Completion of balance works for Addn/Altn to kitchen cupboards, hot water supply and their misc works in SMQs at AF Stn Sirsa

Amount

Demolition Cement Concrete (Reinforced) of Roofs, Floors (other than Ground Floors), Beams, Staircases, Landing, Chajjas and similar Suspended Work (Reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

M&L for Cutting Holes in Brick Walls, not exc. Half Brick built in Cement Mortar for inserting of Cooler Stand, Lugs, GI Tubing and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded crushed stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate for Slab supported wall, column , kitchen counter slab, shelves and similar articles with plain faces complete all as specified.

M&L for TMT bars 8 mm dia cut to length bent to shape required including cranking bending sprirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Non-skid Coloured Ceramic Tile 400x400x7.0 to 8.0 mm thick in Flooring, set and jointed in Neat Cement Slurry and pointed in White/ Coloured Cement, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:3, complete all as specified and as directed.

M&L Machine cut Granite Stone Slab (Black in colour) 18-20mm thick, fixed on Kitchen Platform, Floor or on Shelves, laid over and including Cement Screed 15mm thick in Cement Mortar 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Machine cut Granite (Black in colour) Tiles 18-20mm thick in skirting/dado laid over rendering 10mm thick in Cement Mortar 1:4 cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed. NOTE : Cost of rendering shall deem to be include in the Quoted Unit Rate.

M&L for Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L preparing newly Plastered surfaces of walls and applying three Coats of White Wash, complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash complete all as specified and directed.

M&L preparing old decorated surfaces of Walls including cornices etc.by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash complete all as specified and directed.

M&L preparing old Distempered surfaces of Walls including cornices etc.by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of acrylic distemper complete all as specified and directed.

S&F for 15 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, complete all as specified and direced.

S&F Sink with Drainage Board made of Stainless Steel 1.0mm thick Kitchen overall size 915x460mm having Bowl size 405x350x205mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed-in-repairs, complete all as specified and as complete all as specified and as directed.

S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges and fixed, complete all as specified and as directed.

S&F coloured PVC Board Scratch and strain free (weight not less 9 Kg/Sqm or having density os 600Kg per Cum) in Door, Shelves for Cup Boards or Kitchen Cabinets, one side plain & other side laminate(Wood Grain Finish), 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & ixing of stainless steel L shaped hinges suitable for 18/19mm PVC board (minimum of 02 Nos for each leaf) to hold cabinet shutter, stainless steel silver chrome door Handle 100mm long (01 No for each leaf of shutter) and door catcher (01 no for each leaf) complete all as specified and as directed. NOTE : Quoted unit rates are inclusive of PVC board handles, hinges, screws, door catcher and adhesive etc .

M&L for Drilling of hole not less than 25mm dia in Granite for passage of gas pipe etc, complete and all as directed by Engineer in Charge.

M& L Formwork to cooking platform, shelves and similar item including edges for rough finished flat surfaces of concrete complete all as specified and directed by Engineer-in-Charge.

M/s Satguru Traders

shiv shanker enterprises

Ajay Enterprises

YESH BUILDERS