Repair of Road in area of AGE B/R-II under GE (West) JRC

Amount

M& L for Preparing old existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 5kg/10 sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 30mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as specified and directed.

M & L for applying a tack coat of paving bitumen VG-10 @ 5Kg/10 Sqm of road surface complete all as specified and directed.

M & L Premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with paving bitumen VG-30 complete all as specified and directed.

M & L for Repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @ 9.8 Kg Per Ten Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and directed.

Material & Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre line /stop lines /dashes, arrows etc. and the like n exc 10cm width on road pavements with hot thermoplastic road marking paint of approved colour conforming to BS-3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed.

Supply and fixing solar delinators made of polycabonate & toughened Auminium alloy body of 80mm dia, height of pole one mtr comprises of 4 ultra bright flashing LEDs including 30cm x15cm size block of PCC (1:2:4) type B1 using 20mm graded stone aggregate. Make : Dark Eye Cat Part No DA 112 or equivalent.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 or equivalent fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer in Charge

S&F High quality ABS Plastic Speed Bump height 50mm Fixing on road with two highly reflective reflectors moulded in HDPE material are welded with ABS plate having high resistance capacity to withstand severe impacts. Make : Dark Eye Cat Part No DA 1009 or equivalent.

J.K & Company