REPAIRS TO MISCELLANEOUS STEEL AND WOODEN FURNITURE OF ARTY CENTRE UNDER GE NASIK ROAD

Amount

Part - I - Wooden Furniture Portion :- Repairs to Bed Ply wood top

Taking down UNSV head board complete from the bed and S/F new head board made out of 1st class HW duly french polished on both side of head board all as specified and shown in Drg.

All as per Item No.1.01 above but for foot board of bed.

Taking down unserviceable worm out long rail of bed and suppply and fix new long rail of bed made out of 1st class HW (Indian Teak ) made to same shape and size all as per shown in Drg.

Removing of old unserviceable worn out ply wood top and batten from bed hard and supply and fix new batten 910mm long of size 35 x 60 mmx 2 Nos and ply wood 12 mm thick BWR grade commercial ply wood of required size fix with screws and polishing complete bed after repair to all schedule as specified and directed by Engineer-in-Charge. The ply wood shall be in single peace as per drg No-FD-246/247. Make of Plywood Kitply / Assam Power / Anchor.

Removing of old unserviceable worn out vineer from both side form the existing Head rest of the bed ply and fixing the new vineer of same size and shape and polishing complete Head rest after repair.

Removing of old unserviceable worn out vineer from both side form the existing Foot rest of the bed ply and fixing the new vineer of same size and shape and polishing complete Foot rest after repair.

Repair to Sofa set 4 /5 seater

Supply & Fixing New Cushion of same size and shape ( 21"x 22" x 4" ) with 40 density along with tapestry with Chain, as specified and shown in drg (Rate of Tapestry shall be not less than Rs 250/- per mtr)

Supply only New Coushion Cover of tepestry Cloth with chain of size (21"x 22" x 4" ) as specified and shown in drg (Rate of Tapestry shall be not less than Rs 250/- per mtr) Cloth will be approved by Enger -in-charge.

Removing old UNSV side rails of chair and S&F new side rail made out of 1st class HW (India Teak) duly French polished all as specified and directed by Engineer-in-charge.

All as per Item No. 2.03 above but Long rail and front rails of Three seater Sofa

All as per Item No. 2.03 above but back rail and front rails of Sofa chair

All as per item No 2.03 above but stiffeners of Sofa chair

Repairs to Chair Writing

Removing old UNSV side rails of Seat of chair writing and S&F new side rail made out of 1st class HW (India Teak) duly French polished all as specified and shown in drg.

All as per Item No. 3.01 above but back rail and front rails of Seat of chair writing.

All as per Item No. 3.01 above but front legs of chair writing

All as per Item No. 3.01 above but rear legs of chair writing

All as per Item No. 3.01 above but stiffeners of chair writing

All as per Item No. 3.01 above but batten of back rest of chair writing

All as per Item No. 3.01 above but arms of chair writing

Tightening of Chair Writing all as complete including Bamboo pin and Screws duly French polished all as specified and shown in drg.

Repair to Chair Dining

Removing old UNSV stiffeners of chair dining and S&F new stiffeners made out of 1st class HW Indian teak duly French polish complete all as shown in drg.

All as per Item No. 4.01 above but side rails for chair dining

All as per Item No. 4.01 above but back rails and front rails for chair.

All as per Item No. 4.01 above but front legs of chair dining

All as per Item No. 4.01 above but rear legs of chair dining

All as per Item No. 4.01 above but batten of back and rest for chair dining

Tightening of Chair Dinning all as complete including Bamboo pin and Screw duly French polish complete all as shown in drg.

Removing old UNSV/Broken PVC Seat of chair dinning JCOs/Ors and providing & Fixing new PVC Seat to chair dining JCOs/Ors duly French polish complete all as specified on drawing and as directed by Engineer-in charge

Repair to Chair Easy

Removing old UNSV side rails of seat of chair easy and S&F new side rail made out of 1st class HW (India Teak) duly French polished complete all as specified and shown in drg.

All as per Item No. 5.01 above but back rails and front rails for chair easy

All as per Item No. 5.01 above but back Side of chair easy

All as per Item No. 5.01 above but back rails and front rails of Back of chair easy

All as per Item No. 5.01 above but front legs of chair easy

All as per Item No. 5.01 above but rear legs of chair easy

All as per Item No. 5.01 above but arms of chair easy

Tightening of Chair Easy all as complete including Bamboo pin and Screw duly French polish complete all as shown in drg.

Repair to Table Bed Side

Removing the unserviceable /broken top of table bed side and providing/fixing new top made out of 18/19mm pre-laminated particle board including French polishing for beading complete as specified and as directed.

All as per item No 6.01 above but Shelves of table bed side.

All as per item No 6.01 above but left / Right Side of table bed side

Repair to unserviceable worn out back of table bed side by providing /fixing 6mm thick new commercial ply wood duly french polished complete all as specified and as directed .

Repair to Teapoy

Removing the UNSV worn out top of teapoy and providing new top of size 610 mm x 450 mm made out 18 mm thick pre-laminated particle board including 4 mm thick teak beading around the table top complete duly French polished and fixing with necessary screws to frame all as specified and directed by Engineer-in-Charge.

Removing unserviceable worn out legs of teapoy and supply and fix new legs made out of 1st class HW (Indian teak) made to shape and size duly French polished and fixed with glue and bamboo pin all as specified and directed by Engineer-in-Charge.

All as per Item No. 7.02 above but side rail of teapoy.

All as per Item No. 7.02 above but front /back rail of teapoy

Repair to Table Peg

Removing worn out unserviceable top of table peg and providing new top of size 460 mm x 310 mm made out of 18 mm pre-laminated particle board including Teak Wood beading around the table top and fix with necessary screw to frame complete all as directed by Engineer-in-Charge

Removing unserviceable worn out legs of peg tables and supply and fix new legs made out of 1st class HW (Indian teak) made to shape and size duly French polished and fixed with glue and bamboo pin all as specified and directed by Engineer-in-Charge.

All as per Item No. 8.02 above but front/back/side rails of peg tables.

Repair to table 900 x 600 x 760 mm with & without Drawer

Removing UNSV worn out top of table and S&F new top made out of 18/19 mm thick pre-laminated particle board size 900 x 600mm including 4 mm thick 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.

Removing UNSV worn out legs of table and S&F new legs, made out of 1st class HW (Indian Teak) made to shape and size duly French polished fixed with glue and bamboos pin all as specified and shown in drg.

All as per Item No. 9.02 above but front /back rails of table

All as per Item No. 9.02 above but side rails of table

All as per Item No. 9.02 above but stiffeners of table

Removing old UNSV drawer of table and supply and fixed new drawer as per same size and shape

Repair to Table dining 1200x900mm

Removing UNSV worn out top of table and S&F new top made of 18 mm thick pre-laminated particle board of size 1200 x 900mm including 4 mm thich 1st class hard wood teak edging all round of table top complete all as specified and shown in drg.

Removing UNSV worn out legs of table and S&F new legs made out of 1st class HW (Indian Teak) made to shape and size as per drg duly French Polished, fixed with glue and bamboos pin complete all as specified & shown on Drgs.

All as per Item No. 10.02 above but long rails of table dining.

All as per Item No. 10.02 above but short rails of table dining.

Repair to Table Dining for 6 / 8 pers

Removing UNSV worn out top of table and S&F new top made of 18 mm thick pre-laminated particle board of size 1500 x 900mm including 4 mm thich 1st class hard wood teak edging all round of table top complete all as specified and shown in drg for 6 Pers

Removing UNSV worn out legs of table and S&F new legs made out of 1st class HW (Indian Teak) made to shape and size as per drg duly French Polished, fixed with glue and bamboos pin complete all as specified & shown on Drgs (for table 6 persons)

All as per Item No. 11.02 above but long rails of table dining 6 persons

All as per Item No. 11.02 above but short rails of table dining 6 persons

All as per Item No. 11.01 above but Top size 1800x900 mm table dining for 8 persons

All as per Item No. 11.02 above but for table dining for 8 persons

All as per Item No. 11.03 above but for table dining for 8 persons

All as per Item No. 11.04 above but for table dining for 8 persons

Repair to Table writing

Removing old unserviceable worn out top of table and providing and fixing new table top size 1145 x 600mm made out of 18mm thick pre-laminated particle board with teak veneer natural finish one side with and including 4mm thick teak wood beading all-round including tightening the same as directed by Engineer-in-charge.

Removing unservice/worn out legs of table writing and S&F new legs made out of 1st class HW (Indian teak), made to shape and size, duly French polished , fixed with glue and bamboos pins all as specified & as directed.

All as per item No.12.02 above but stiffener short of table writing

All as per item No.12.02 above but stiffener long of table writing

Repair to unserviceable worn out back side of table Drawer portion by providing/fixing new 6mm thick commercial plywood to table writing french polished complete all as specified & as directed .

Repair to unserviceable worn out sides of table of drawer portion by providing/fixing 4mm thick Teak Veneared plywood to table writing incl french polish complete all as specified and as directed.

Removing of unserviceable worn out door shutter of table writing and providing and fixing new door shutter made out with 18mm thick particle board teak veneer natural finished one side complete including 4mm thick 1st class teak wood beading including required size piano hinges all round to shutter with 40mm dia powder coated MS knob with one magnitic door catcher including french polishing to shutter all as specified and as directed.

Repairs to table dressing gents with mirror

Removing UNSV worn out mirror with frame of table dressing gents and S & F new mirror of size 760mm x 380mm x 5mm thick, Make : Modi/Saint Gobind including back side covered with 6mm thick plywood and teak wood frame duly French polished all as specified and as directed.

Repair of UNSV Drawer of Table dressing Gents supply and fixing of new drawer of same size and shape

Repairs to Table Dressing Ladies

Removing UNSV worn out mirror with frame of table dressing ladies and S & F new mirror of size 1220mm x 380mm x 5mm thick, Make : Modi/Saint Gobind including back side covered with 6mm thick plywood and teak wood frame duly French polished all as specified and as directed.

Repair of UNSV Drawer of Table dressing Ladies supply and fixing of new drawer of same size and shape

Repairs to Side Board

Removing the unserviceable /broken top of Side Board and providing/fixing new top made out of 18/19mm pre-laminated particle board including French polishing for beading complete as specified and as directed.

All as per item No 15.01 above but Shelves of side board.

All as per item No 15.01 above but left / Right Side of Side board.

Repair to unserviceable worn out back of side board by providing /fixing 6mm thick new commercial ply wood duly french polished complete all as specified and as directed .

Removing all UNSV knob of side board and supply and fixing new steel knob of same size and shape

Removing UNSV drawer of Side board and Supply and fixing new drawer of same size and shape.

Repairs to Table Centre

Removing the UNSV worn out top of Table centre and providing new top of size 900 mm x 450 mm made out 18 mm thick pre-laminated particle board including 4 mm thick teak beading around the table top complete duly French polished and fixing with necessary screws to frame all as specified and directed by Engineer-in-Charge.

Removing unserviceable worn out legs of Table centre and supply and fix new legs made out of 1st class HW (Indian teak) made to shape and size duly French polished and fixed with glue and bamboo pin all as specified and directed by Engineer-in-Charge.

All as per Item No. 16.01 above but side rail of Table centre

All as per Item No. 16.01 above but front /back rail of Table centre

Repairs to Mirror dressing gents MAP

Removing UNSV worn out mirror with frame of table dressing gents and S & F new mirror of size 1170 x 560x5mm thick, Make : Modi/Saint Gobind including back side covered with 6mm thick plywood and teak wood frame duly French polished and fixed it on shelf box with 2 nos 100mm MS Butt hinges all as specified and as directed.

Repairs to Table dressing Ladies (MAP)

Removing UNSV worn out mirror with frame of table dressing laides MAP and S & F new mirror of size 1220x420x5mm thick, Make : Modi/Saint Gobind including back side covered with 6mm thick plywood and teak wood frame duly French polished all as specified and as directed.

Repairs to Chair Dinning Officer (Map)

Removing old UNSV stiffeners of chair dining and S&F new stiffeners made out of 1st class HW Indian teak duly French polish complete all as shown in drg.

All as per Item No. 19.01 above but side rails for chair dining

All as per Item No. 19.01 above but back rails and front rails for chair.

All as per Item No. 19.01 above but front legs of chair dining

All as per Item No. 19.01 above but rear legs of chair dining

All as per Item No. 19.01 above but batten of back rest for chair dining (Lehariya Pattern/ Curve Shape )

Supply & fix New Coushion of Chair Dinning Officer along with tepestry Cloth fixed with 6mm wooden bottom ply of exixting size as specified and shown in drg (Rate of Tapestry shall be not less than Rs 250/- per mtr) Cloth will be approved by Enger -in-charge.

Tightening of Chair Dinning all as complete including Bamboo pin and Screw duly French polish complete all as shown in drg.

Removing old plastic cane from position and recaning with white/yellow colour plastic cane of 1.8mm wide x 0.40 mm thick as per Godrej pattern to the wooden furniture such as Chair Dinning, Writing , Easy, Stool Dressing etc.

Part - II Steel Furniture Portion :- M&L for scrapping of old paint & applying putty and making smoothing of surfaces complete before painting and applying one coat of red oxied (Steel primer) & two coats of synthetic enamal paint of olive green by spray painting of the following steel furnitures. These shall be carried out in offrs/JCOs/ ORs md accn, Offices and unit lines at AOP & NRC areas and BSO Furniture yard under GE NRC:-

Almirah Large steel

Almirah med Steel

BED Side Locker

Table office officers steel

Table office clk steel

Book Case steel verious size

Rack of all size

Prepairing of smooth surfaces by scraping/sand papering and applying two coats of french polish of superior quality of make "Sheenlac" to the following wooden items of furnitures. These shall be carried out in offrs/JCOs/ ORs md accn, Offices and unit lines at AOP & NRC areas and BSO Furniture yard under GE NRC

Almirah large with shelves

Almirah med with shelves

Bed Plywood top

Bin soiled linnen

Chair Easy

Chair dinning

Chair Dining FD Coushioned

Chair writing

Hat stand with mirror

Table writing

Table dinning 6 pers/8 pers (MAP)

Table centre

Peg Table

Tepoy (FD/DB)

Sofa set 4 seater/5 seater

Stool Dressing

Table dressing Gents w/mirror

Table 900mm x 600mm with drawer

Table 900mm x 600mm with out drawer

Table Office Clerk

Table Writing

Table dining 1200mm x 900mm

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS 59,531.50 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/s. SHRI SAINATH ENTERPRISES

M/s SK Construction

Bidder Name

M/s Rajesh G Ramsinghani

M/s. SHRI SAINATH ENTERPRISES

M/s SK Construction