Special repair to building no P 60 Single Officer Accn P 61 P 62 Staff room Servent room and renovation of washroom Under AGE BR II GE Faizabad

Amount

M&L Water proofing treatment on RCC roof of (Multistorey Bldg) etc, comprising with the following operation & as specified here :- Dismantling of brick tiles or terracing tiles single layer on roof , complete all as specified.

All as per item no. 1 but Demolition of mud in roof any thickness including plastering and leeping (whether full thickness removed or only part there of ) , complete all as specified.

All as per item no. 1 but M&L for cement concrete type B-0 , 1:2:4 (12.5 mm graded crushed stone aggregate) for roof Padding , complete all as specified.

All as per item no. 1 but M&L for 10 mm thick plastering in cement mortar 1:3 finished even & smooth with out using extra cement with water proofing compound , complete all as specified. Note:WPC measured and paid seperately.

All as per item no. 1 but Applying evenly a tack coat of industrial bitummen 85/25 at the rate of 1.20 Kg per Sqm including cleaning surfaces complete all as specified.

All as per item no. 1 but A layer of APP bases polymeric membrane 3 mm thick (minimum) weighing 3.0 Kg per Sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction.

M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, , complete all as specified.

M& L for 40 mm brick tiles laid on 15 mm thick bedding layer in CM (1:4) mixed with WPC (WPC shall be measured and paid seperately) over water proofing membrane and pointed flush in CM (1:3) with linseed oil @ 5% by wt of cement , complete all as specified.

All as per item no 8 as above but except brick tiles

Supply only liquid water proofing compound ISI marked , complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm bore , complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore , complete all as specified.

Refixing old steel tubing 15 mm bore and connections in new or old position (Wall, floor etc.) , complete all as specified.

Refixing old steel tubing 20 mm bore and connections in new or old position (Wall, floor etc.), complete all as specified.

S & F 15 mm bore GI tubing medium grade with all fittings and fixed complete to walls or laid in floors , complete all as specified.

S & F 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls or laid in floors , complete all as specified.

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc., complete all as specified.

M&L for rendering 15m thick cement plaster on other than fair faces of brick work or concrete surfaces CM (1:6) finished even and smooth without using extra cement , complete all as specified.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surface even and smooth without using extra cement , complete all as specified.

Preparing of old painted surface of wall applying two coats of oil bound distemper over priming of Chalk whiting, complete all as directed

M&L for preparation of old decorated surface of ceiling and applying one coats of whites wash, complete all as specified.

M&L for preparation of new plaster of wall and applying two coats of oil bound distemper over 1mm thick wall care putty and primer on plaster surfaces, complete all as specified.

M&L for prepararion of new plastered surfaces of wall and applying two coats of cement base paints over a coat of cement primer , complete all as specified.

M&L for M&L for preparation of old decorated surface of wall applying one coats of cement base paint on external wall surfaces , complete all as specified.

M&L for preparation of old surfaces applying two coats of Appex paints on projection surfaces of coloumn,facia ,fin of chajja etc , complete all as specified.

Dismantling of PVC water storage tank exc 250 and not exc 500 ltrs capacity and removing to store , complete all as specified.

S&F 500 ltrs capacity Rotational moulded polythene water storage tanks in three layers (cylindrical vertical with close top) hoisted and fixed in position all as specified in SSR Part-I , complete all as specified.

Disconnecting existing tanks of capacity exc 250 & n.exc 500 ltrs, setting aside (or lowering if required) for repairs, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position , complete all as specified.

S&F as in repairs 20/25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe fixed , complete all as specified.

Taking down chowkhats or frame (with shutter w/o taking of shutter from frame exc 1.5 sqm but n.exc 4 sqm each.), complete all as specified.

Taking down chowkhats or frame (with shuuter without taking of shutter from frame n. exc 1.5 sqm each , complete all as specified.

Taking down Shutters of any description exc 1 sqm but n.exc 2.0 sqm each each, complete all as specified.

S & F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed

S & F 35 mm thick 2nd class HW rail and styl Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section , complete all as specified.

S&F 150 mm long aluminium handles, cast type, anodised , complete all as specified.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy , complete all as specified.

M&L preparing of new surface of wooden surface and applying two coats of synthetic enamel paint over one coat of pink primer on new wood based surface exc. 10 cm width or girth, complete all as specified.

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture of 1.40 mm fixed with stainless steel staples, complete all as specified .

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 125 X 60 mm, complete all as specified.

S &F for solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to match the printed sheets reinforced with MS square tube complete all as specified & shown on drawing.

S&F for Factory made solid PVC moulded with particle board core doors shutter 28 to 30 mm thick(syles) with 2,4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front panel and 2 mm plain colour PVC sheet on back face, suppling & fixing in the frame at site as per specification & drawing.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified complete all as specified .

S&F Aluminium handles extruded type ,anodised of 150 mm size complete all as specified .

S&F 100 mm size butt hinges medium weight cold rolled stainless steel complete all as specified .

S&F for 250 mm size aluminium sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate , complete all as specified .

S&F for 300mm long MS ordinary rat tail rod pattern spring including roller and roller plate , complete all as specified.

M & L for PCC 1 : 2 : 4 Type B-0 ( 12.5 mm graded crushed stone aggregate) in filling under pressed steel door frame,lintel upto 1.5m clear span,cill, steps,seismic and other similiar bands, plinth courses,string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating , complete all as specified.

S&F overall length of cover 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in repair in floor complete all as specified .

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish of the premises

M&L screed bed or bedding layer of mortar (1:6) 15mm thick for laying floor finises of tiles , complete all as specified.

M&L for rendering 10mm thick in CM 1:4 on verticle surfaces of wall for fixing of wall tiles, complete all as specified.

M&L for glazed ceremic coloured tiled in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified.

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified .

M&L for 8 to 10mm thick (square) non skid colour heavy duity tiles (Endura) tiles of size 300mmX300mm, in floor complete all as specified .

Supply and fix bib tap, two way bib tap chromium plated, screwed for iron pipe or brass ferrule, 15 mm bore and fixed in repairs, complete all as specified .

S&F in repair 15 mm bore pillar tap, cast copper alloy with capstan heads chromium plated , fancy type , screwed for iron pipe or for brass ferrule complete all as specified

S&F For PVC connection 15mm bore 450mm long hexagonal brass chromium plated nuts and washers on both sides complete as specified .

S&F in repair 15mm angle valve , chromium plated with long shank high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union , complete all as specified .

S & F vitreous china wash hand basin, white, flat back, size 550 X 400 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread) min weight 32mm-45 Gms/40mm-60Gms), complete all as specified .

S & F in repairs vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in lime concrete etc complete including making good to floor , complete all as specified.

S&F in repair for 10ltrs PVC valveless,syphonic action type flushing cistern low level white with inlet,ball valve,float and handle including brackets , complete all as specified.

S&F anodised aluminium sections in any of door, windows and ventilator etc including fabricator of frame shutter and fixing with necessary glazing clips, joining cleats etc., complete all as specified .

S & F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section sweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Hinges type B-21100mm long (2 no.) suitable handle (2 no.) complete all as specified.

S&F Steel window with side hung shutters including box type hinges with Z section, steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete with glazing bar dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed by Engr-in-charge.

S&F Steel window with side hung shutters including box type hinges with Z section , steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete without glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified .

S&F steel ventilator with top hung shutter including hinges steek peg stay including one coat shop zinc chromium primer, complete all as specified .

M & L for Framed work such as grills, grating doors or gates etc. of angle with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of watertanks and similar work confirming to Fe 290.complete all as specified .

S&F in repair Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified .

S&F Gun- metal, globe or gate valves with iron wheel head,screwed both ends for iron pipes for 20mm bore of pipe complete all as specified .

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips, complete all as specified .

Supply only 4mm thick glass pan ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane, complete all as specified .

S & F 4mm thick glass pan ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane, complete all as specified .

S&F in repair pre laminated particle board 18/19mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to nails for working table/storage almirah/kitchen shelf and cupboars shutters, complete all as specified .

S & F 40 mm width of flap when open continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified .

Dismantling of stone slab and tiles laid on dry of any description or thickness in floors,aprons etc complete all as specified.

M&L for machine pressed precast concete interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified .

M&L for Sand filling cushion under paver block 30mm thick including watering and consolidation, complete all as specified .

Demolition of concrete in ground floor, roof,pavings nexc 15cm thickness including floor finishes like tiles if any of any description, complete all as specified .

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C-2 using ( 40 mm graded crushed stone aggregate) as in sub-base of floors, plinth protection finished the surface of concrete fair and even, complete all as specified .

M & L for preparation painting new steel surfaces of any description over 10cm width or girth not other wise described with two coats of synthetic enamel paint , complete all as specified.

Preparation of old plastered surfaces of walls and applying two coats of oil bound distemper on wall to obtain smooth surface, complete all as specified .

S&F in repair Chromium plated fancy type Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses mixture of standard quality for mixing hot & cold water, with all the fitting etc , complete all as specified. Make Jaguar ORP-10011BPM or equivalent as approved by GE

S&F in repair Single leaver wall mixture 3 in 1 System with Provision for both Hand shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) of standard quality including all necessary fitting , complete all as specified. Make Jaguar ORP-10125PM or equivalent as approved by GE

S&F chromium plated OHS 180 mm dia round shape songle flow (ABC Body chrome plated with grey face plate) WITH Rubit cleaning system shower including all necessary fitting as per manufacture instruction , complete all as specified . - Make Jaguar OHS -1759

S&F in repair Rimless Single piece-WC with UF soft close seat cover, Hinges,Fixing Accessories, Accessories Set and Cistern fittings, Size: 390x710x720 mm,, including connection to trap and drain , complete all as specified .Make -Jaguar Modle no VGS-WHT-81853S300UF or equivalent as approved by GE

S&F for wash hand basin with PVC VANITY 24 " including waste pipe, waste cupling with all fitting complete all as specified and directed .Make -Somany or equivalent as approved by GE

S & F glass encloser cat no JSE-CHR 81000680F22X DOOR WITH WALL GLASS HINGES complete all assecceary as required , complete all as specified . Make - Jaguar OHS-CHR-1649 or equivalent as approved by GE

S&F in repair 15 mm bore CP fancy type Bib Cock with Wall Flange , scewed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified. Make - Jaguar ORP-10037PM or equivalent as approved by GE

S&F in repair 15 mm bore Angular Stop Cock with Wall Flange screwed down both ends for iron pipe fixed , complete all as specified .Make - Make - Jaguar ORP-10053PM or equivalent as approved by GE

M&L for joint free (600mm x 1200mm) x8 to 10 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified.

M & L for Virified double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M & L for MONOSET PUMP (GM) CFMSMB5D1-00-v24 as approved by GE, complete all as specified.

S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces, complete all as specified. Make Prayag Cat No BA 88 or equivalent as approved by GE

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard , complete all as specified .

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm. , complete all as specified .

S&F in repairs Health faucet with ,1 mtr long flexible tube with wall hook complete all as specified.Make Prayag Cat No BEA 85 or equivalent as approved by GE

S&F in repair Brass chromium plated towel rack , fixed in repair , complete all as specified ..Make Prayag Cat No BA 02 or equivalent as approved by GE

S&F in repair stainless steel grating 100mm square/round with or without hole , complete all as specified .

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches , complete all as specified

Taking down carefully aluminium point wiring 1.5 Sq mm of complete,switch socket 5amps & power point etc including switches and making good distured surfaces of walls / ceiling etc all as specified.

M & L point wiring for one light point/fan point controlled by one, one way switch using 1.5 Sqmm nominal cross sectional area multistranded copper conductor,FRLS PVC insulated unsheathed cable in and including 20 mm dia or higer size PVC concealed conduit and fittings with 1.5 Sqmm nominal cross sectional area used as continuous earth wire and connected to earth dolly including metal flush boxes with white cover plate and making neccessory electrical connection of modular type Switches, sockets,regulators etc for One light point or fan point controlled by one switch , complete all as specified .

All as per item no. 103 but for One 3 pin socket outlet 5 amps on same board with other switches

All as per item no. 103 but for One 3 pin socket outlet 5 amps socket outlet independent but below the switch board of light point in the same vertical plane

M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit/PVC casing caping of adequate size with all fittings and accessories including PVC sunk box with 3mm thick plastic laminated sheet top cover complete including FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one 16 Amp socket outlet on independent board.

S & F switch piano flush type one way 6 Amps, complete all as specified .

S&F switch piano, flush type, one way, 16 Amps , complete all as specified .

S & F switch piano flush type 2 way 6 Amps, complete all as specified .

S & F socket outlet 5 pin, 6 Amp flush type, complete all as specified .

S&F socket 2 in 1, 3 pin, 5 and 16 Amps flush type , complete all as specified .

S & F ceiling rose surface bakelite three terminals , complete all as specified .

S & F stepped type electronic fan regulator flush type , complete all as specified .

Supply & fix bell /ding dong 230 volts Ac single pole , complete all as specified .

M & L for point wiring with 1.5 Sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit/PVC casing caping of adequate size with all fittings and accessories including PVC modular sunk box with modular cover plate with frame of suitable size including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One light/fan point controlled by one,one way switch, complete all as specified .

All as per item no. 115 but for One bell point controlled by one bell push

All as per item no. 115 but for One socket outlet point 6 A on independent board

All as per item no. 115 but for One socket outlet point 6 A on same board

M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FR PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit/PVC casing caping of adequate size with all fittings and accessories including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including PVC modular sunk box with modular cover plate with frame of suitable size including one run of FR PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for 16 Amp socket on independent board, complete all as specified .

S&F Modular Switch 1 way, 6A, 1 module, complete all as specified .

S&F Modular Switch 1 way 16A, 1 module, complete all as specified .

S&F Modular socket 6A, 2/3 pin combined 2 module, complete all as specified .

S&F Modular socket 16A, 2/3 pin combined 2 module, complete all as specified .

S&F Modular bell push flush type 6 A, 1 Module , complete all as specified .

S&F Modular fan regulator 120 W, 2 module, complete all as specified .

Supply & Fixing plug and DBOX MCB Protected Socket complete with 25A MCB DBOXX COMBO DP, 240 volts single phase for AC , complete all as specified . Cat No:-DHDMCDP0253025 Make :- Havells/Bajaj/ Anchor or equivalent as approved by GE

Supply and fixing bldg security light LED 20 Watt , IP 66, including provisioning of Siutable size of GI bracket , clamp and nut and bolt etc including PVC insulated twested wire 3 core 23/0076 cooper conductor flexible PVC insulated wire, complete all as specified .

M & L for Sub main wiring complete with two run of 4 sqmm ( nomoal area) single core ( Using colour code for phase & Neutral and one run of 2.5 sqmm ( nominal area) single core Green in colour as earth continuity conductor to common earth dollyPVC insulated multistranded copper conductor 1100 volts FR grade drawn through PVC casing & caping including taking down the existing submain wiring complete all as specified and directed. Note :Two runs of 4 sqmm ,one run of 2.5 sqmm size& one run of casing caping cable shall be measured as one length

M & L for Sub main wiring complete with four run of 10 sqmm ( nominal area) single core ( Using colour code for phase & Neutral and two run of 6 sqmm ( nominal area) single core Green in colour as earth continuity conductor to common earth dolly PVC insulated multistranded copper conductor 1100 volts FR grade drawn through PVC casing & caping including taking down the existing submain wiring complete all as specified and directed. Note:- Four runs of 10 sqmm ,Two run of 6 sqmm size& one run of casing caping cable shall be measured as one length

M & L for Sub main wiring complete with four run of 6 sqmm ( nominal area) single core ( Using colour code for phase & Neutral and two run of 4 sqmm ( nominal area) single core Green in colour as earth continuity conductor to common earth dolly PVC insulated multistranded copper conductor 1100 volts FR grade drawn through PVC casing & caping including taking down the existing submain wiring complete all as specified and directed. Note . :- Four runs of 6 sqmm ,Two run of 4 sqmm size& one run of casing caping cable shall be measured as one length

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required complete all as specified and as directed.

S&F epoxy powder coated MCB, DB, double door TPN horizontal 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall , complete all as specified .

S&F epoxy powder coated distribution box SPN 4 way, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal door , complete all as specified .

S&F MCB, 4 pole, 63 A, 16 kA, 'C' curve, complete all as specified .

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall , complete all as specified .

M & L MCB SPN 32 Amps 240 volts, complete all as specified .

M & L MCB SP-32 Amps 240 volts , complete all as specified .

S&F LED tube light fitting,1X18 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting , complete all as specified .

S & F in repair lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings , complete all as speicfied.

S&F LED tube light fitting,1X10 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use paclk fitting including provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting, complete all as specified .

Supply and fixing Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver, complete all as specified .

M&L for making hole in wall suitable for fixing of exhaust fan 300 mm sweep and making good disturbed area of wall to matching with existing wall surface complete all as specified including removing rubbish off the premises.

M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.

Taking down old unserviceable service connection/UG cable of size, complete all as specified .

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil , complete all as specified .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil, complete all as specified .

Removing excavated materials (soil) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point , complete all as specified .

M & L for sand cushioning to underground cable with clean dry river sand, complete all as specified . Note:- Punned thickness only shall be measured & Paid.

Supply & Laying of sub class 'B'bricks locally available best quality laid flat (length of bricks laid across the length of cable) in tranches for protection of U/G cable , complete all as specified .

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified .

disha construction

ABC CONSTRUCTION CO

M/s SHIVAM CONSTRUCTIONS

MISRA TRADING CORPORATION

Khan Brothers

JYOT BUILDERS

His And Her Enterprises

K R KAUSHAL AND SONS