water heater [Geyser] including necessary connection etc. as required complete and as directed by the Department. 10 Litre Capacity

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for , LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to .............epts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 25.00 Sq.mm 2 Core U.G. cable in 32mm dia medium duty G.I. pipe

120.00 Sq.mm 3&1/2 Core U.G. cable in 65 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 125A

Supplying with fitting and fixing LED STREET light 45W Bajaj make road Way Lighting luminaries in the exesting pole(Rate as per approved rate 0f CE,PWD Bldg Guwahati.

Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Any other un-seen item which may be required at the time of execution. Maximum Amount = Rs50,000.00 [Rate should be quoted above/below in percentage basis/As per. For example: If one quotes rate 10% above, then the rate will be 1.1 and if one quotes rate 10% below, then the rate will be 0.9 & for'As per', the rate will be 1]

O.P.GARODIA