CONSTRUCTION OF VISITORS SHED AT DISTRICT JAIL FATEHPUR

Amount

Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 g

Painting on D.P.C. with two coats of airblown bitumen 80/100 or 85/25 @ 1.7kg/Sq. M. approx including cost of fuel if any.

Providing and laying Cement concrete 1:4:8 (1cement :4 fine sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of form work etc.

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in Raft foundation Excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. 1:1.5:3

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in column., excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in RCC column in 1:1.5:3

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintel of door, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials

R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in Slab, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials

Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its was

M-150 brick work in 1:6 cement and c sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work.

M-150 brick work in 1:6 cement and sand mortar in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work thickness of walls more than one brick and for extra labour to above items

Class 150 brick work in but in 1 : 4 cement & coarse sand mortar for wall thickness 12 cm. and below, upto two floors

Proving & injecting chamical emulsion for preconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external (VI) Treatment of soil under Apron along external perimeter 5litres/sqm

Mildsteel of iron workof small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc.(when not included in an overall rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if requ Angle iron Door Chaukhat 40x40x6 mm

Mildsteel of iron workof small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc.(when not included in an overall rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if requ Fabricated Z-Section window & ventilator

Mildsteel of iron workof small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc.(when not included in an overall rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if requ Fabrication of Grill

S/F of flush door commercial qualityconforming to IS-2202 part 1 including S/Fof wooden plates stopers hinge, bolts,handle, spring & other fittings & includingpainting with two coats complete.(a) (32 mm thick) Single leaf Single Leaf

S/F of flush door commercial qualityconforming to IS-2202 part 1 including S/Fof wooden plates stopers hinge, bolts,handle, spring & other fittings & includingpainting with two coats complete.(a) (32 mm thick) Single leaf Double Leaf

Mild steel or iron work in plain work in purlins and rafters including drilling holes and fixing in postion and including supply of all steel,bolts and nut,wastage,labour and T&P etc. Required for proper completion of the work. Tuss Detail

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single ength upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Profile Seat

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws omplete : Ridges plain (500 - 600mm)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

Laying of 20 mm thick Kota stone of size 45x45 cm and above flooring over previously prepared base with 2cm thick 1:4 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc.

Laying of 20mm thick Kota stone of size 45x45 cm and above flooring over previously prepared base with 2cm thick 1:4 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc.

Providing and laying flamed finish Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawing with 18 mm thick stone slab over 20 mm (av) thick base of cement mortor 1:4 (1 cement : 4 course sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curring and polishing etc all complete as specified and as directed by the Engineer-in-charge a. Flamed finished granite stone slab Jet Black,Cherry Red,Elite Brown,Cat Eye or equivalent.

12mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (iii) 1 cement: 6 fine sand

12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (iii) 1 cement: 6 fine sand

20 mm cement plaster of mix : 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement for below plinth level

40mm thick Cement concrete floor 1:2:4 (1cement :2coarse sand :4 graded stone aggregate20mm nominal size) laid in one layerfinished witha floating coats of neat cement) Apron

Supply of glass strips for flooring . 40 mm wide & 4mm thick

Fixing Panes of glass with equal or equivalent ISI marked quantity putty brand and springs and i/c supply of all materials and labour etc complete 4mm

Painting two coats over priming coat on Wooden surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surf

Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surf

Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required dhade.New work (Two or more coat applied @ 1.43 ltr/10 Sqm. Over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Distemper with oilbound distemter of approved brand two coat and of required shade on undecorated wall surface to give an even shade over &incuding primer coat of whiting after thoroughy brushing the surface free from droping mstter including preparing the surface even &sand parpered smouth

Applying one coat of cement primer of approved brand on wall surface and finishing wall with Acrylic Smooth exterior paint

Making grooves 10 to 12 mm wide*8 mm deep in plasterof the wall or in celing vertically or horzonatally as required

P/F Alumi. Slinding door bolts 300 mm long

P/F Alumi. Tower bolts 300 mm long.

P/F Alumi. Handles 150 mm long

TOTAL COST OF CIVIL WORKS

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back half stall urinal of size 430X260X350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fit One urinal basin with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), For 100 mm dia pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729

Providing and fixing plain bend of required degree.100mm Sand cast iron S&S as per IS - 1729

Providing and fixing collar 100mm Sand cast iron S&S as per IS - 3989

Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :100mm dia

Providing and placing on terrace (at allfloor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia with 25 mm waste hole

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of Internal work - Exposed on wall 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 25 mm nominal bore

Providing and fixing brass bib cock of approved quality (a) 15 mm nominal bore

Providing and fixing brass STOP cock of approved quality (a) 15 mm nominal bore

Excavating trenches in all kind of soil ofrequired width for pipes, cables etc.including excavation for sockets anddressing of sides, ramming of bottoms,depth upto 1.5 m. including getting outthe excavated soil & then returning thesoil as required, in layers not exceeding20cm in depth including consolidatingeach deposited layer by ramming,watering, etc & disposig of surplusexcavated soil as directed within a lead of50m. a) Pipes 80mm to 300mm diameter.

Providing, laying and joining glazedstone ware pipes grade 'A' with stiffmixture of cement mortar in the proportionof 1:1 (1 cement : 1 fine sand) includingtesting of joints etc. complete. a) 100mm diameter

Providing,laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 gradedstone aggregate 40mm nominal size)alround S.W. Pipes including bedconcrete as per standard design. a) 100mm diameter S.W. Pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 brick ballast) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Soak Pit

Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth

Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete.

Class 150 brick work in 1 : 6 cement & coarse sand mortar in foundation & plinth including supply of all materials labour & tools and plants etc. required for proper completion of the work.

R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3 ( 1cement: 1.5 c.sand :3 agg. 20mm normal size ) for slabs

Mild steel or iron in plain work such as reinforcement concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel

Providing & Filling of O.B. brick ballast 25 mm to 40 mm size inside of upper layer in soak pit.

Septic Tank

Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth

Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost o

Class 150 brick work in 1 : 6 cement & coarse sand mortar in foundation & plinth including supply of all materials labour & tools and plants etc. required for proper completion of the work.

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40 mm thick floor)

R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3( 1 cement:1.5 c.sand :3 agg. 20mm normal size ) in beams .

R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3( 1 cement: 1.5 c.sand :3 agg. 20mm normal size ) for slabs

Mild steel or iron in plain work such as reinforcement concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and

15mm thick cement plaster with cement mortar in proportion of 1:3 cement & coarse sand

Foot Step (2 kg/sqm.)

C.I. Pipe (50 mm dia)

C.I.cowel.

M.H. cover of size 455x610 mm. with frame

Electrical work

Wiring point for light with 1.5 Sq mm PVC insulated multi standed single core copper conductor in heavy guage MS conduit concealed in wall.

Wiring point for fan with 1.5 Sq mm PVC insulated multi standed single core copper conductor in heavy guage MS conduit concealed in wall.

Supply and wiring of submain with 2 Nos 2.5 Sq mm FR PVC insulated multistand single core copper conductor in steel conduit.

Same as above but 2x6 Sqmm

Same as above but 2x10 Sqmm

S/F of 6 to 8 W LED Light

S/F of batten holder

S/L under ground cable 10Sqmmx 2c

S/L under ground cable 16Sqmmx 4c

S/F of Al Lugs 10 Sqmm

S/F of Al Lugs 16 Sqmm

S/ burrying of GI earth plate 600x600 mm

S/ laying of GI strip 25mmx3mm

S/ fixing of testing joint in GI strip

S/F of flush mounting SPM DB 4 way

Supply and fixing of 240 volts 'L' series miniature circuit breaker in existing MCB, DB complete with connections as required.a) 5 - 32 amps.

Supply and fixing 25 Amp. TPN miniature circuit breakers in existing MCB, DB complete in all respects as required.

S/F Ceiling fan

S/F Exhaust fan

Summersable Pump

Supply & assembling,Lowering 200mm PVC casing pipe of ISI mark

P/F 50 MM GI pipe (B) class

Nylon mesh for filter.

Plastic dori

200 mm End cap

200 mm Submersible cap

50 mm MS Clamp(Heavy)

50mm GI elbow

50x150 mm GI nipple

2HP 9m stage submersible pump of ISI mark with automatic panel

4.00 sqm Sumersible cable

Drilling charges for 400 mm dia tubewell

Pea Gravel. DSR-2018,Item No. 24.8

Rope with plastic coated

cartage of material upto site.

GST extra as applicable

K.P. TRADERS

ANUBHAV TRADERS