AR AND SR FOR NON RESIDENTIAL BUILDINGS OF GOVT. MODEL SR. SEC. SCHOOL SECTOR 22 A CHANDIGARH FOR THE YEAR 2025-26 CHANDIGARH.

Providing and fixing 4mm thick plain glass panes with beading when required over existing chowkhat or glazed shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and apply cement based putty (Birla, JK or equivalent) to required finish complete in all satisfaction of Engineer in Charge.

Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of Alum hinges, all necessary Alum fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2"x3/4" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 2 nos. 3" hinges, 2 nos. Aluminium tower bolts 4", Aluminium handles 1 nos., I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and laying vitrified floor tiles of size 600 x 600 mm single charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Single charge vitrified tile of size 600x600 mm

Providing and fixing IRC welded steel wire fabric of size 3"x1" wire of 12 gauge in existing angle iron frame properly welded to the frame with the help of existing MS Flat 25x5mm beading by cutting to the required size, straightening and pirmer in position complete in all respect and to entire satisfcation of Engineer-in-charge.

Providing and fixing of M.S. angle iron frame of size 5’-4-1/2” x 2’-6” (for fixing of IRC fabric) having outer frame made out of angle iron of size 40 x 40 x 6mm M.S. flat 20 x 3mm as beading to hold the IRC fabric in position. The M.S. frame is welded to box type vertical post with two no M.S. ring of 3” dia made out of M.S. flat 40 x 5mm. The vertical box post of 3’-4.1/2” long made out with 2 no M.S. angle iron of size 40 x 40 x 6mm welded to each other having 6” long hold fast of the same material at bottom are grouted on the top of boundry wall in PCC 1:2:4 of size 9” x 9” x 9”after making recess in existing boundary wall. 4” long M.S. pieces having sharpened edged made out of M.S. flat 40 x 5mm are welded to the top member of the frame @ 3” c/c. It also includes the cost of two coats of first quality black paint (of duly approved brand) over one coat of steel primer as per as per Drg first no 309 Job no M - 16 complete in all respect and to the entire satisfaction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Please Enable Macros to View BoQ information