Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹42.5 L+₹4.1 L (10.7%)Rejected-Finance | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹46.1 L+₹7.7 L (20.2%)Rejected-Finance NO 26 SRI GANESH 7TH CROSS BDS NAGAR DIBBUR RAMAIAH LAYOUT K NARAYANPURA MAIN ROAD BANGALORE 560 077 | BENGALURU URBAN | KARNATAKA | 560077 | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹48.4 L+₹10.0 L (26.0%)Rejected-Finance | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
30 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahall Bangalore 560013
REPAIRS TO CHAJJA COLUMNS BEAMS AND FACIA TO MD AND OTM ACCN UNDER AGE BR WEST AT AFS JALAHALLI
2024_MES_652042_1
8887/E8
Open Tender
Civil Works
Item Rate
181 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT JALAHALLI PUBLIC FUND ACCOUNT
₹1 L
27 Jun 2024
3 May 2024
1 Jun 2024
3 May 2024
30 May 2024
16 May 2024
3 May 2024 - 9 May 2024
Amount
M&L for providing and applying single component cement based free flowing grout with 10 mm washed aggregates; The grout shall be having non shrink property and a positive expansion of up to min 1 % in the plastic state and a flowability of 3 M at head of 250 mm for a gap width of 50 mm, developing a compressive strength of 25 MPa in 1 day & 60 MPa in 28 days, shall not bleed or segregate,having a minimum pot life of 20 minutes after which the expansion shall start, shall also developing a flexural strength of Minimum 10 MPa & bond strength of 10 MPa, It shall have resistance to dynamic loads and specimens shall not get damaged /cracked on being subjected to alternate loads of 5 MPa to 25 MPa @ 500 Cycles per minute for minimum 2 Mio cycles, It shall be chloride free and creep resistant; with epoxy bonding agent having mix density of 1.45 to 1.5 kg/ltr,compressive strength(BS-6319 PT 3)-40 MPa at 7 days bond strength (ASTM- C 881)-11 MPa at 7 days having an overlay time of 3 hrs at 30°C pouring cementitious grout into the formwork using suitable arrangement or if required using pumping device for and the bottom shuttering after 7 days ensuring proper bond between the cementitious grout and existing concrete substrate etc including all tools and tackles as per manufacturer instructions, complete all as specified and directed by Engineer-in-charge. .
M&L for providing and applying Water based co-polymer emulsion for concrete surfaces having high performance with specific gravity up to 1.02 formulated to be applied at maximum temperature of 30°C, to achieve specific performance characteristics that shall dry to a transparent finish and supplied as a single component white liquid to exposed concrete or masonry surface after proper surface preparation,cleaning of dust,dirt etc. The system shall form a film and shall have excellent water retention after film formation. It shall have coverage @8-10 sqm/lit/coat on prepared surface as per manufacturer instructions, complete all as specified and directed by Engineer-in-charge
M&L for applying 20 mm screed with single component cement based Polymer modified fibre reinforced mortar to produce a thixotropic mortar . The product shall achieve a compressive strength of 15 MPa in 1 day & 45 MPa in 28 days and a flexural strength of 7 MPa @ 7 days.cement and sand can be used for finishing purpose. It shall compensate both plastic and hardened shrinkage and have minimum direct adhesive bond strength of greater than 2 MPa. It shall be alkaline, compatible with host concrete with similar thermal properties and shall achieve a elastic modulus of minimum 25 kN/Sqmm as per manufacturer instructions, complete all as specified and directed by Engineer-in-charge
M&L for drilling hole in RCC/Bricks structures using drilling machine up to a depth of 15 mm and 18 mm dia, removing dust, etc by vacuum cleaner and blowers, providing and fixing of heavy grade GI pipe nipple 15 mm dia, 75 mm long, @ 1.0 mtr c/c in both direction and injection cement slurry mixed with liquid integral waterproofing compound confirms to IS 2645-2003. having specific gravity 1.1-1.2 gms/cc, chloride content: Nil as per IS 2645-2003 & cement modifier having specific gravity of 1.02 and -Cementations based plasticized grout admixture, @ 225 gm/50kg of cement bag through nipple and closing ends nipple epoxy putty/silica jelly after injecting the chemicals mixed with cement slurry, as per manufacturer instructions complete all as specified and directed by Engineer-in-charge
M&L for cleaning and removing all corrosion scales , rust , etc using emery / wire brush and finally cleaning using rust remover & cleaning agent that is one part alkaline based material, with corrosion inhibitors and dispersing agents and supplied as a clear brown solution. The specific gravity shall be 1.2 – 1.22 @ 25°C. The pH value shall be between 9.5 to 10. The coverage shall be 5 – 6 m2/ L, as per manufacturer instructions, complete all as specified and directed by Engineer-in-charge
M&L for MS TMT bars 8mm dia and over as in reinforcement cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends & binding with and including MS annealed wire not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge
M&L for applying 2 coats of Polymer modified primer for steel reinforcements which is a blend of Portland cements, graded fillers, corrosion inhibiting additive, and re-dispersible polymers in powder form that when mixed with water forms slurry for application by brush to cover exposed reinforcement. The product shall achieve an adhesion bond strength of 1 MPa to steel. It has got a pot life of 30 minutes @ 30°C. The touch-dry time shall be 10-15 minutes @ 30°C. The mixed density shall be 2.01-2.05. The water/powder ratio by weight shall be 0.3. It shall achieve coverage of 2 kg /Sq.Mtr @ 1.0mm thickness, applying on visible reinforcement surfaces to form a continuous film not less than 1mm thick as per manufacturer instructions complete all as specified and directed by Engineer-in-charge.
M&L for dismantling/taking down unserviceable cement plaster loose/unsound, weaken cement concrete of any description and in any position from existing internal/External surfaces with power driven , pneumetic chisel and removal to outsides MOD land complete all as specified and directed by engineer-in-charge.
M&L for providing and fixing welded MS wire mesh weighing not less than 1Kg/Sqm of size 50mmX50mm of 2.6mm dia on the prepared surface & surface should be cleaned and be removed from dirt, fungus and all foreign material, complete all as specified and directed by Engineer in Charge.
M & L for curing of the surface using low viscosity emulsion which incorporate a special alkali reactive emulsion breaking system. It shoud be non-penetrating continuous filmcomplies with the internationally recognized ASTM C309-90 standards including all tools and tackels complete all as specified and directed by Engineer-in-Charge @ 250gms/Sqm. Product should have daylight Reflectance of 70% as per ASTM E-1347 as per manufacturer instructions, complete all as specified and directed by Engineer-in-charge.
M&L for providing filling epoxy putty into crack after opening up cracks in V-groove manner approximate 5 x 5mm size using mechanical cutter,properly cleaning the same to remove loose dust dirt etc and filling the same using three component,solvent free,Thyxotropic,Epoxy resin based putty having 100% solid contents,density of 1.64-1.68 gm/cc,comprehensive strength @7days- 50N/mm², pot life 40 minutes at 25°C,drying time 8 hrs at 25°C. Recoatable time 24 hrs after finishing in line and level with existing concrete surface etc. as per manufacturer instructions complete all as specified and directed by Engineer-in-charge
M&L for applying 2 coats of epoxy bonding agent for proper bonding between old surface with micro-concrete/new surface.The bonding agent shall be a two component solvent free epoxy supplied as ready to use at site. The product shall have a minimum pot life of 120 Min at 35°C and an open time of atleast 4-6 Hours @ 30°C up to which new concrete can be poured. It shall develop a minimum compressive strength of 40 MPa and a bond Strength of 11 MPa complete all as specified and directed.
M&L for form work to sides and soffits of lintels, beams, columns, shelves, chajjas including overhangs etc for fair finished flat surface complete all as specified and directed by Engr-in-charge
M & L for applying 2 coats thoroughly Water based Aliphatic Acrylate Anti-Carbonation coating Co-Polymer Emulsion over exposed concrete or masonry surfaces @ 5 Sq.m / Litre / 2 Coats, having high performance, excellent crack bridging ability and shall bridge cracks up to 2 mm width,Elongation at Break : 220%, Tensile Strength : 0.7 MPa, Hardness : Shore "A" Scale of 80 , Adhesion Strength : 3.4 Mpa UV Resistant,Water Vapour Permeability : 40 Grams / Sq.m / Day algae and fungus resistant, Aliphatic Acrylate to give resistance to long term weathering, having resistance to aggressive elements like efflorescence and lime blooming, good adhesion on all cement plasters, capable for hide surface undulations and fine surface cracks including preparation of surface, cleaning of dust, dirt etc. as per manufacturer instructions complete all as specified and directed by Engineer-in-charge
M&L for treating the existing pipe penetrations using non-shrink, free flowing, cementitious grout .The compressive strength of the grout must exceed 50 N/mm2 at 7 days and 60 N/mm2 at 28 days. The flexural strength of grout must exceed 9N/mm2 @ 28 days. Fresh wet density of the mixed grout must exceed 2150 kg/m3. Further flashing the area using solvent based UV resistant polyurethane based waterproofing material having minimum tensile strength on 4 N/mm2 and minimum elongation of 800%. as per manufacturer instructions complete all as specified and directed by Engineer-in-charge.
M&L for applying two coat of mixture of two monomer unsaturated liquid hydrocarbon , gaseous hydrocarbon and polymesrized them to get the high polymer dispersion emulsion successfully bonded to mortar, to improve adhesion to concrete, better durability, reduced shrinkage and increased flexibility and resistant to emulsification in damp condition modified Ensuring no porosity in new/old surface, temperatures between +5°C and +35°C, Resist to penetration of CO2 4.600 micron , compressive strength (11.5 N/mm2) at 3 days strength - 11.5 (N/sqmm ) and at 28 days - 25.30N/sqmm as per manufacturer instructions complete all as specified and directed by Engineer-in-charge
M&L for applying Polyster Resin based Anchoring material in concrete before fixing nozzle it should typically attains a compressive strength in excess of 20N/mm @ 3 hours and ultimate compressive strength of 70N/mm in 7 days (50mm x 50mm x 50mm)when tested as per BS 6319 Part 2 : 1983 as per manufacturer instructions complete all as specified and directed by Engineer-in-charge.
Note: for item No. 1 to 20:- The work for items Srl No 1 to 20 shall be executed directly by manufacturer or through their authorized and qualified applicators,of any following manufacturer only. M/s Sika India Pvt Ltd, M/s Fosroc chemicals, M/s Thermax Limited, M/s Choksey Chemicals Pvt, M/s BOSTIK India Pvt limited.
The contractor must submit MOU with manufacturer/authorized applicator at the time of sample approval.
The contractor shall submit performance guarantee certificate for structural repair/leakage/seepage for a period of 10 years from the certified date of completion.
The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto 15 mtr height from natural ground level.
The defect liability period for the structural repair work shall be 05 (five) years from the certified date of completion of work.
A security deposit of value equal to 2.5% of the rate quoted against each item shall be retained from Final bill payment due to the contractor for the defect liability period.
The unit quoted rate is deemed to include for taking down of water pipe, tanks, wires etc found on roof or other working areas and re-fix same at the original position after completion of work.
Adoption of necessary safety arrangement like safety belts, ropes, helmet, netting etc are required for safety of working labour at height exceeding 3 to 15 mtr shall be mandatory & deemed to be included in the unit quoted rate
Taking down chowkat or frame (wooden/steel/Alumnium) not exceeding 1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
S&F in Steel windows with side hung shutters including projecting type hinges, frame with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50Sqm each pane complete all as specified and directed.
S&F frosted glass 4.0mm thick, pin head type n exc 0.5 sq.m in each pane and fixed. complete all as specified and directed.
Petty repairs to MS windows n. exc 3 sqm including taking down and refixing the same of window glass, hacking out old putty or removing beads etc, and reputtying all glass and painting/oiling puttied surface to match existing work and including taking down and refixing the same position, complete all as directed and specified. Note:-(i) The unit quoted rate shall be inclusive of material,any helght of any size and all labours, tools and plants including scaffolding, safety helmet, rope required for working upto approx 15 mtr height from natural ground level and nothing extra shall be admissible on this account.
M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane complete all as specified and directed.
Material and labour for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm including taking down existing one complete all as specified and directed.
Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding 4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed.
Taking down shutters of any description exc 1.0 Sq.m and n.exc 2.0 Sq.m each complete all as specified and directed.
M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Supply and Fixing 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and directed.
S&F Factory made 35mm thick Glazed and skeleton shutters for windows/doors, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); all as specified and directed.
Preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.
Supply and fixing 200 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed.
S&F aluminium handles cast type anodised 200 mm long complete all as specified and as directed.
S&F 250mm aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminum alloy and fixed complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm including taking down existing one complete all as specified and as directed.
S&F Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads in section area 6 sq.cm but not exc 13 sq cm including taking down exisiting one complete all as specified and as directed.
Removing plant/Uprooting of vegetation growth including roots on wall/roof/parapet near pipes etc and applying acid treatment after removing roots for preventing regrowth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface complete all as specified and directed.
Taking down MS window shutters n. exc 1.5 Sqm through cutting of existing any type of hinges, handle and tower bolt and fixing new box type hinges, MS handle and MS tower bolt the same window by welding. The quoted rates shall be included the following aspect:- (a) Cutting of existing piano hinges, handle and tower bolt from window frame and shutter. (b) Fixing of removed shutter in the same frame on MS box type hinges 100mm, MS handle 100mm and MS tower bolt 100mm by welding. (c) Easing and adjusting the shutter before re-fixing if required. (d) Finishing the window frame and shutter with two coat of synthetic enamel paint. (e) Necessary scaffolding material to be included as the building height is more than 10mtr. Note : Box type hinges, handle and tower bolt will be measured separately as supply only and labour element is deemed to be included in this item.
Supply only MS Box type hinges 50mm size complete all as specified and directed.
Supply only MS Handle 100mm size complete all as specified and directed.
Supply only MS tower bolt 75mm long complete all as specified and directed.
S&F in repairs Stainless steel peg set of having 5 pegs powder coated fixed to wall surface with PVC plug and screw complete including taking down all as specified and as directed.
Supply and fixing in repair steel window handles with nuts and bolts or with screws including welding/fixing with nuts complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair steel window peg stay including welding/fixing with nuts complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair steel window hinges as per sample by welding complete all as specified and directed by Engr-in-charge. Note :- An amount of Rs 2490.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/s R.D. Company
SRI GANESH ENTERPRISES
M/s Raghav Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .