CONSTRUCTION OF MULTIPURPOSE HALL/ SCIENCE BLOCK/ COMPUTER LAB/ RAMP LINK PASSAGE IN GOVT. COLLEGE AT BHIWANI (PDG. E.I. INTERNAL ONLY)

Amount

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. HSR 23.3.6. 23.3.6.1) 1 run of Size 1.50 Sqmm(1/1.40mm)

23.3.6.3) 1 run of Size 4 Sqmm(1/2.24mm)

23.3.6.6) 2 run of Size 1.50 Sqmm(1/1.40mm)

23.3.6.8) 2 run of Size 4 Sqmm(1/2.24mm)

COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) HSR 23.1. 23.1.1 Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. 23.1.1.3 Group C

23.1.2 Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. switch in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe. 23.1.2.3 Group C

23.1.4 Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin socket and 1 no 5/6 Amp switch required MS Box etc complete as required. 23.1.4.3 Group C

23.1.5 Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required. 23.1.5.3 Group C

PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL HSR 23.7. 23.7.6 Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. 23.7.6.2 PVC pipe of 25 mm dia.

FITTING AND ACCESSORIES HSR 23.8. 23.8.1 Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. 23.8.1.6 Call bell 220/230 volts musical type

23.8.1.12 Bakelite angle/straight button holder large size.

23.8.1.13 Socket size rotary step type Electronic regulator for A.C. ceiling fan

23.8.3 Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite sheet as below. 23.8.3.1) 75 mm x 75 mm x 60 mm deep M.S. box

23.8.4 Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job.

Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work. HSR 23.9

Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required HSR 23.11

Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required HSr 23.12

Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as requiredv HSR 23.20

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. HSR 23.22. 23.22.1 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 23.22.1.3 TRIPLE POLE MCCB 16 to 100 Amp, 25 KA

23.22.1.5 TRIPLE POLE MCCB 200 to 250 Amp, 25 KA

23.22.1.11)4 pole MCCB 200 to 250 amp, 25 KA

23.22.1.12) 4 pole MCCB 300 to 400 amp , 50 KA

23.22.3 Supply and erection of sheet steel enclosures 1 pole/2 pole/4 pole on walVon existing pedestal complete as required. 23.22.3.2 S.P.N. or DP enclosure suitable for DP MCB

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. HSR 23.22.4. 23.22.4.5 TPN DB Horizontal type Double Door 4 way (8 incoming and 3 phase * 4 outgoing)

23.22.4.7 TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing)

23.22.4.8 TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing)

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- HSR 23.22.5. 23.22.5.1) 6 amp. to 32 amp Single Pole

23.22.5.6) 40 amp to 63 amp. MCB's TRIPLE POLE

23.22.7 Supply and erection of blanking sheet in existing distribution board.

MISCELLANEOUS HSR 23.23. 23.23.1 Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- 23.23.1.3 Size 25 mm dia

MS STAND, BUS BAR CHAMBER AND PANELS HSR 23.24. 23.24.1 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide.

23.24.4.3 Load Bank 4 way 400 amp.

EARTHING AND LIGHTENING ARRESTOR HSR 24.1. 24.1.1 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required

24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.

24.1.4 Earthing with tinned copper earth plate 6D0mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

24.1.5 Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.

24.1.10 Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.

24.1.14 Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. staples of same size.

Non Schedule items:- Supply and erection of Double door sheet, steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 125 amp as incomer (but without cost of MCCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (C&S/ Indoasian/Siemens). 4 Way Vertical

Non Schedule items:- Supply of Under Ground LT Power Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Havell's/ Grandlay/ RR Kabel. 70 Sqmm 3.5 Core Ard. Cable

95 Sqmm 3.5 Core Ard. Cable

120 Sqmm 3.5 Core Ard. Cable

150 Sqmm 3.5 Core Ard. Cable

16 Sqmm 4 Core Ard. Cable

25 Sqmm 4 Core Ard. Cable

Non Schedule items:- S/E of M.S. box for computer made of 16 guage of size 250mm x 200mm x 100 mm deep covered with 5 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfatoin of Engineer-in- Charge of the work.

M/S PANJETA ELECTRICALS