Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.5 LAccepted-Finance | L1 | Accepted-Finance Lowest | |
| 2 | L2₹24.9 L+₹1.4 L (5.76%)Rejected-Finance NO 1 HPPWD DIVISION DHARAMSHALA HIMACHAL PRADESH | L2 | Rejected-Finance Other Than Lowest |
Tender Value
₹17.6 L
EMD Value
₹35,117
Closing Date
17 Apr 2023, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer HPPWD Bharmour
Executive Engineer HPPWD Bharmour
Construction of Panihara Ardhhanganga Chhourasi Temple Bharmour in District Chamba H.P
2023_PWD_71881_2
PWCB/GA/22-23 21435-534 15.3.23
Open Tender
Civil Works
Item Rate
365 days
Bharmour
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
₹35,117
Yes
12 Jun 2024
6 Apr 2023
21 Apr 2023
6 Apr 2023
17 Apr 2023
6 Apr 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as per the entire satisfaction and direction of Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars, Piers, Abutments, Posts and Struts up to all width and heights including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals
Providing and laying in position mechanically mixed and vibrated cement concrete of specified grade excluding the cost of centring and shuttering in all work upto plinth level with cement concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre) nominal size) and curing complete as directed by the Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals. The rate is including royality, Malkana,Toll tax, sale tax, GST or other taxes imposed by the Government.
Providing Coursed rubble masonry (first sort) with hard stones in foundation and plinth with cement mortar 1:6 (one cement isto six coarse sand) and curing complete as per directions of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Govt.
Stone soling/boulder filling dry hand packed in under floor as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying & Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying upto floor level reinforcement concrete work of grade M-25 (M-Twenty five) 20mm ( Twenty millimetre nominal size ) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 400 Kilogram (four hundred kilograms) michanically mixed and vibrated including curing complete but excluding the cost of reinforcement , centering, shuttering upto plinth level, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.
Reinforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less than 400 Kilogram (four hundred kilograms) michanically mixed in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, huttering, finishing and reinforcement as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Steel reinforcement TATA TISCO/SAIL of thermo-mechanically treated bars of grade fe-500 (Fe-five hundred) or more for reinforced cement concrete work including strengthening, cutting, bending, binding and placing in position complete and binding all complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Upto Plinth Level
Above Plinth Level
Random rubble masonry with hard stone in Superstructure plinth including levelling up with cement concrete 1:6:12 (one cement isto 6 coarse sand isto twelve graded / crushed stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (One cement isto six coarse sand) and curing complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level to all floor level in all shapes and sizes in CM 1:6 (one cement isto six sand) and curinf complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (One cement is to two Sand is to four graded stone aggregate 20mm( Twenty millimeter ) nominal size) to give a smooth and even surface including centring and shuttering all plinth work including complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and Laying Chamba stone flooring 50mm ( Fifty milllimetre ) (Average ) Thickness of stone laid over 25mm ( Twenty millimetre ) thick cement mortar bed of 1:4 ( One cement is to four sand ) including pointing with cement mortar 1:3 9 One cement is to Three sand ) The rate is inclusive of all operation , material and required pattern as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing amd Laying stone work for wall liningetc( Veneer work ) 40mm thick ( Forty millimetre thick ) cement mortar 1:3 ( One cement is to three sand ) including pointing white cement 1:2 ( One white cement is to two stone dust ) with admixture of pigment direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
15mm (Fifteen millimeter) thick cement plaster in ceiling with cement mortar 1:6 (One cement isto six sand) for all heights as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Finishing walls with Premium emulsion paint of Asian Paints/ Nerolac Suraksha nerolac paint, Berger paints, Dulux paint of approved shade having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm (at the rate one point four three litre per ten square metre), within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Wall painting with Two coats premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour , within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero litre oblique ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero litre oblique ten square metre) of approved brand and manufacture, within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing 35mm (Thirty Five millimetre) thick pre-painted steel sheet ceiling with prepainted limpet and rubber washers complete with all accesoriees as required, within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing ridges 0.80 mm thick ( Zero point Eighty millimetre thick ) with zinc coating not less than 275 gm/m² ( Two hundred Seventy five gram per metre square ) or hips of width 60 cm ( Sixty cenitimetre ) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia ( Eight millimetre dia ) G.I. limpet and bitumen washers complete.within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing plain M.S. B.P. sheet 1.66 mm to 2 mm ( One point sixty six millimetre to two millimeters) of TATA/ SAIL/ Reliance/ Jindal steel in eaves board/facia/ soffits ceiling including cutting, fixing and welding to steel rafter, member and applying a coat of red lead primer with gas/electric welding in position complete (frame work is to be measured paid for separately), within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing 12 mm (twelve millimetre) thick phenol bonded (both Side ) prelaminated BWP Grade particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Greenlam / Merinolam / Kitlam / Vista approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Structural steel work of TATA/ SAIL riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete, within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying cobble stone flooring compacted up to M 50 grade including border or kurb block grey or coloured over sub base of voncrete with 25 mm ( Twenty five millimetre thick ) average of cement mortar 1:4 ( One cement is to four sand ) laid and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curring rubbing and polishing complete ( Sub base concrete floor to be naid for 60 mm ( Sixty millimetre ) thick blocks within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying Stone work in White sand stone plain ashlar in super structure upto floor five level in cement mortar 1:6 (One cement is to Six coarse sand) including pointing with cement mortar 1:2 (One white cement is to two stone dust) with an admixture of pigment matching the stone shade within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and laying 20 cm ( Twenty centimetre thick ) composit stone masonry with stone facing of chisel dressed stone one line dressed in cement mortar 1:6 (One Cement is to Six sand ) and concrete backing with cement concrete 1:3 : 6 ( One cement is to three sand is to Six Graded stone aggregate ) 20mm ( Twenty millimetre nominal size ) on inner face of wall including centring and shuttering and proping all work in complete in as within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Providing and fixing polycarbonated tranparent sheet 1.20 mm ( One point Twenty millimetre ) thick in roofing with galvanised J and L hook bolts and nuts with G.I limpet and bitumen rubbler washers complete in with all accessories as required as per directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
steel work in single section , including cutting, hoisting, fixing in position and applying a priming coat of red lead paint gratings , framed guard , bar ladders railings brackets and similer work, within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
Kapil Sharma
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .