Providing/Fixing UPVC Windows and Doors with allied items at Forensic Science Laboratory Bemina Srinagar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area beyond 3 sqm.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Brick work in foundation and plinth with non-modular bricks Cement mortar 1:4 ( 1 cement : 4 coarse sand) INCL.carriages of all materail involved complete.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand) incl. cariage of all material involved ccomplete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered framewith in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. white colour, frame 60mm thick (min) x 90mm (min) with 1.5 mm Gl reinforcement sash 39mm (min) 58mm (min) with 1.25mm GI U section reinforcement with rubber gasket of grey/black colour 10 years warranty against VR weathering of profile with complete hardware fittings and with double air filled 5mm thick toughened glass and fiber jalli option pre-febricated on german fabrication system( mosquito sash 18mm(min) x 43mm(min) (with welled cornes) complete at site (for glazing/wire guage shutters).

Providing and fixing of U-PVC sliding/casement/fix doors in white colour, frame 60mm thick (min) x 45mm (min) with 1.5 mm Gl reinforcement sash 39mm (min) 58mm (min) with 1.25mm GI U section reinforcement with rubber gasket of grey/black colour 10 years warranty against weathering of profile with complete hardware fittings fixed with 12mm thick laminated board panels as per design and with 5mm toughened glass and fiber jalli option if pre-wars warranty against weathering of profile with complete hardware fittings fixed with 12mm thick febricated on german fabrication system( mosquito sash 18mm(min) x 43mm(min) (with welled cornes) complete at site including all fixtures.