Repair to Canal Distributory/Minor Head Regulator Gate of Size-0.9 x 0.9 Mtr -2 No at dy 74 of Paithan Right Bank Canal by replacing with Ductile Iron Double Flanged Double Eccentric Butterfly Valves-900 mm-1No,Manufacturing, providing ,Erecting MS

Dismantlling of Stem Rod, Hoist & Skin Plate by Gas cutting and refitting of same of Canal Gate of size 0.90 x 0.90 Mtr - 1 No. Complete with cost of sundry material and labour charges with leads & lifts at site etc complete,. (WRD Mechanical CSR 2023-24 Abstract-Canal gate-A-3)

Providing and supplying D.I. pipes (push on joints pressure) pipes of D. I. of following class and diameter-900 mm confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by WRD including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed. (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/revision with amendments for Rubber Gaskets).(IS:8329-2000 Latest Version) D.I. K-9 (WRD CSR 2023-24 LIPDN-25 Section 12.16)

Hydraulic testing of D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. (WRD CSR 2023-24 LIPDN-28 Section 12.19)

Providing and applying Primer Red Oxide Paint in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. Complete as directed.(WRD CSR 2023-24 MR-10 Section 11.10), External Surface area of pipe = 3.14x0.920x10 = 28.76 Sq mtr Internal Surface area=3.14x0.9x10=28.26, Total Surface Area = 28.76+28.26 = 57.02 Sq Mtr

Providing and applying anticorrosive coal tar black paint IS 290-1961 in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. Complete as directed.(WRD CSR 2023-24 MR-11 Section 11.11) External Surface area of pipe = 3.14x0.920x10 = 28.76 Sq mtr Internal Surface area=3.14x0.9x10=28.26, Total Surface Area = 28.76+28.26 = 57.02 Sq Mtr

Lowering, laying and jointing in proper grade and alignment D.I. pipes with cost of all jointing materials (rubber packing, nut bolts, etc.) including cost of conveyance from stores to site of works, all labours involved, etc complete. Only SBR rubber Gasket to be used as per IS 5382 and IS 12820 (for all class of pipes) (WRD CSR 2023-24 LIPDN-26 Section 12.16)

Providing, supplying & erecting of approved make Ductile Iron Double Flanged Double Eccentric Butterfly Valves.in accordance with EN 593 /BS 5155 /IS 13095 /API 609 with Body & disc of Ductile Iron confirming to EN1563/ GGG40 / IS 1865 Gr. 400/12, Body seat of PTFE seated with Stainless Steel backed , disk seat of S.S. AISI 304/316 , Shaft of S.S. AISI 420(Dry Shaft Design , (to ensure 100% drop tight shut off as per EN Std suitable for drinking water application), Internal fasteners of Stainless Steel . Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) to DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shut-off.Leakages not allowed. Flange drilling as per IS 1538/ IS 9523/ASME B 16.5 / EN1092-2 raised face. Testing as per EN 12266-1&2. Features required for Butterfly valves will be suitable to water work application for continuous operation up to 70 degree Celsius as per above general specification or otherwise the standard BS 5155 / EN593. (Butterfly Valve PN-1 -WRD-CSR- 2023-24-LIPDN 65-Section 12.57)

Providing, erecting and commissioning M.S. Dismantling joint PN 1.0 as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia.(WRD CSR 2023-24 LIPDN-69 Section 12.61).

Excavation for foundation in earth, soil of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By /manaual Means ) for Foundation Block Size 500x500x600-2 No

Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap / granite/ quartzite/ gneiss metalin foundation including necessary centering, form work, bailin gout water, compacting and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) PWD SSR 2022-23 BR 5A item no 12.25 Foundation Block Size 400x400x500-2 No

Manufacturing & Providing Anchorages 12 mm Dia 600 mm Long-8 No ,Anchor Plate 600x400 mm-2No,Saddle Support Flat 2/3 of perimeter 1890x100x5 mm-1No includes cost of material, machining, machinery, labour and sundry material etc complete (RA Attached)

Manufacturing, providing and erection of Trashrack Pannel 1.2 x1.2 Mtr-1 no includes cost of material, machining, machinery, labour and sundry material etc complete. (RA attached)

Erection Charges for Erection of MS conduit Pipe,Valve etc (RA Attached)

construction of Valve Chamber 1.5 x 1.5 M internal size and depth upto 1.5 M with S.F.R.C. frame and cover of size 540 mm dia. fixed in RCC slab.including excavation for foundation in earth, soil of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.

Crane Charges for Handling Material

Transportation Charges for Transportation of material,Machinery,Labour from nearest district place beed to site- 75 Km to and fro 150 km- 6 Trips