Renovation work of all EandM equipments at Jaitpur no. 2 pumping station under Central zone.

Amount

Dismantling of pump set of any capacity- 7 Nos., DG set- 1 No., piping arrangements, electric panel, starters and other items and shifting the same to Indraprastha (IP) pumping station and after required repairing works, re-shifting all the equipments to Jaitpur no. 2 pumping station. The work includes cutting of nut bolts, removing the electrical connection of all equipments, transportation tools and tackles such as tripod arrangement or crane by skilled labour including loading/ unloading etc. complete as required.

Providing and fixing of M. S. Black pipe confirming to IS: 3589 Gr. 330 with packing sheets etc. as required of following dia:-

250 mm (8 mm thickness)

500 mm (8 mm thickness)

Providing and fixing of M. S. Blank Flange fabricated with required nut, bolt, packing sheet etc. as required of following Dia.

250 mm (16 mm thickness)

500 mm (16 mm thickness)

Providing and Fixing of M. S. Flange with required nut, bolt, packing sheet etc. as required of following Dia.

Providing and Fixing of M. S. Bend with required nut, bolt, packing sheet etc. as required of following Dia.

250 mm, 8 mm thick, 0.5 mm long

500 mm, 8 mm thick, 1 m long

Supply of corrugated & chequered rubber mat for electrical purposes exceeding IS: 5424/ 69 Black or Red in 1 M X 2 M of size.

25 mm thickness

S&F of compartmentalized cubical type panel board duly powder coated made out of 16 SWG MS sheet with insulated Alluminium bus bar i/c interconnection copper wiring arrangement for mounting for switch gears, changeover switches, MCCB i/c making the foundation brick work/ angle iron frame on floor/ wall with proper locking arrangement, voltmeters, ammeters, fuse indication lamps, etc. complete as required at site.

Depth 30 cm to 60 cm

Providing and fixing of Anti-vibrating cushy foot mounting of following size

S-Series

Supply, installation, testing and commissioning of fully automatic Star Delta Motor Starter in sheet steel enclosure Type MN with Single Phase Protection feature complete as required.

Supply installation testing and commissioning of self supporting totally enclosed cubical type tool box, epoxy powder coated made out of 3 mm thick CRCA sheet of 90 cm height, 90 cm length and 45 cm depth hence total compartmentalized tool box= 9 Nos, size 1 feet x 1 feet x 1.5 and provision of locking arrangement and front openable shutter complete all as required at site

Providing and fixing following rating and breaking capacity MCCB with adjustable thermal & adjustable magnetic setting with rotary handle in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

400 Amp, having breaking capacity 50 KA (Icu), four pole

100 Amp, having breaking capacity 30KA (Icu), four pole

Supply of XLPE insulated PVC sheathed Aluminium conductor armoured cable 1.1 KV conforming to IS: 7098/ (Part-I) of following size

4 core 300 sqmm

Supply of XLPE insulated PVC sheathed copper conductor armoured cable 1.1 KV conforming to IS 16 sq mm 3 core complete all as required at site

4 core 16 sqmm

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing masonary open duct as required. Above 185 Sq mm and Up to 400 sq.mm.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing masonary open duct as required. Up to 35 sq.mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle).

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 300 sq. mm (70mm)

4 X 16 sq. mm (28mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required..2x2.5 sq.mm +1x2.5 sq.mm earth wire

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2x 4 sq. mm + 1 x 4 sq. mm earth wire

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.4 x 4 sq. mm + 2 x 4 sq. mm earth wire

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and fixing following way, triple pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way, Double door

Supply and fix 6 amps. to 32 amps. ratings, SP MCB, “C” curve, 10 KA breaking capacity

Supply and fix 63 amps., 4 pole isolator complete all as required at site

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S.I.T.C. of 150 W LED flood light luminaries fitted with lens made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as required (b)Total system voltage =150 watt +/-5% (c) Luminiare Efficiency =100 Lm/w(d) Power Factor >=0.95 ( e) Protection Class- IP -66

S.I.T.C LED tube type luminaire 20 watt rating complete with extruded aluminium batten prewired with high efficient LED with the following specifications.(A) Total system wattage 20 watt+/- 5% ,(B) Luminous efficiency >= 95 Lumens/watt, © Power factor >= 0.95

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Providing and fixing of 600 mm sweep Air circulator complete with blades, jaal workable on 220/240 volts AC supply etc as reqd.

Providing of 450 mm sweep pedestal fan complete with blades, base plate, supporting rod, jaal workable on 220/240 volts AC supply as required 450 mm, power 65 watt Air delivery 85 CMM, RPM 1380.

Supply of 15'' (380mm)sweep 1400 rpm exhaust fan heavy duty complete with shutters blades etc as reqd.

Installation of exhaust fan in the existing opening including making good the damage, connection, testing, commissioning etc. as required.(a) Up to 450 mm sweep.

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.

All works upto plinth level (For 6 nos. pump sets 0.7*2*0.8 = 1.12 cum each i.e. 6.72 cum for all 6 pump sets).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-50D or more

Installation, testing and commissioning of electrical motor pump set, dismantled at serial no. 1 above, complete all as required at site.

Servicing and overhauling of engine of 125 KVA rating DG set by replacement of following spares and other required job works as required complete in all respects.

Hose set (Radiator)

Hose Clamp (Radiator)

Diesel filter

Lube oil filter

Air Filter

Lube oil (10 Ltr pack)

Coolant 5 Ltr pack

Kit Air Cleaner Element

Connection Water outlet

Clamp, Hose

Hose, Plain

Inhibitor Corrosion 5 Ltr Pack

External accessories

Belt V

DG set job work

Fuel Pump- towards the fuel pump calibration & testing charges

Nozzle- towards the Nozzle calibration & testing charges

Dismantling defective radiator of DG set of any capacity and repair/ maintenance including welding of defective portion, leak testing, etc. and re-fixing in its original position after repair complete all as required.

Servicing and overhauling of alternator of 125 KVA rating DG set by replacement of following spares and other required job works as required complete in all respects:

Towards the charge for alternator servicing, Major overhauling & Health Checkup of winding with following work dismantling, greasing of bearing etc.

Battery Lead set 12 Volt

Fabrication of MS channel base frame for mounting the electric motor pump sets by using 2 nos. of 150x75 I-section beam of approx. 5 feet length on either side and supported by 3 nos. 150x75 I-section beam of approx. 1.5 feet length on both ends and in between of equal spacing complete as all required with painting, nut bolts, fixing etc.