Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.7 L+₹1.1 L (5.71%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹18.6 L
EMD Value
₹37,200
Closing Date
18 Jul 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer-I(Bldg), DNH,Silvassa
PWD Campus Block No.I(B),DNH, Silvassa
Special repairs to Type V -C bungalow at tokarkhada.
2022_UTDNH_6031_1
E-TENDER NOTICE NO.11 OF 2022-23 (BLDG)
Open Tender
Civil Works - Buildings
Item Rate
30 days
UT of DNH
As per NIT refer
3 documents required · 3 mandatory
₹500
Executive Engineer-I(Bldg), DNH,Silvassa
₹37,200
26 Sept 2022
6 Jul 2022
18 Jul 2022
6 Jul 2022
18 Jul 2022
6 Jul 2022
Amount
Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.
Dismentling steel work including distempering and stacking the materials with all lead and lift.
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
Desmatling false celling including disposal matrial with all lift and lead
Providing material and labour for fixing ISI marked flush door shutters conforming to IS:2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick and indian teak wood franes 12 cm x 7 cm including ISI marked Stainless steel butt hinges with necessary screws, with providing & fixing decorative high pressure taimax laminated sheet of plain/ wood grain in gloss/ matt/ suede finish (timax urban 5481sf)with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality 1.0 mm thick on both face, with providing and fixing SS tower bolts (barrel type) with necessary screws etc 200 mm long x 10 mm dia, with providing and fixing SS door Aldrop with necessary screws etc 300 mm long x 16 mm dia, Providing and fixing SS door Aldrop with necessary screws etc 250 mm long x 16 mm dia, with Providing and fixing SS pipe handle for door 45 cm size on both side of Door shutter, with providing and fixing SS hanging type floor door stopper with necessary screws etc. complete as directed by Engineer- in- charge. All SS shall be ASIS 304 Grade
Providing and fixing extruded aluminum window having extruded aluminum Colour Powder Coated section frame main outer size 127mm x 38.1Omm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,verticaI member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.
Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window
Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above plinth level upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Specification
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
Providing material and labour for fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil manual
Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- Graded brick bat aggregate 40mm normal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders Bressumers and Lintels exceeding 1M.in Depth.
Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.
Providing and laying controlled cement concrete M.200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (B) COLUMNS:(i) Having cross-sectional area 0.05 to 0.08 Sq.M
Providing and laying controlled cement concrete M.200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M
Providing and laying controlled cement concrete M.200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M
Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,Ianding,sheIves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level.
Providing and laying controlled cement concrete M.200 exposed work with curing etc. complete including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (B) COLUMNS:(i) Having cross-sectional area 0.05 to 0.08 Sq.M
Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete
Providing TMT Bar FE 5OOD reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level
Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.
Providing Material and labour for applying "Dulux dimnd tuchl" paint icludig cost of lapi and putty work ad cleaning of surface.
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete apex
Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oiI,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.
Providing and fixing glass panalig 10mm thinkkglass with nassesury assaseris clamp and fill silicone matrial.
Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.
Providing and fixing 903 Jaquar Wash Basin Table Top
Providing and fixing 551pn Jaquar Ewc P Trap with Pp Normal Seat Cover
Providing and fixing WASH BASIN BLACK + WHITE MATT
Providing and fixing 963UFSM Rimless Wall Hung WC with UF soft close slim seat cover, Hinges,
Providing and fixing 5273upr Jaquar Wall Mixer with Provision O/h Shower
Providing and fixing 079 jaquar Concealed Body for S/l High Flow Doverter
Providing and fixing 85079K JAQUAR S/ EXPOSED PART KIT HI FLOW -ALI
Providing and fixing 85429 Jaquar Bath Spout with Wall Flance - Alive,
Providing and fixing85021 JAQUAR PILLAR COCK 135MM
Providing and fixing 5021n Jaquar Pillar Cock Tall - Flr
Providing and fixing 705 Waste coupling 32mm Size Full Thread
Providing and fixing 769l300x190 Jaquar Bottle Trap with Long Pipe
Providing and fixing 85041 Jaquar 2way Bib Cock - Alive
Providing and fixing 5041N Jaquar 2 Way Bib Cock with Wall Flance -
Providing and fixing Flr jaquar Hand Shower (Health Faucet) ALD-CHR-573 85053 Jaquar Angular Stop Cock - Alive
Providing and fixing 85053 Jaquar Angular Stop Cock - Alive
Providing and fixing 5053N JAQUAR ANGLE STOP COCK - FLR
Providing and fixing 233 Jaquar Concealed Body for S/l Basin Mixer
Providing and fixing 85233k Exposed Part Kit of S/l Basin Mixer Jaquar A
Providing and fixing 1095n Jaquar Metropole Valve Regular 32mm
Providing and fixing 1605 Jaquar Over Head Shower
Providing and fixing 1999 Jaquar Over Head Shower Mu
Providing and fixing 477 Jaquar Shower Arm Casted 190mm Round
Providing and fixing 455l400 Jaquar Shower Arm 400x25x25mm
Providing and fixing Toilet Roll Holder with Stainless Steel Flap. Make: Jaquar 35753
Providing and fixing toilet Soap Dispenser with Metallic Bottle. Make: Jaquar ACN-1137N
Providing and fixing Towel Rack 600mm long with Lower Hangers, Stainless Steel. Make: Jaquar AKP-35781PS
Providing and Fixing Swivel Mirror 630 X 445mm Rectangular Shape. Make: Jaquar AKP-35795
SITC of CFMSMB5D1.00-V24 MONOSET Single Booster Centrifugal Water Pump (1 hp) Single-phase Water Pump, In-built Thermal Over Load Protector, Power Rating: 0.75 kW, Power Supply: 220V (+6%-15%), 50 Hz, Motor Power: 1 hp. Make: CROMPTON
Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories Cat. I
Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories - Cat. I
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (C) with oval conduit /PVC casing capping double lock type (b) 2 wire 2.5 sq. mm
Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (C) with oval conduit /PVC casing capping double lock type (a) 2 wire 4 sq. mm
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed
Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c )63 Amp. Cat. III
providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (iii) 63 Amps. FP Cat.III
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (ii) 6 way
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (v) 16 way
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge. (22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete
Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.
Unique builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .