ADDN ALTERATION OF BOUNDARY WALL IN FRONT OF BDLG NO P190 OF INF BN NO TWO AND OTHER SANCTIONED WORKS UNDER GE BRICHGUNJ SRI VIJAYA PURAM

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified.

M&L for PCC in foundation filling and mass concrete type C2 1:3:6 (40mm graded stone aggregate) all as specified.

S&F MS steel work in tubular, trusses incl purlins, special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade 240 all as specified.

M&L for plates of plain or chequered, square cut or notched of steel welded to steel structure for base plate etc.

M&L for prepainted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of colour having tesile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified.

M&L for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of colour having tesile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces over 10cm width or girth all as specified.

Rough excavation not exceeding 1.5 m deep and getting out in hard/ dense soil all as specified.

M&L for hard core of guage n.exc.63mm using broken stone aggregate spread, levelled, watered and rammed to a true surface.

M&L for 100mm thick PCC 1:3:6 type C2 all as specified.

M&L Removing excavated soil to a distance n.exc 50 m and depositing as directed

Material and labour for Machine pressed precast concrete interlocking paver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, over and including 50mm consolidated thick sand cushioning including watering and consolidation for base/ bed all as specified a complete all as specified and as directed

Demolition of PCC block masonry built in cement mortar all as specified and as directed.

Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

M/L for PCC 1:4:8 type C2 using 40 mm graded aggregate as in foundation complete all as specified.

M&L for Pre-cast PCC block masonry type B-1 (1:3:6) with solid block exc. 10cm width and setting in in CM1:6 complete all as specified.

M&L for rendering 15mm thick on concrete surface in CM 1:4 finished fair surfaces even and smooth without using extra cement complete all as specified.

Forming V grooves in plaster n.exc. 10mm deep and n.exc. 10mm on face complete all as specified.

M&L RCC 1:2:4 type B1 using 20mm graded stone aggregate for band etc.

M&L for Form work for flat edges of concrete for works like RCC band exc 10 cm and N exc 20 cm complete all as specified and as directed

S&F Mild steel TMT bars10mm dia and above as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for two coat of cement base paint over one coat of chalk white primer incl prepartion of the surfaces complete all as specified.

M&L Surface dressing n exc 15 cm deep and getting out in soft loose Soil complete all as specified.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) 100mm thick as in sub base of foot paths, pavements etc finishing the surface even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for 300 x 300mm heavy duty exterior grade parking tiles of 10mm thickness , set, jointed and pointed in neat cement slurry, including screed bedding layer in cement mortar 1:6, 20mm thick, in flooring, complete all as specified and as directed Make - Johnson Endura tiles or equivalent as approved by GE.

Dismantling of posts or struts (wood, steel or RCC) of any section along with old, unserviceable barbed wire, if any, including taking out embedded portion from ground and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified

M&L for high strength corrosion resistant TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and as directed.

Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm all as specified and as directed.

Supply only 6mm dia wire PVC coated for support/ line wire to chain link fencing, complete all as specified and as directed

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) all as specified and as directed.

Supply only mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Supply only mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for circuit wiring complete with two runs of 1.5 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 1.5 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix energy efficient aluminium housing LED batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, B series all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out (A) Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

S&F 50 mm bore GI pipe light grade with all fittings laid in trenches all specified and directed..

Material and Labour for cutting bituminous road at a width not more than 30cm and a depth not exceeding 60 cm for laying of pipes on road crossing for cable protection and making good with cement concrete 1:2:4, type, B-2 to match the existing surfaces of the road all as specified and as directed by Engineer in charge.

M/s G K Enterprises (BID ID -3394289)

M/S R R ENTERPRISES (BID ID -3392793)

M/s B S Engineering (BID ID -3394701)

Gulmarg Electrical Service (BID ID -3393770)

Nirman Construction Company (BID ID -3394078)

MAJUMDAR FURNITURE (BID ID -3394677)

M/s Ramesh Lal (BID ID -3395201)

Bismi Builders & Enterprises (BID ID -3394299)